Having problems with your Vacuums ?

Bissell powertrak is stuck in the high position, knob moves/changes but the height stays on high


Answers :

Hello. The height of the wheels Will stay in the highest position until you release the handle release lever. At that time the adjustment will happen. I hope this helps. let me know.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bissell powertrak is stuck in the high position, knob moves/changes but the height stays on high


Hello. The height of the wheels Will stay in the highest position until you release the handle release lever. At that time the adjustment will happen. I hope this helps. let me know. ... Vacuums

Sebo x1 auto height adjustment stays high


... Sebo Automatic X1 Bagged Upright Vacuum

Bissell 3576 height adjustor broken


Hi Chris! Lock the vacuum in the upright position, set the height adjustment to the desired setting, then recline the handle for the change to be made.If you continue having difficulty, you may want to have one of our Authorized Service Centers i ... Bissell 3576 CleanView II Bagless Upright Vacuum

Bissel powertrak brush is stuck - Bissell 6591 Power Trak Revolution Bagless Upright Vacuum


... Bissell 6591 Power Trak Revolution Bagless Upright Vacuum

The adjustment knob for bare floor will not stay in position


Broken catch. recommend dyson service as it is not user replaceable. ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

How to replace Bissell PowerForce vacuum cleaner model 6583-2 height adjustment knob?


... Vacuums

Kirby vacuum height adjuster is stuck in high


Remove the nozzle and remove the front wheel shaft. Take these 2 screws out.When doing so - watch for the spring that is under the top pedal, ... Kirby Ultimate G Bagged Upright Vacuum

How to replace Bissell PowerForce model 6583-2 height adjustment knob?


... Vacuums

Have a Bissell proheat steamer. Will not heat up. Is there a reset for for heat switch. I beleive just needs reset. The switch, the way that it feels gives me this indication. Switch will not engage and stay switched to on position. J.J.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Deep Cleaner Upright Vacuum

I have a bissel proheat carpet cleaner. THe trigger is stuck in the on position. However, no water or shampoo is coming out. I can pry it back out but it feels like a spring is missing or something like that.


You may need to replace the handle assembly, or at least take it apart and reconnect the spring inside the handle..here is the repair manual, which has good illustrations on page 9 and 22 of working on the handle..http://newz ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

How do I put the height adjustment knob back together on the bissell power force helix upright vacuum


... Vacuums

Height adjustment knob on Bissell upright will not turn


... Bissell 3920 Bagless Upright Vacuum

My Bissell 5570 is not staying on. When I push the on botton it goes on but as soon as I remove my finger the machine turns off. The Vacuum is in the upright position and there are no cuts in the electric cord, the canister is properly attached. Please advise. Thank you


... Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue

Oreck trouble I replaced the plug and switch. black from motor to pole 1, black from plug to pole 2, white tied to white with a wire nut. When I plug it in it is powered in the off position. I have high speed at the high speed position, low speed at the low and off positions. Any ideas?


... Oreck XL Ultra Bagged Upright Vacuum

Hi! I have a Pfaff Creative 1475. The presser foot seems "gummed up" or stuck. The back lever lifts it with great force, but then instead of staying up like the lever usually does - it then falls back down. The lifting foot stays stuck up and I have to push on it to get it back down. Help?


Bdfbjhfjffjfjfjfjfjfjfkfjfjffjfjfjjfjfjfjfjff ... Vacuums

Dirt Devil Vison Bagless Upright- adjustment wheels will not stay in position


... Vacuums

The vacuum is making a noise like something is stuck when it is in the carpet position but not when in the floor position. I can't find anything that is stuck in the areas that I can see. I have cleaned the brush but it does not seem to want to turn. Does this machine need to be oiled so the roller will turn? Is there a way to check inside the motor? Do you think that because the brush won't turn that is making the noise? Do you know of any repair shops in the Lake Havasu City, Arizona area?


As far as the roller brush goes, yes, it does need to be cleaned. Follow the directions to remove it and clean as best you can of all debris. On both ends of the roller brush there will be two "holders" of sort that connect the brush to the frame o ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and the Carpet/Bare knob is moved to the Bare Floor position and then back to the Carpet position. Then the beater bar turns until the handle is placed into the upright position. What might be the problem?


Hi its Darran at Dyson.The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces when you have the ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Bissell powertrak revolution dirt not going into cup


If the unit is not blocked between pickup and filter have a good look at the filter to see if air is passing through it---paper throwaway or foam filter the can be washed?The ones that can be washed etc will have instructions right on them. ... Bissell 6591 Power Trak Revolution Bagless Upright Vacuum

Bissell 3920 height adjustment not working


... Bissell 3920 Bagless Upright Vacuum

The control knob for High trafic,Normal,Water only came off How do you put it back on


Never heard back from you, here is a picture:\015\012\015\012 ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Bissell aroma pro upright carpet cleaner wont push foward keeps getting stuck


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Still dont know hot to get height adjuster knob to work. tried handle all the way back n lay on side solution that was offered. the plate has a permanent place to sit. hows it possible to bring knob


Hey, not having a working height adjustment can be a bear. Lock the vacuum in the upright position, change the knob to desired setting, and recline the handle for adjustment to occur. If you are still having difficulty, you may want to have y ... Bissell 6594 PowerForce Bagless Upright Vacuum

Carpet height selector not working on Eureka The Boss SmartVac


... Eureka Smartvac 4870 Bagged Upright Vacuum

Height adjustment on Hoover Windtunnel u5755-900 no longer works


On this model it is only a single slide adjustment lever. have you trie to tilt the vac backwards (lifting the wieght off the front wheels) and then slide the adjustment lever?\015\012\015\012If there is a mechanical issue with it. take t ... Hoover Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0558 seconds