Having problems with your Vacuums ?

The agitator on my kenmore progressive vacuum won't keep going. It keeps stopping while vacuuming.


Answers :

This sounds like the belt that drives the beater bar on the vacuum. The beater bar bearings and brushes could be plugged with debris and/or the belt is simply worn out and needs to be replaced. Unplug the vacuum, turn it over and look for clogging.
\015\012
\015\012If you can't see any, then you may need to remove the bottom plate of the vacuum and clean out and/or replace the drive belt and clean the area. These belts and other components are usually available at Sears Hardware or main stores. Make sure you get the correct belt for your vacuum.
\015\012
\015\012If the beater bar brushes are substantially worn, it would also be a good idea to replace the beater bar as well. These parts wear out after a few years. Try to work on the unit in a location that is well ventilated and the debris doesn't make a mess inside your house.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The agitator on my kenmore progressive vacuum won't keep going. It keeps stopping while vacuuming.


This sounds like the belt that drives the beater bar on the vacuum. The beater bar bearings and brushes could be plugged with debris and/or the belt is simply worn out and needs to be replaced. Unplug the vacuum, turn it over and look for clogging. ... Vacuums

Hello! I have a Kenmore Progressive bagless vacuum with the Easy Clean extended life filter. The model number on my vacuum is 34728401. I was vacuuming the carpet when it just stopped running. The dirt sensor light will come on, but nothing else. The belt looks fine, and I don't see anything keeping the beaters from rotating. Help Please!!!


You can have power to the dirt light sensor, but it seems like the motor itself is not using the power supplied. ... Vacuums

Kenmore vacuum handle wont stay up - Kenmore 25512/ 25513 Progressive Canister Vacuum


... Kenmore 25512/ 25513 Progressive Canister Vacuum

The carpet head on my Kenmore vacuum has stopped working. It is a Kenmore progressive vacuum with a whisper belt head.


... Kenmore 23313 Whispertone Bagged Canister Vacuum

Unbeknownst to me, someone took the bag out of my Kenmore Progressive vacuum and failed to replace it. I have been vacuuming without a bag for months, and today the vacuum stopped sucking. When I opened up the front to replace the bag, tons of dirt and dust came pouring out. I thoroughly cleaned the vacuum, put in a new bag, but still no sucking power. Just dust coming from the rear vents where one of the filters is. Is the vacuum ruined, or is it a simple solution of buying a new filter?


Sounds like you need to buy a new motor. All that grit and dust will ruin a motor and I'm surprised it lasted as long as it did.\015\012This is where a vacuum that won't run without a bag would have been nice. (Aerus for one) ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Kenmore Progressive canister model 116.27514700 Problem: Vacuum motor won't turn on. The power head operates, but nothing from the vacuum. Have checked all areas of airflow: hose, bag, motor filter and hepa filter. All are fine. Have checked and rechecked all electrical connections, all seem to be in working order. Vacuum hasn't run for a week or so, so it's not the thermal protector, unless it's defective. Vacuum was running fine last week. Didn't stop operating when using. Went to v


Hello! The culprit is the PCB Assembly; Part # KC86WBZR3000...Cost is $6.99. I would remove and inspect for burnt components, or broken wires...Then clean connections both male/female using an eraser, toothbrush and alcohol...Using a bright ... Vacuums

I have a kenmore progressive direct drive handi mate jr. upright vacuum. My daughter used it last night to vacuum up some cat litter that had spilled on the floor. I went to use it today and it turned on for a second and then stopped working. I have hit the reset button but it will not turn on. Help this vacuum is only 2 years old Is there anything that I need to reset or do so that the vacuum will work again?


Its probably clogged up with cat litter.might have gotten into the motor.your motor has a motor guard inside if it. when it overheats it will shut down till it cools off.you need to clean all th cat liter out of it.and clean the filters.with a direct ... Kenmore Vacuums

My kenmore progressive canister vacuum powerhead wont stay on


... Kenmore 25512/ 25513 Progressive Canister Vacuum

Motor wont start on my kenmore intuition 116 - Kenmore 25512/ 25513 Progressive Canister Vacuum


... Kenmore 25512/ 25513 Progressive Canister Vacuum

Wheel wont turn - Kenmore 25812 / 25813 Progressive Bagged Canister Vacuum


... Kenmore 25812 / 25813 Progressive Bagged Canister Vacuum

Kenmore progressive intelliclean vacuum wont suck


... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

My kenmore progressive canister vacuum's power head has stopped working. When I check for suction from the hose, it seems strong. Could it be a belt has broken? Is this a repair that I could do myself? Thank you!


... Kenmore Vacuums

The sweeper wont move - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Beater bar stopped working - Kenmore Progressive Upright Vacuum with InteliClean System Slate Blue


Here\012 is one of my Tips on the problem you are describing:www.fixya.com/support/r6311178-vacuum_brush_bar_not_spinningIf\012 you have further qu ... Kenmore Progressive Upright Vacuum with InteliClean System Slate Blue

Kenmore progressive cannister vacuum check bag light keeps coming on and ive changed the bag


... Vacuums

I have a Kenmore progressive bagless vacuum with direct drive that was working fine but then the Inteliclean Technology just stopped working. Lights stayed green even though it should of been red.


... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Kenmoore beltless vaccum brush wont turn - Kenmore 35912 / 35913 Progressive Upright Vacuum


... Kenmore 35912 / 35913 Progressive Upright Vacuum

Agitator wont turn - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


Some of these have a resetable circuit breaker, if it has one, push it. There is a motor on the brush roll which could be bad. There also is an on/off switch, it may have a problem.Also may have a switch where the hose goes into, some models have a ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

My dyson roller stopped spinning - Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum


I had the same problem hit the reset button never heard a click but it started spinning again! ... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

I have a kenmore progressive 359235 vacuum with intelliclean. Has been great for about 3 years but now the brush bar has stopped turning. This is a direct drive unit with a circiut breaker reset button on top . The button is not tripped. Any ideas ?


... Kenmore Vacuums

My Kenmore progressive vacuum is extremely loud. The airflow and suction seem to be uninhibited, but the noise is loud and frustrating. Should the filters just be cleaned or is this a sign of a different problem? It's a Kenmore Progressive Bagless Upright Vacuum 35912 and we've had it for about four years.


... Kenmore Vacuums

HOW TO INSTALL A WHEEL STOP ON A KENMORE PROGRESSIVE


... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Kenmore Progressive vacuum clogs continuosly


Try taking the bottom off and this will reveal if you have something clogging up the flexible tube. Just did this last night there was a ton of junk clogging the tube and I cleaned it all out and put it back together now it works fine. Seems like wit ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

25512/ 25513 Progressive Canister Vacuum: HI, we have a kenmore progressive canister vacuum ...


Cord bad at male prongs, or fuse near motor blown. ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Kenmore vacuum odor - Kenmore Progressive 35922 Bagged Upright Vacuum


... Kenmore Progressive 35922 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1084 seconds