Having problems with your Vacuums ?

Removing impeller from sears shop vac

\015 How can I remove an aluminum impeller from a sears shop vac?\015

Answers :

The impellar will screw off with a clockwise rotation and the new one installed with a counter-clockwise movement.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Removing impeller from sears shop vac


The impellar will screw off with a clockwise rotation and the new one installed with a counter-clockwise movement. ... Vacuums

How do i replace the impeller on shop vac qps20?


... Vacuums

Have a Sears shop vac, mod 113.172. The motor doesn't take in


THE HOLE THAT CATCHES THE SUCTION BALL CAN BECOME BLOCKED LETTING DUST GO THRU THE MOTOR. ... Shop Vac 925-13 Canister Wet/Dry Vacuum

Model number U5763900 Serial Number 090400013588 Handle broke off just above the four screws that attach it ti the boby of the vac. Hoover does not list parts for models that are more than two years old. The vac operates perfectly but without a handle my wife cannot use it, where can I find a part replacement. easy to remove four screws and replace. dont want to drive 100 or more miles to find a authorized repair shop. Oh yes, this is a Hoover Preferred Wind Tnnel Bagless


Get over it and buy a new one!!! ... Vacuums

I have a Shop vac model 90L550A wet/dry vac. Do I remove the cartridge filter when I install the disposable filter bag?


... Shop Vac 925-09-62 QSP Plus Wet/Dry Vacuum

Where can I find a part for my BV2000 in house vac? It is the smallest unit made by M S & S Systems in Dallas TX. The suction impeller is grinding in it's housing, so I need a motor/suction pump. I have removed this combination from inside the vac assembly


You will have to replace the whole motor as these motors where never made to be serviceable. if you take the motor to a local vacuum shop than can order you a new one. though i would recomend replacing the whole tank unit with a Nutone or Hayden they ... M&S Systems BV-2000 Bagged Canister Vacuum

Is there a trick to removing the hose from the main tub so I can remove the filter bag on a wet/dry shop vac with detachable blower Model BLB550?


... Vacuums

I have a qsp shop vac 10 gallon upright need elastic and filter sears is where i purchased it but can't find the replacement filters


Try e bay. ... Shop Vac 285-00-10 Back Pack Vac Wearable Wet/Dry Vacuum

I have a craftman shop vac model 500A , 5GAL.,1.25hp. why does Sears say that's not the model num. IT'S THE ONLY MODEL NUM. ON IT!!! IF IT'S AN OLD MODEL,WHY DONT THEY SAY IT IS THE SAME AS MODEL#***** AND WHY DOESEN'T THE FILTER,BAG'S ect.SAY, WILL ALSO FIT MODEL 500A


... Craftsman 17765 Canister Wet/Dry Vacuum

How to remove the filter on a craftsman 2.5 hp shop vac?


... Vacuums

Sears 16 gallon shop vac that smells like rubber burning when running


... Vacuums

Do you remove the filter when vacuumning water with a dirt hawg shop vac?


The cartridge will slide off an internal housing cage which contains the float. Look for a knob, thumb tab or dial at the bottom of the cartridge and rotate bay hand. Always wipe the area where the filter meets the vac body before reinstalling and d ... Vacuums

The impeller on my shop vac is not tight on the drive shaft. Should there be some play in it and if not how do I tighten it?


... Shop Vac ShopVac 3 HP 2 Stage 10 Gallon--Automotive Wet/Dry Vacuum Vacuum

I have a shop vac. model 500x 1h.p. Center section speratedon impeller cost of new ? or throw away ?


If it didn't cost you too much i would throw it away and buy a new one.you might want to call a repair shop and get an idea what it would cost to repair.my guess it probably won't be worth it ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Do you remove filter while vacumning water - Ridgid 9 Gallon Wet/Dry Shop Vac 96882 Canister Vacuum


Nope. You leave it on. It is OK to do that. It also will rinse the debris out of it too. ... Ridgid 9 Gallon Wet/Dry Shop Vac 96882 Canister Vacuum

Trying to remove a hose from my wet/dry shop vac model 338179370? Any suggestions.


... Craftsman 9-17765 12 Gallon Wet/Dry Vac, 5.0 Peak HP

My shop vac is plugged. The hose is clear. The filter is removed. The filter bag is not installed. It still won't draw a suction. It sounds like it is plugged. The motor whines at a higher-than-usual pitch. What can I do?


Turn off the vac, take the head off of it and remove the filter paper. Inside, there's a white ball (bigger than golf ball, smaller than baseball) that's inside a cage. This is designed to keep water out of the blower when the vac tips over, and sh ... Vacuums

Can't get top apart on Sears Shop Vac to take out switch !! All screws out


... Shop Vac 925-13 Canister Wet/Dry Vacuum

I have a Sears shop vac.... i tipped it over this morning and the filter came off. No big deal, but there was a plastic or PVC cup inside, and i can't figure out whether the opening of this cup should face up [ceiling] or face down [floor]. I can't find my manual around, so i need help..... seems like it's leaking dust from the out port now, so.....?


You may need to better describe the cup on the filter, but if it has a handle on it, it's the end cap. The handle part will face the floor and you should be able to screw the cap on, securing the filter. ... Vacuums

I have a Sears #113.177331 wet'dry shop vac. I have the motor out and want to know how to change the brushes. Thanks...Steve


... Shop Vac Vacuums

We have a series 90S, 2.5 gallon Shop Vac. We used it for the first time to try and **** up water in the basement. Each time we turned it on, it would shut down after collecting less than 1" of water. We had to remove and squeeze out the foam sleeve each time, before it would work again (nowhere near 2.5 gallons!). Any ideas? Is the plastic sleeve that can move up and down inside, the float (poorest manual I've ever seen!)? Should there be a ball float that we're missing? Thanks for any s


Remove the foam sleeve when using the unit to pick up water.\015\012The float is in there to indicate when the unit has "enough" water in it. The float rises with the amount of water and when the water reaches a certain height the float is "pulled" ... Shop Vac Vacuums

Need to remove shop vac motor, what size torx


... Vacuums

How to attach hose to shop vac hang up mini - Shop Vac Shop-Vac& Mini Hang Up Wet/Dry Vac Vacuum


... Shop Vac Shop-Vac& Mini Hang Up Wet/Dry Vac Vacuum

Need a manual for the shop vac model # 2E200 - Shop Vac Shop-Vac& Mini Hang Up Wet/Dry Vac Vacuum


... Shop Vac Shop-Vac& Mini Hang Up Wet/Dry Vac Vacuum

How to change mini shop vac filter - Shop Vac Shop-Vac Hang Up Mini Canister Vacuum Cleaner Vacuum


... Shop Vac Shop-Vac Hang Up Mini Canister Vacuum Cleaner Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0534 seconds