Having problems with your Vacuums ?

Eureka powerline gold

\015 The brush is rotating, but it is not sucking.\015

Answers :

If no suction, then you have a clog either in the hose, the dirt inlet by the brush roll, or bad filters.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Eureka powerline gold


If no suction, then you have a clog either in the hose, the dirt inlet by the brush roll, or bad filters. ... Vacuums

Change belt for eureka powerline 4773 - Eureka Powerline LiteSpeed 5845 Upright Vacuum


... Eureka Powerline LiteSpeed 5845 Upright Vacuum

No suction eureka powerline - Eureka Powerline LiteSpeed 5845 Upright Vacuum


... Eureka Powerline LiteSpeed 5845 Upright Vacuum

HOW DO i CHANGE THE BELT ON MY EUREKa powerline 4773 AZ


... Eureka 4700A Maxima Bagless Upright Vacuum

Download eureka powerline plus manual - Vacuums


... Vacuums

Eureka powerline limited edtion model number 4352


... Vacuums

My eureka powerline will not vaccum anything stuff is flying out of it and there is a lot of dirt in the hose how do I get it out??


Straighten a coat hanger and pushit up the hose and hook it out or push it through ... Vacuums

The brushes on my eureka air speed gold will not turn


... Eureka AirSpeed Gold Bagless Upright Vacuum AS1001A

Sucked up a ping pong ball with vacuum - Generic Eureka airspeed gold upright


... Generic Eureka airspeed gold upright

How do you replace a belt on an eureka powerline


... Eureka Powerline LiteSpeed 5845 Upright Vacuum

Eureka powerline 4773


... Eureka Vacuums

How to replace/repair power cord in Eureka Powerline Bravo upright vacuum


... Vacuums

Just need to know how to change the belt on my Eureka AirSpeed Gold Bagless Vacuum


... Eureka Vacuums

Eureka powerline Limited Edition


... Vacuums

Eureka powerline bagless vacum


... Eureka Maxima 4700 Bagless Upright Vacuum

Need manual for Eureka Powerline Plus Model 9730 Type A - missing "door" that covers tool access port on body of upright motor...any ideas? This causes dirt to fly out unless tool hose is placed in "port"--don't always want to use tools, just main vacuum.


I found it at www.vacpartswarehouse.com for $4.79 + sh ... Eureka Powerline LiteSpeed 5845 Upright Vacuum

Need to replace belt on Eureka Powerline 12.0 vac. Screws look like Torx head or something on bottom of vac. Are those the screws that need to come out for changing? If so, what size do I need?


No, do not remove the torx head screws for a belt change. If there are any screws that need to be removed for the belt change, they will be phillips head. What is model # of vac?? ... Eureka Vacuums

HOW DO i CHANGE THE BELT ON MY EUREKa powerline


Turn the vaccum upside down and unscrew the screws in the bottom, pop that cover off and you should be able to remove the wheel assymblie. take the old belt out,slide knew one over the shaft and replace the cover and screws ... Eureka Powerline LiteSpeed 5845 Upright Vacuum

Eureka Powerline Superbroom Model 296 Type A Serial # 9730005452. I can not turn the nob to make the cleaner come on.


... Vacuums

The brushes on my eureka air speed gold will not turn


... Eureka AirSpeed Gold Bagless Upright Vacuum AS1001A

Having trouble getting the filter back in a eureka gold bagless upright


... Eureka AirSpeed Gold Bagless Upright Vacuum AS1001A

Eureka powerline central van not sucking


... Vacuums

Hello, I have a problem with my Eureka Powerline bagged upright vacuum. It has a 12 amp motor and is model #4352, Type D. It was probably bought new in 1998. My problem is, while vacuuming today the motor seemed to slow down all of the sudden and then began smelling like burning rubber. I shut the vacuum off to check for blockages but could not find anything blocked. When I then turned it on again it runs but seems to only be running at 1/2 the motor speed and still has the rubber buring smell.


It sounds like a rubber sealing in the motor has come loose and is being constantly rubbed against the walls of the motor with would cause the smell and loss of motor speed caused by the fricton of rubber against the rod so if you can get to the moto ... Vacuums

Looking for Eureka belt 70646A for a Eureka The Boss upright


I just replaced the belt on my Eureka The Boss Smart Vac (Model 4870D). I purchased a namebrand Eureka R belt from a local vendor. I did my best to follow the instructions printed on the bottom of the machine. I turned on the vacuum cleaner and the ... Vacuums

Change belt on a eureka - Eureka Vacuums


With the vacuum unplugged, turn the machine beater side uo. On the plate that surrounds the beater bar, look for release tabs to open the plate. Flip them and set the plate to the side. The beater bar rides in sockets. Remove the bar, install the ... Eureka Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0167 seconds