Having problems with your Vacuums ?

I have a hoover elite 200 it did not have a belt on it when i got it and i cant find the drive shaft.


Answers :

You must remove the lid of the vac and find the pulley end of the brush. directly behind it one hand length you will see a small silver shaft. If the shaft is other than silver it is coated with burned rubber. or rust and dirt.
Clean off the burned rubber polishing the shaft with wet dry sandpaper . Then rotate by hand to test for any blockage in the motor fan. Also rotate the brush roll to see that it spins freely. Using a genuine hoover ELITE belt wrap the belt around the motor shaft and brush roll and use the brush to stretch the belt forward as you lower the brush into place. Once seated , rotate the brush again to see that the belt is turning, then reinstall the lid. Do not pick up anything larger than your fingernail or you will blow the fan on this unit.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a hoover elite 200 it did not have a belt on it when i got it and i cant find the drive shaft.


You must remove the lid of the vac and find the pulley end of the brush. directly behind it one hand length you will see a small silver shaft. If the shaft is other than silver it is coated with burned rubber. or rust and dirt. Clean off the bu ... Vacuums

Model number U5763900 Serial Number 090400013588 Handle broke off just above the four screws that attach it ti the boby of the vac. Hoover does not list parts for models that are more than two years old. The vac operates perfectly but without a handle my wife cannot use it, where can I find a part replacement. easy to remove four screws and replace. dont want to drive 100 or more miles to find a authorized repair shop. Oh yes, this is a Hoover Preferred Wind Tnnel Bagless


Get over it and buy a new one!!! ... Vacuums

Hoover Elite II Model # u4689-910 Impeller replacement


I have had to use a dremmel tool to cut the plastic around the shaft, you can also something sharp and a hammer to break away the remainer of the fan. There are no threads on the fan so to keep truning it may or may not get it off. Just have to wat ... Vacuums

I have a Swan Petmaster 1800w Hepa Filtration hoover s/r no SU3021 and cant find my instruction manuel. Problem is when on hoover it doesnt seem to be sucking anything up?? I have cleaned the cylinder and filters. Is it something to do with the bit that you can use to clear stairs/car etc and not converting back to an upright hoover again? Please help Julie


... Vacuums

I am a professional maid and one of my clients just had her Hoover Elite Vacuum belt break. I bought the belts ... but cannot find a manual online and do not know what the model number is. I am scheduled to be in her home in exactly one hour! HELP! HOW DO I CHANGE THE BELT -WHEN I CANNOT FIND A MANUAL? Many Thanks! Lynn


This is no problem! You will need a flat blade screwdriver and about 10 minutes! \015\012 \015\012*Always use genuine hoover parts for repairs, discount store belts can be as much as \015\0121" longer than OEM parts ... Hoover Elite U5061-900 Bagged Upright Vacuum

Users Guide Does anyone know where i can find a copy of the users guide for the hoover floor mate? I cant find mine anywhere...thanks


Go to: http://www.hoover.com/pdfs/manuals/H3030.pdf ... Hoover H3030 FloorMate SpinScrub 500 Upright Wet/Dry Vacuum

Powerhead woes Drive belt for power head beater brush on Hoover S3755 keeps jumping off drive motor shaft when vacuuming low pile carpets like oriental rugs unless minimal suction is used. Any tricks to keeping the belt in place other than this?


I've had my Hoover S3755 for about 2 years and loved it, at least until the last couple of months when the "belt slipping off" problem started. I changed the belt and the vacuum would work for a little while then the belt would come off again. I pu ... Hoover S3755 WindTunnel Bagless Canister Vacuum

Cant find info on hoover soft and light model u 427-930


... Hoover Vacuums

I have a Hoover z 700 the "see manual" light keeps coming on when im using it! I cant find the manual can you help me?


Hi (dont forget to rate this please)\015\012Go to hoover.com website here:\015\012\015\012http://www.hoover.com/CustomerService/Man ... Hoover Vacuums

How do I clean out the suction side of a Hoover steam-vac Model#f6020-900. I took all the screws out and still cant get it apart.I vacuum before using it, but it still seems to find more hair.


These don't come apart. Hoover makes a thin long tool that will allow you to stick up into this suction side to clean it or use a long piece of galvanized metal strip to slide up into it and clear away the hair. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have an old Hoover vacuum model # U5035-930. The belt broke and I tried replacing the belt myself. I couldn't stretch the belt to attach it to the motor pully. It was belt # 38525-027 M6. Which I got from the previous owner. I took it to a vacuum repair place and he replaced it with belt # 38528-027 J4. I cannot find this belt anywhere.


... Vacuums

My Hoover Deluxe Rewind Elite will not pick up anything. My daughter got something caught in it last night and it made that noise when you get something hung. We turned it off but today it will not work. Is there a reset button?


When you are saying "today it will not work" do you mean the motor runs, but the unit will not vacuum, or are you saying nothing happens when you try to turn it on?If the motor run's, the belt probably broke. You will need to remove the b ... Vacuums

Motor started making a grinding sound and has a burn order. I found a site that sells parts such as motor assembly but I can not find a repair manual to provide disassembly instructions. It does look like this is a direct drive unit, that is no belts, at least none that a user can relace.Know of any repair manual sites? It is a Hoover F5899-900 SteamVac


... Hoover F5899-910 SteamVac Vacuum

Need the manual on how to run (put together and all) the hoover steam vac v2 (widepath) with auto rinse) we tried today and when we leaned it back (so we could run it on the carpet) water started pouring out all over the machine and got the carpet (like flooded) wet :( this one was me mom's and she passed on approx 2 1/2 years :( she always kept the manuals for everything but we caint find this one :( ... thnx


God Bless Your Mom.\015\012\015\012Hope this was helpfull to you. Sawdust46\015\012\015\012http://www.hoover.com/pdfs/manuals/F7411900.p ... Vacuums

Cant find spare belt to order for my hoover. It's an upright durabrand model no. ymh29046. Then typ cbu1


Are you sure that your vacuum is a Hoover? There is a brand called Durabrand that makes vacuums but they are not related to the hoover brand. ... Vacuums

Cant find manual for model f5880-900 hoover steanvac spinscrub dont know how to attach upholstery parts


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have just got a secondhand hoover aquamaster s4470 and cant work out hoe to set it up to wash carpet


Have you tried the manufacturers website. sometimes you can download the manual for your appliance ... Hoover Vacuums

Hoover steam cleaner spin scrub brushes wont turn cant find belt


I just brought mine home...assembled per instructions and tried all the troubleshooting thus far to no avail. So I popped off the brushes per instructions and took a screwdriver to the hole where the brushes axle inserts underneath the vacuum and tur ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have the Hoover Deluxe Elite Rewind with the 24 ft cord reel. I can't seem to find the instructions or a model # exactly for it. The vacuum is just over a month old but when I turn it on now it's not sucking at the bottom and the hose and everything else appears to be attached so I don't know why it's not working.


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=572145\015\012Generic problem for all Vacuums\015\012I have the Hoover Deluxe\015\012Posted by y2kas32 on May 05 ... Vacuums

I bough a vacum make Hoover model Freespace cant seem to find this model anywhere on the site also need to buy bags and dont have a bag number in leaflet


We can supply these bags approx £8.95 +p&p ... Hoover Vacuums

I have a typhoon cyclonic 2400watts hoover and i cant find anywhere that sells parts i need the long stretch pipe could you help by telling me where i can get 1 from


... Typhoon Vacuums

For Hoover canister cleaner model S1361, the power cord got stuck inside and cannot be pulled out or rewind, need help. What can we do? We live in Springfield Drive, Richmond BC V7E 1Z1. Thank You!


... Vacuums

Roller got power cord. This stretched out the belt. I replaced the belt, now the vacuum is making a noise. Cant find anything wrong, what could be making this noise?


Most rollers have several different positions you can install the brush in check and make sure the roller height is equal. ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

I am having trouble with the nozzle control knob on my Hoover Elite Upright. I was cleaning out the bottom of the machine and the knob fell out and now I cant align it properly. It seems loose and not doing anything when I move it


Hello : My advice to take it to the service if you still have the guarantee . Or provide detailed information about your Hoover to get better help . good luck . ... Vacuums

Hoover UH70120 WindTunnel TSeries problems with the cord. im a tech savy guy and have been trying to fix a cord after it was pulled to far out and now wont auto retract, but just cant find a way to pull the cord rewind mechanism out to work on it. Any advice


You will probably have to replace the cord winding mechanism. I have never had any luck trying to repair one. Cord retracters are great when they work but it seems like they always go bad before too long. On many units you can't even replace the cord ... Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0579 seconds