Having problems with your Vacuums ?

Rotating head does not rotate

\015 I have cleaned the head, looked down the hose and can see nothing,felt that the suction at the end of the hose is very strong, and cleaned the internal dust filter and dried it. Still the rotating head does not rotate. Any clues?\015

Answers :

Check for broken belt in the brush roll compartment and replace
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Brush head not rotating. Press rotating button and head does a little jump but no more. No build up of debris on head.


... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Rotating head does not rotate


Check for broken belt in the brush roll compartment and replace ... Vacuums

Dyson dc25 animal - head won't stay on the floor - doesn't seem to be rotating correctly


... Dyson DC25 Animal Bagless Upright Vacuum

DC 23 Turbine - Power Head will not rotate, I have cleaned it there is nothing blocking it but it does not appear to have any suction or rotate


Next to the start button is another button. This is to switch the brushbar on and off ... Dyson Vacuums

I have a problem with my EIO Topo 1800 W vacuum the turbo head is not rotating and although it appears to have suction when I go to use without the head it is not suctioning, there is a red light near


... EIO Vacuums

I have an EIO TOPO 1800W max my style machine, the turbo head is not rotating and although it feels like it is sucking when I go to use without the head it's not sucking, the red light is on where


... EIO Vacuum Cleaner Filter

Turbine head brushroll doesn't rotate and no suction


Have you tried washing the filters? The pre-motor filter (the one in the plastic housing) can get really clogged. Hold it up to the light, if you can't see through, it is full of dust. You need to really scrub it with a brush to get the dust out (or ... Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum

My dyson dc32 turbine head is not rotating even i have pulled the red round thing and it is noisy help


... Vacuums

Cleaning rotating brush on vacuum head


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson animal 19 head won't rotate


... Vacuums

Turbo head is not rotating for carpet cleaning


... Dyson Vacuums

I've had my Kenmore Progressive canister for at least several years and never had a problem. Now, the carpet head brush does not rotate, it's not getting the connection unless I push down maintaining pressure on the handle.


Hi, try pushing the reset button with a pen or paper clip. If that doesn't work, the motor may need to replaced. If the reset button is stuck, if the reset button is stuck, use a pair of tweezers to pull it back out......\01 ... Kenmore 25512/ 25513 Progressive Canister Vacuum

I bought a G5 (w/ all the attachments) at a lawn sale. It works as in the motor seems to run fine and the brush head rotates, but.....there's no suction. Is there another button or lever I need to push/pull?


This link is for the manual it may help you.http://kirby.110mb.com/docs/kirby_sentria_manual.pdf ... Kirby G5 Bagged Upright Vacuum

I need to know how to disassemble the power head for my pet vac. the brush no longer rotates, and it severely limits the quality of vaccuming. we have dogs, so it's really important for this thing to work at it's best!


... Euro-Pro Shark 18Volt Pet Perfect II Cordless Handheld Vacuum Cleaner

Cleaning solution does not come out of the rotating cleaning head or the hand-held nozzle the solution pump seems ok but does not run (electrical continuity check between the two leads on the pump show very low resistance so they seem to be intact) - no dirt or blockage is apparent (it is a very simple device with 1 moving part wires to the pump also pass a continuity check THERE IS NO VOLTAGE on the pump leads from the control circuit board when I turn on the "manual" cleaning mode - a


You can contact Bissell directly at the following\015\012\015\012For UK inquiries:\015\012Monday - Thursday 9 am — 5 pm\015\012Friday 9 am — 4 pm\015\012\015\012BISSELL Homecare (Overseas) Inc ... Bissell SpotBot Robotic Wet/Dry Vacuum

The head of the Dyson 25 has stopped rotating


Hi its Darran at Dyson. It may be that the brush bar needs to be re-set. To do this, switch the machine off, press the brush bar on/off button once and then switch the machine back on. When lowered into the vacuuming position, the brush ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

I just accidently vacuumed over a bag, realized what had happened and pulled it out before it got stuck further into the head of my Hoover Wide Path. I shut the machine off, and when I turned it back on the brush won't rotate. Anything I can do?


IS THERE A RESET BUTTON ON THE MACHINE? SOME OF THE MATERIAL FROM THE BAG MAY BE WOUND AROUND A PART OF THE BRUSH. ... Vacuums

My power head (carpets) does not rotate at all. I have called Dyson and they walked me thru a series of steps to make the roller move, which initially worked, but now when it rolls it's really slow and stops rolling.


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

The roller in the power head will not rotate-- replaced belt & that is not the problem--now what do i check? the right end will move, but the left end seems fixed-- is that correct?


Sounds like the bearings froze up. ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

The vacuum is on and sucking--but the beater bar will not turn on. Its not that its not rotating, the motor sound from the head does not come on.


If it is anything like ours, it is the circuit board. Needs replacing and like everything else Miele, it is expensive. Wish I had gotten something else. Tired of throwing money away to fix our Miele! ... Miele S318 Bagged Canister Vacuum

The brush head on our Dyson DC34 rotates for a second and then stops even tho vacuun still operating - how to fix?


... Dyson Dc34 Animal Handheld Vacuum With Longer Run Time For Pet Owners

Beater head makes loud noise on 'carpet' mode


Possibly a belt problem, but more than likely a brushroll problem.The bearings are cheap and nasty, and are prone to siezing.If you visit\012http://www.sparesaver.com/help-and-support/dyson-section/dyson-technical-advice-450/\012the ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Power head not working


There is a gray button next to the red "power on" button that powers the brush unit. If the unit has tripped the reset for some reason it must be reset. This can be done by holding the gray button down for ten seconds while the unit is not running. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson DC07 - broken 'Contact Head' release clip


Hi Wombat64\015\012\015\012We noticed you are having difficulties with your Dyson vacuum cleaner. We think we can help, simply call our Customer service team for free on 0800 298 0298 between 7am - 10pm, 7 days a week.\015\012 ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Electrolux z8220 - is it possible to get a power head for it?


... Electrolux Centralux Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0425 seconds