Having problems with your Vacuums ?

I have a miracle mate platinum vacuum. How do I

\015 I have a miracle mate platinum vacuum. How do I get the vinyl seal off (its on middle of canister)?\015

Answers :

You can always call the toll free number on their paper bags and ask for a service tech. They have walked me though a motor replacement after my kids sucked up water.
You pull really REALLY hard! Don't worry, you won't break it. I promise. I've had a miracle mate for 7 years now and we remove that thing all the time to blow up air matresses and intertubes and such. :) Hope that helps.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a miracle mate platinum vacuum. How do I


You can always call the toll free number on their paper bags and ask for a service tech. They have walked me though a motor replacement after my kids sucked up water. ... Vacuums

I need a operators manual for a miracle mate platinum vacuum


Hello Skip798,Please visit the link provided below for all detail for Miracle Mate Platinum Vacuum :http://miraclemate.com/platinum.html ... Vacuums

How to get the power head on a Miracle mate vacuum to work?


... Vacuums

Dead Miracle Mate Vacuum cleaner


Remove the screws at the bottom and take a flat screw driver and trace around the rubber bumper to break the seal. You then have full access to the recoil. ... Vacuums

My miracle Mate vacuum doesn't have suction.


You might have to take the hose off and blow through it, mine had the same problem and it was full of trash, it works fine now. ... Vacuums

Have a Miracle Mate Vacumm that won't power up. Suspect a bad power Switch. How does this thing come apart?


... Vacuums

Miracle mate power head not getting power - Vacuums


Most likely you have a broken wire in the neck assembly, where the wand meets the floor nozzle. To check unplug the cord and remove wand from floor nozzle. On the neck, remove 3 small screws and slide the cover off the back of the neck. You will see ... Vacuums

Miracle mate beater bar starts and stops - Vacuums


... Vacuums

How to put back wheels on a miracle mate power nozzle


... Miracle Vacuums

Miracle mate power head has no power


... Vacuums

Miracle mate overheating - Vacuums


... Vacuums

We have a Kenmore canister vacuum cleaner 25614504. It has in intermittant light and power flicker in the power mate unit as it is moving over the floor. This behavior can be simulated by jiggling the power cord where it eners the power mate. I do not know how to enter the power mate to see if there is a loose wire.


... Kenmore 28614 Canister Vacuum

Flashing on/off button hoover platinum - Hoover Platinum Collection Upright Vacuum


... Hoover Platinum Collection Upright Vacuum

Hi, I have a Kenmore Whispertone canister vacuum that I purchased in 2007. The model # is 116.22271503C, which seems to confuse the parts people. I need to buy a new powerhead & a few months ago was given a price of $75, but now Sears Canada tells me the part # is 20 116KC5OXBZRZUO1 described as Power Mate Assembly for $192.99. I thought the Power Mate was the small powerhead for stairs, upholstery, etc. Have they located the wrong part for me, or is this really what it costs?? Thanks in advance


Yes, powerheads are quite expensive. That sounds about right.\015\012You can check Ebay for better prices, but check the shipping rates before ordering. ... Kenmore Whispertone 23312 Bagged Canister Vacuum

Floor mate I have a floor mate and it will not put water onto the floor


There is a little post in the back where you insert the top solution/water tank, if you put the tank in incorrectly, (i.e., shoved it in, instead of putting it in at an angle, bottom first) there is a chance you broke it or bent it backwards. My mot ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Power mate 116.51513001 on whupertone 116.21513001. How do I open Power mate to get at the inside?


... Kenmore 21513 Vacuum

I have a Kenmore Progressive model 116.22812204 purchased 2003. The swivel (part nuumber 8195133) that attaches the extension wand to the power mate attachment snapped, so I can't keep the parts connected. I can order a replacement part on-line, but I don't know how to replace it - is it difficult to take apart the power-mate and replace this part? Do you have instructions on how to do it? Thanks!


... Kenmore Vacuums

Kenmore canister power-mate


I was able to get the whole thing reassembled.  If there is something specific that you are having trouble with let me know.  Everything snaps into its specific spot--it is just tricky to get it all lined up.\015\012\015\012\015 ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Hoover floor mate


When you place the clean water tank on the machine, there is a connection between the tank valve and the seal on the body of the unit. If you have been using the wrong solution, ie. lysol or pine sol, they contain elements that will cause the seals ... Vacuums

The power-mate for my 116.22612 makes a terrible


... Kenmore Vacuums

Why won't our Hoover Floor mate deliver water for cleaning?


After reading postings I created my own solution. I took a 1.5cm (approximate length) flush head finishing screw and screwed it into the button contact of the white memebrane and adjusted it to the necessary heigth to make the rod depress at the corr ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Unable to find recomended cleaner for floor mate, what can I use


Do NOT use ammonia...it will destroy the seals. #1 NEVER leave solution in the tank...and clean everything after every use.\015\012Lowe's and/or Home Depot have Bissels cleaner for the Hoover Floormate...also check Target and Walmart's sweeper dept. ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Owners manual for kenmore power-mate # 116


Greetings from GoVacuum,\015\012\015\012I wasn't able to find the manual for the Kenmore model, however I did find the instruction manual for the corresponding Panasonic canister vacuum cleaner. Your particular Kenmore model is actually ... Kenmore Vacuums

Need to replace belt in Kenmore Vacuum Power-mate nozzle


Hello,\015\012\015\012Here's what you'll need to replace a belt on a Kenmore canister vacuum:\015\012\015\012- Phillips Head Screw Driver\015\012- Flat Head Screw Driver\015\012\015\012There are two different ... Kenmore 23313 Whispertone Bagged Canister Vacuum

Canister motor not on - power to power mate is on


If its a long plastic tube with snaps on it that is where the fuse is.open it up and you will find the fuse ... Kenmore 25512/ 25513 Progressive Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0105 seconds