Having problems with your Vacuums ?

Is their maintenance I need to do on my H702 central Vacumn?


Answers :

H702 appears to be a Honeywell heavier duty for mid to large floor areas.I have not seen them but internally most Central vacs are VERY similar.
Most central vacs have an exposed filter which should be inspected periodically for damage or cleaning and replacement. A hanging cloth filter is normally fine for 7- 10 years with periodic inspection by the homeowner. Look for tears, never pick up wet stuff. very simple. You can clean a cloth filter prior to inspecting with the round brush from another vac or a soft paint brush.

I found internet reference to an H702 bag but it may be an option for your vac.
Some cv's have an additional or optional paper bag for allergy sufferers or removable cartridge filter which would be visible when removing the dust pail. regardless, the filter protects the motor from damage, periodically inspect when emptying. If dust gets through a damged filter it can leak into and blow a motor. As an cv ages a small degree of fine dust gets in no matter the brand, but most are fine for 10-12 years with no service.

If you see dust in the air exhausting or puffing from the vac, have the unit checked as this indicates dust which has run completely through the motor. If you see a small amount of black dust exhausting along your wall, it is normal from internal brush wear. Turn the vac on and off and listen to the motor as it winds down. If it growls or sounds scratchy or is squealing, that is an indication it needs to be serviced. Clean and inspect you pwer head every 4-6 months and change a smooth drive belt twice a year, broken or not as it will be stretched.
o
If this helps please post a response
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Is their maintenance I need to do on my H702 central Vacumn?


H702 appears to be a Honeywell heavier duty for mid to large floor areas.I have not seen them but internally most Central vacs are VERY similar. Most central vacs have an exposed filter which should be inspected periodically for damage or clean ... Vacuums

Need wiring diagram for kirby vacumn ultimate g series. wire is lose on back of unit that comes from the motor cord that is tye wrapped to the vacumn .[email protected]


... Kirby Ultimate G Bagged Upright Vacuum

I need an operational manual for a beam central vac model 178. It came with the house and I need to take it apart and clean it. Does the filter thing inside the system come off. It is caked in dust and dirt and I think it is effecting the performance of the vacuum.


... Vacuums

Need connector wires inside wand. Electrolux central vac. 16" wand 1 1/4" wand dia. Don't need wand, just the wires.


Go to a store like Lowe's and look in their electrical department. You need wire the same gauge size (stranded or solid) and comparable insulation. Hope this helps! ... Vacuums

I have an electrolux central vacuum in my house. My central vac hose has something stuck in it, I think, maybe a sock. I tried to put a long dryer wand down it but the hose is just too long. Does this need a repair man or new hose?? Any idea of a way to blow it out? Thanks.


The best way to clear an obstruction is to blow it out by attaching the wall end to the exhaust of a shop vacuum, or using an air compressor.\015\012You can try holding the wand end of the hose directly to the CV in port and turning the machine ... Electrolux Central Vacuum

Need a clean up and something is stuck and do not sow I did not use the machine for few years and really need some maintenance


Hi,I don't have your vacuum cleaner model or its brand to help you exactly.Please provide it.The below two sites will help you lot.Since i dont have exact information of the brand and model.I am just giving you an idea. ... Vacuums

Hi I need help because I have a problem with my Electrolux Centralux Central Vac system in my house. When I plug the vac hose in the central vac socket at first I heard the motor running very gently with NO suction then after a minute or so it went completely dead and they is NO motor sound, suction, or anything happening what so ever. Can anyone tell me what this problem is???


Have you checked for a clog in the lines or in the hose? If there is no clog in the system anywhere, then your motor could be dying. ... Electrolux Centralux Vacuum

Need a manual for ck 352 nutone central vac - Broan-NuTone CV352 Performance Central System Vacuum


... Broan-NuTone CV352 Performance Central System Vacuum

I need a new hose for my Electrolux central vac


You can check ebay, they have lots of electrolux central vac hoses and you can get one with the appropriate handle to attach to your power head and wands and other attachments. ... Electrolux Central Vacuum

Odd noise coming from central vacumn cleaner


The rattling noise, will likely increase when the head is flipped upside down. Generally means you have a stone caught in the belt or a blown or stripped tooth on the belt. If you gently squeeze the outside edges of the light housing it will p ... Hayden Industries SuperVac 2400 Central System Vacuum

Need to replace a switch on a d4c rainbow vacumn


... Rainbow Vacuums

Power head for my central vacuum powers on and need to be pushed


What brand system is it? by not moves do you mean it doesn't pull itself forward? chances are its a cheap rubber belt that is stretched out and needs to be a replaced. ... Electrolux Central Vacuum

I need a maintenance manual for a miele s5281 calisto vacuum


... Miele S5281 Callisto Bagged Canister Vacuum

Need a new top for a 16 oz stainless steel thermos vacumn bottle


... Copco Stainless Steel Thermos 16-Ounce Vacuum Bottle

Changed the motor carbon brushes on my Beam central vacuum cleaner equiped with an IntelliWatch system. This system includes the Alutron DB100 module. This Alutron module needs to be reset so that the vacuum cleaner can operate properly. I believe that this module keeps log of running time and disables operation after a predetermined time. Can you help me with providing a reset procedure that will reset this module. Thanks


... Sunbeam Vacuums

Need a manual for a beaumark central vac model # 97456


... Vacuums

The on/off switch on my kirby g-3 vacumn needs to be replaced I would like to know the best procedure.


Get the parts ... locally or at some place like Repairclinic.com then set aside a Saturday afternoon in a quiet place with screw driver, pliers and a box of band aids and go to it.\015\012\015\012Repairclinic.com will also provide you wit ... Kirby Generation 3 Bagged Upright Vacuum

Looking to replace my eureka Boss central vacuum, but need a new unit with both exhaust and suction connections on same side. I was looking to replace it with an Imperium CV7700.


I would recommend the AirVac AVR7500 model. It's a great unit. ... Eureka CV1801 Bagged Vacuum

I need a manual for this model vacumn so I can tell how to replace the belts.


A manual in downloadable .pdf format is available here:http://www.dirtdevil.com/search.aspx?q=M089900&type=3 ... Dirt Devil M089900 Upright Vacuum

Our vacum isn't picking up @ all.we did have some thread around the brushes, about an inch wide. it has an odor like it is getting hot. the vacumn is about 1-1/2 yrs old. we need help. thanks BETTY COX.


Hi, The most likely cause would be a blockage. If you remove vac hose, does it **** on your hand? secondly, with the vac unplugged, Can you turn the brush reasonably freely ? Is the drive belt on? ... Vacuums

I need a wiring diagram for a m&s central vac ntsp700a and can't find it anywhere.


... M&S Systems Vacuums

I have a modle # 1584 electrolux central vac no suction. This modle has a lid not a canister. Motor goes on. Need help


Likely is a leak somewhere. check all the outlet doors ... Electrolux Vacuums

I have a broan central vac system need belt for cv315-b vac head cant seem to find one any idea where i can get 1 thanks


I believe that the Broan replacement part number for the belt for the CV-315 power head is a 9967-0585. available through a Broan/Nutone dealer. ... Vacuums

I need to get a manual for my kirby heritage II vacumn cleaner


User guidelines will be very similar to newer models unless you need something very specific to your model which is not likely. HERE are some printed manuals as ... Kirby G4 Bagged Upright Vacuum

Can you replace the cloth bag in a beam central that is about 20 years old, the vacumn sends a dusty smell though the house


It is not recommended to change that bag. The best thing to do would be to borrow a shop vac from someone and vacuum it off really good. The bags sell for about $60.00 and they are a big pain to change out. The other thing you can do to help the o ... Beam Industries 2775 Serenity Plus Central System Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0482 seconds