Having problems with your Vacuums ?

Blue moon works intermittently

\015 Meile blue moon canister, 5yrs old. The power hose contacts worn, intermittent contact lost, so power head goes on/off while vacuuming. Is there a way to fix without repalcing $$$ parts? my theory is build up the trailer -like metal plug contacts by soldering/welding some how, altho could be challenging.\015

Answers :

Take the hose handle apart and look at the bottom side of the switch circuit board. Sometimes a contact or 2 break loose from the solder and will work intermittenly. Resolder the contacts if this is the case, put back together and try again.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Blue moon works intermittently

Take the hose handle apart and look at the bottom side of the switch circuit board. Sometimes a contact or 2 break loose from the solder and will work intermittenly. Resolder the contacts if this is the case, put back together and try again. ... Vacuums

Blue Moon Miele power head stops intermittantly

It is not a solid short. This is caused by static arcing in the wand and in the connectors from base to hose. I was able to fix mine by smearing some dialectric grease on all electrical parts in the wand(especially by the led switch) and in the three ... Miele Blue Moon Bagged Canister Vacuum

Have a Miele S658 Blue Moon that cuts out intermittently, sounds like most of the solutions to similar problems indicate the circuit board has gone bad in the hose mechanism.......can just the circuit board be replaced or does the entire hose have to be replaced?

Probably needs a new hose. ... Vacuums

My electrolux Epic 6500 power nozzle Model N109J will not work. It had an intermittent short which I thought I fixed (some of the insulation on the wires were pinched). I fixed the wires and it worked intermittently for an hour then shut down completely. Could the reset switch have a short? When I press the switch nothing happens.

The switch is definitely a possibility, but other problems can also cause this.\015\012Bad switch, needs replaced.\015\012Broken wiring in power nozzle, wands, hose, or canister.\015\012Bad PN motor.\015\012\015\012I str ... Electrolux Epic 6500 Vacuum

Miele Blue Moon vacuum has no power

It sounds like the logic board fried on you. Your local Miele service shop should be able to fix this for you right away. ... Miele Blue Moon Bagged Canister Vacuum

Miele Blue Moon vacuum has no power

It can be various problems, the cord reel contacts or cord may be bad, You didn't give the model number, but alot of Miele's have a speed control that goes bad. It will have to taken aprt and checked. ... Miele Blue Moon Bagged Canister Vacuum

Electrolux oxy 3 vaccum has stppoed working and all three blue lights flashing My electrolux oxy 3 ZO6330 stopped working suddenly and all lights are flashing. I've changed the bag and filter and its still not working. Any ideas??

... Electrolux Vacuums

Power nozzle works intermittently

The pin connection from the lower handle tube to the power nozzle are not making good contact. It is new, so i would have warranty service performed. ... Vacuums

The telescoping wand on my kenmore magic blue cannister vacuum stopped working shortly after I bought it a few years ago. After 10 minutes of pushing sometimes I get it to work. It gets longer easier than shorter. What could be causing this problem? Please help!

... Kenmore Magic Blue 24195 Bagged Canister Vacuum

I have a windsor vsp 14, it is making a bad grinding noise, when I take the top blue piece off it stops, the brush works fine and when I put the top back on it grinds really loud and gets hot. it still vacuums and the belt and brush are working fine, can't figure it out. and when the lid is on I cant see what its grinding on. It only makes a grinding noise when you pull handle back and engade to vacuum flor and stops when you put it upright.

... Windsor VS14 Versamatic Bagged Upright Vacuum

I have a hoover Core vacuum. The problem is that the blue light flashes (as normal) when it is plugged in and the power is turned on and the blue light stays on (as normal) when you turn it on at the button but it makes no noise and doesnt work. All of the filters are clean. Can you help please?

... Hoover Vacuums

I have an eye vac professional that will not stay on to **** up the dirt. There is power to the outlet and the blue on/off light does stay on, but in Auto mode if I stick my hand near the dirt sensor it just pulses on and off. I can feel the suction, but it won't stay on. I've unplugged it, removed the dirt bin and filters and nothing works. Help!!!! This is brand new and I've only emptied the collection bin once and it hasn't worked since.

... Vacuums

Blue sparks from motor stopped working

Either cord shorted out or switch failed would replace cord first if that doesn"t work probably have to take into repair shop ... Kirby Vacuums

Started to work intermittently, then just stopped

Is the controls to this machine in the hose. If so, then the hose is going bad. That is pretty typical for these models, ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Bissell Spotbot Pet Model # 33N8A. "Hose" button is only one that works, and only intermittently.

... Bissell Vacuums

What causes my Shark Vacuum to work only intermittently?

If the brush roller operation is intermittent, there may be hair jammed inside the end caps. The brush roller can be removed and the end caps also for inspection. Intermittent operation also can be caused by a stretched drive belt.\015\012The per ... Shark Navigator Bagless Upright Vacuum

Beater bar works intermittently

When you push the hose into the tube, there is an acuator that will push the switch so the beater bar will turn. That switch could be just dirty, dust gets in them and they won't always work, the acuator may need to be replaced. Either that or you ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

On switch on dyson dc41 works intermittent

... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Hoover Savvy on-off switch does not work (very intermittant)

Hi All-\015\012 \015\012I found the solution to this issue. You need to take the switch apart. Having a set of small jewelers screwdrivers from radio shack helps a lot. \015\012 ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Brush wont work - Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue

You probably need to change the belt. You can get a replacement here:Bissell Healthy Home Belt ... Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue

GE on/off timer for a bathroom fan - switch has four wires Green - ground White - neutral Black - power Blue - lead My fan has two - white neutral and black lead I have tried every configuration and cannot get the fan to work. Any suggestions?

I would guess that the black wire on the timer is the power in and blue is the power out to the fan (hook it to the black wire going to the fan) The other colors are right. ... Vacuums

I havwe a Breville Brita Aqua Fountain water cooler about 3 years old. Only some of the blue lights are working and the motor appears to have stopped. Power is getting to the machine and I wopuld like advice as to how I can check further before scrapping

... Vacuums

The blue neon light on my harbor breeze fan no longer works. Where can i get a replacement?

It may be the little board that the neon bulb pluggs into. check Ebay for a replacement. Ebay usually has what I need for stuff. ... Vacuums

Electrolux oxy 3 vaccum has stppoed working and all three blue lights flashing

You need a new hose http://evacuumstore.com/p-1298-electrolux-oxygen-3-ultra-vacuum-cleaner-hose-genuine-el7020 ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

Dear Sir: I just purchased a Bissell Rug Shampooer at a garage sale. The only thing I find for a model is on the back and it says Model 1695 there. Nothing on front. It is Navy blue and has a grey tank on it with a smaller one inserted at bottom of the large tank. It has two switches on the back of it and the trigger switch at the handle. The cleaner works, BUT, it does not extract any water back into the tank that is to pick up the dirty water. Could you suggest what I may look at t

... Bissell Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0558 seconds