Having problems with your Vacuums ?

The cannister won't stay/lock in place

\015 The cannister won't stay in place making it impossible to use the carry handle because it just comes off. It's a Dyson\015

Answers :

There should be a release for the dirt cup at the top.make sure it in all the way and snapped shut
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a bissell bagless easy vac. When I vacuum the debris keeps getting stuck in the hose (also going into the filter area and the apparatus above the cannister with none of it going into the cannister. I have made sure the cannister is properly placed and the lock is pushed in all the way.

... Bissell 3102-0 EasyVac Upright Vacuum

Wont re-assemble I took the bottom plate off to clean out the rotary bush and can not get the plate back on! I think it is the position of the roller but no matter which way I place it when i turn it , it flicks back into the place that means i cant put the plate back on!

Assuming you did not remove the brush roller to clean it and consequently did not reseat it, I am guessing that the bottom plate is not reinstalling as it should. On some uprights, the bottom plate hooks in at the front and is latched in place with c ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

The cannister won't stay/lock in place

There should be a release for the dirt cup at the top.make sure it in all the way and snapped shut ... Vacuums

Agitator brush wont spin once vacuum is placed on floor

Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=618889&thid=573865\015\012Agitator brush wont spin once vacuum is placed on...\015\012Posted by coral7980 on May 05, 2008\015\01 ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Hose wont go back in place?

Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=34170&thid=375422\015\012Hose won’t go ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Electrical cord electric cord connection to cannister boby on filter queen is fixed by a plastic grommet or connection - how does this go into place without breaking or forcing plastic part?

It has a **** shell like closure on the inside and can normally be popped out by squeezing with pliers. It will have a slightly oval appearance, you must squeeze it round and pull. ... Filter Queen Majestic Canister Vacuum

My back wheel won't roll on my electrolux 2100. If I turn the cannister over, I can spin the wheel, but when I place it right side down, it just drags on the floor. How do I replace it?

Hi you need to find a local Vacuum repair place one that deals in Electrolux, and go there and take the vacuum or the make and model, and ask for a replacement part, that is the only way that you would be able to obtain spare parts, in fact while you ... Electrolux UltraLux 2000 Bagged Canister Vacuum

Shark steam mop wont steam anymore. just gets hot and drips all over the place.

Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop Problem ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

My new dyson upright vacuum wont click into place to stand up straight.

... Dyson DC07i Bagless Upright Vacuum

How do I attache the hose on an Electrolux Epic Cannister vacuum and have it lock into place?

If you are having trouble hooking the hose to the machine, your latch is mostlikely broken. This can be replaced. You can either buy the latch at your Aerus/Electrolux shop and replace it yourself if you are mechanical or have the service manager do ... Electrolux Epic 6500 Vacuum

The hollow tube underneath my dyson dc04 keeps coming out of position and it wont pick up. Should it be fastened into place with something.

It is suppose to swivel some. That is why it is not fastened in with a screw. It sounds like to plastic molding that was suppose to hold it in place has worn down. You will need to replaced that part. ... Dyson Vacuums

My Animal 07 hoover will only release the dust container at the top and wont clip back into place.

... Dyson DC07 Bagless Upright Cyclonic Vacuum

********** about the shop vac L250. Really chaps my --- when it's stupid filter design fills my house with dust because it wont say in place! BIG problem. I'm sure you're going to say it's operator error instead of an engineer flaw!

There is supposed to be a foam sleeve, a paper dry filter and a rubber band mounting ring. It truly is a crappy design. try replacing that foam sleeve ... Vacuums

Hi. I borrowed my friend's Hoover VC340 to clean my house. I was vacuuming when i noticed the cannister was full, so I turned the vacuum off, pulled out the barrell, and followed the instructions on the barrell to empty it. I put it back into the machine, but it wont turn back on. I tried different power outlets, but to no avail. any thoughts?

... Vacuums

Wand my extension wand wont slide into place anymore wen im not using my hoover. wat can i do?

Do you have a telescopic/height adjustable wand or just two tubes which have to be stuck together? If they are made of plastic well, it may well be broken. If its metal check that the tops aren't corroded or the handle itself isn't broken. If the tub ... Vacuums

I have a bissel proheat 2x and everything works on it except the bottom sprayer. I cleaned everything out on it and everything is in place but it wont spray. Can someone help me through this to get it working?

... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I cant get my kirby to blow out...bag is removed from seating...its plugged in...i attach the hose to the place where the bag goes, but it wont run

I did get it to work! It was a struggle, but It finally hit that hidden switch just right. The hose attaches to where the bag goes, and it just wouldnt seat properly. I suppose there might be some wear there on the hose end that twists in . ... Kirby Vacuums

Do it all kitchen wonder the wand wont lock in place

Your button is worn out cheaper to buy new wand ... Vacuums

My Dyson vacuum cleaner wont close & Open to the upright position to allow vacuuming to take place

... Dyson DC07 Bagless Upright Cyclonic Vacuum

Shampooer the small ring screen that makes the subs basically wont stay in place. no matter what i try it keeps popping off

Hi,\015\012I suggest regular scotch tape or masking tape. Just take the screen out and cut a piece of tape into strips that are just wide enough to fit the outside of the screen ring without any excess. Put the tape strip(s) around the outside ... Kirby Ultimate G Bagged Upright Vacuum

My central kenmore vacuum wont suction

Hello hdd85,\015\012I think you answered your own question when you verified that all the vacuum outlets have vacuum on them and then after you hook up tyhe vac hose, you fail to get vacuum at the other end. I would say that based on your probl ... Vacuums

Vacuum Cleaner sucking dirt out of the cannister instead of into it.

Where you put your hand is supposed to ****.are the filters dirty?if so clean them.disconnect the hose completely from the vacuum and see if you can blow through the hose,if you can't blow through the hos then the hose is clogged.you can run a garden ... Eureka Whirlwind 4496 Bagless Upright Cyclonic Vacuum

Hoover steam cleaner wont pickup water

In the front on top the cover that curves down to the floor is where the suction is .it should be plastic you can see into.its probably clogged with hair and dirt.you need tro take that top off and it comes apart in two sections .the middle seperates ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Thermax motor to the nozzle/ power head wont engage when I pug in

... Thermax AF1 Canister Vacuum

Opened the cannister to remove the bag. The tube

Steve,\015\012This may be, and I stress MAYBE an issue with lining up the snap on the collar at the end of the hose (black tube). Please look carefully, using a flashlight or other bright light if necessary, to see if there is any indication on ... Miele Cat & Dog 326i Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4489 seconds