Having problems with your Vacuums ?

Headlight bulbs how do you change the headlight bulb on a 1996 mitsubushi mirage


Answers :

Think this was listed in the wrong place, this is for vacuums.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Headlight bulbs how do you change the headlight bulb on a 1996 mitsubushi mirage


Think this was listed in the wrong place, this is for vacuums. ... Vacuums

Light bulb change on Lux 4000 upright, light at base piece infront of spinning brush, made to look like long thin bulb due to plastic covering, how to open to change bulb 15 watt


... Electrolux Vacuums

I was changing a light bulb with one of those metal extension rods that unscrew and screw back in the replacement bulbs. It evidently didn't seat correctly and pulled off the bulb and created a quick "poof" type electrical short. I have switched out that bad bulb with a new one and can't get either the fan or lights to work. There doesn't appear to be a reset switch. I also swirched out the wall switch to see if that would make a difference and it does not. Any thoughts or ideas would be appreci


If you have not already done so, I would check at the fuse or circuit breaker panel to see if you have blown a fuse or tripped a breaker. ... Vacuums

Power nozzle of my S3670 does not work (vacuum itself does work), the headlight bulb in the nozzle is broken. This happened in the past several times - we would bring the vacuum to service center - I don't know what they did other than replacing the bulb. I decided to go to ACE and buy replacement bulb myself, replaced the one in the nozzle - this did not fix the problem. I don't see any fuzes or anything in the nozzle. However, the manuals says to "Use only HOOVER part no. 27317307, which is a


... Hoover S3670 Bagged Canister Vacuum

I have a Hampton Bay ceiling fan model #EC2T-36 HPF. We broke the globe that covers the light bulb when we were changing the bulb. Just wondering if you could tell me where I can buy a new globe cover?


... Vacuums

I have a light ballast that stopped working. The lights around this one bulb still work but changing the light bulb did not fix the problem. Any idea what is going on here?


The ballast is like a fuse and the ballast is blown .\015\012you will need to replace the ballast as it will let current thru for some bulbs but not enough to light them all up.\015\012also if you use old bulbs that are alomst blown and n ... Vacuums

Zephyr 24 bulb tanning bed. How do I get into it to change a ballest? Four bulbs are not burning in the backside two top and two bottom.


... Vacuums

I have a halogen light bulb with a frosted glass cover over it. How do I remove the cover to change the bulb?


... Vacuums

Singer 327 lower bobbin thread is wild and loopy after I sew...top stitch fine. Just changed to a large thread spool with the heavy remote base and crook to carry thread to machine and wonder if this changed tension (set at 4 and correctly threaded)? It had been working fine in zigzag but I also went back to reg foot and set stitch width at 0, center needle set. Thanks for your input and help. Deanna


... Singer Vacuums

I have a ceiling light with a holgen bulb that I cannot figure out how to change. The fixture has an outer ring against the ceiling and an inner ring that has the light. The inner ring tilts. I have not idea how to get into it to change the light!


From what I know you are suppose to change the whole thing. ... Alto 302000414 Attix 8 AS/E Canister Wet/Dry Vacuum

My Oregon Scientific BAR888 has 5 windows, 1. temperature, 2. humidity, 3. mb/hPa or inHg (switch at the back), 4. bars showing pressure changes over 24 hours, and 5. time/date. Window 3 gives an option to set something between 0 and 2500. Oregon say they only have one set of instructions for the BAR888 but they do not match my instrument as there is nothing included for my window 3. Trouble is I don't know what the 0 to 2500 relates to and therefore don't know what to set it at.(My model does n


... Vacuums

Change light bulb


Ok just like you would change the belt take screws out of top the cover should come off inside there is a plastic cover take it off theres the bulb ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Hoover windtunnel v2 headlight bulb


... Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum

Singer 7105 how to change light bulb


... SewShop.com Singer Model 7105 Instruction Manual

How to change the bulb on my bissell vacum


This link is for the manualhttp://uk.bissell.com/images/UserGuides/6594.pdf ... Bissell 6594 PowerForce Bagless Upright Vacuum

I want to change the light bulb on my hoover elite 600 upright vaccum. How easy is it to do and where do I start? Thanks! Brian


It should be fairly easy.You will need a flat-edged screwdriver to pry up the white/opaque plastic diffuser that covers the light - the bulb is in a socket underneath it.Pry up an edge of the diffuser with the screwdriver and ... Hoover Vacuums

I have an Hampton Bay Sidewinder Model number 312-342. The bulb is out and I would like to change it however, I cannot get the light kit to come off. Please assist.


... Vacuums

How to change light bulb in Hoover upright U5209-930 vacuum cleaner


... Hoover U5117-900 Bagged Upright Vacuum

We understand that your problem is: I currently own and use on a regular basis the Kenmore Progressive upright bagged vacuum. Model number 116.35923500. The headlight flickers and the intelliclean light stays red. Ive tried cleaning the intelliclean sensors, changed the bag, and cleaned off the agitator. Is this a power issue? Should I take it to the store? Any suggestions would be greatly appreciated


Welcome to fixya\012\012Hello\012\012 \012\012I have a solution for this ... Kenmore Progressive 35922 Bagged Upright Vacuum

Electrolux renaissance how to change power headlight


You will need to remove 5 recessed screws from the underside of the head, Then remove the cover and examine the bulb. You may need to find an AERUS Electrolux service center for parts. Might as well clean out all the dust around the motor and ... Vacuums

I can't seem to get the belt cover off of my Kenmore Progressive 400. There are two buttons that say above "belt and bulb change" but the buttons do not move. Do you know how I can remove so I can put a new belt on? Thank you!


You have to take off the top of the power nozzel that has the light lense. There are two pressure locks,one on each side. Use a screw driver to release. You will see the screws.Take the two screws out and on some models, there are two pressure locks ... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

I bought a ceiling fan from lowe's, got it home got ceiling fan up in the bathroom, when we put in the light one of the halogen bulbs does not work , also two of the cobalt blue glass covers are cracked all the way through and one of the halogen light protectors also had a whole in the end of it. I called Lowe's they told me to contact you; day of purchase was 3/1/08 in Florence Al. store code # 04810-30108. Ceiling fan bar code 0 2403478512 2. 228365 52" Helix Chrome and Cobolt ceiling fa


If this is a new product and it is defective, take it back to Lowe's and insist on a replacement, talk to the manager if you have to. This site will only advise you on how to fix it. ... Vacuums

How to get lens cover off to change light bulb


Maybe you get to it from underneath ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

How do i change an Alto halogen light bulb - Alto 302000414 Attix 8 AS/E Canister Wet/Dry Vacuum


I am sure you worked it out by now, but for anyone else who is looking; the fitting should have come with a suction cap to attach to the front of the bulb like a plunger to pull the bulb out... terrible design! \015\012Jake ... Alto 302000414 Attix 8 AS/E Canister Wet/Dry Vacuum

How do i change the light bulb janome sewist 525s Bernadette


... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0476 seconds