Having problems with your Vacuums ?

Power nozzle works intermittently

\015 Brand new vacuum. power nozzle works intermittently. when you push forward works, pull back power nozzle stops working.\015

Answers :

The pin connection from the lower handle tube to the power nozzle are not making good contact. It is new, so i would have warranty service performed.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Power nozzle works intermittently

The pin connection from the lower handle tube to the power nozzle are not making good contact. It is new, so i would have warranty service performed. ... Vacuums

My electrolux Epic 6500 power nozzle Model N109J will not work. It had an intermittent short which I thought I fixed (some of the insulation on the wires were pinched). I fixed the wires and it worked intermittently for an hour then shut down completely. Could the reset switch have a short? When I press the switch nothing happens.

The switch is definitely a possibility, but other problems can also cause this.\015\012Bad switch, needs replaced.\015\012Broken wiring in power nozzle, wands, hose, or canister.\015\012Bad PN motor.\015\012\015\012I str ... Electrolux Epic 6500 Vacuum

My power nozzle has stopped working. The vacuum itself is still working but not the power bar. I would like to order a power nozzle. Can you tell me how I can order a nozzle for a Kenmore Whisper Belt 12.0 amps

... Kenmore 23313 Whispertone Bagged Canister Vacuum

I was vacuuming with the regular nozzle and all was well. Then I changed to the powered nozzle and the 2nd power level wouldn't work and then when I detached the powered nozzle I was unable to turn it ....there was no suction. The lights are on for low and high level but not middle level power.

... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

My Electrolux central vacuum power nozzzle was working hit/miss and now has stopped working. The metal connectors in the wand and power nozzle get very hot, enough to burn. The metal connectors also

... Electrolux Central Vacuum

Power nozzle of my S3670 does not work (vacuum itself does work), the headlight bulb in the nozzle is broken. This happened in the past several times - we would bring the vacuum to service center - I don't know what they did other than replacing the bulb. I decided to go to ACE and buy replacement bulb myself, replaced the one in the nozzle - this did not fix the problem. I don't see any fuzes or anything in the nozzle. However, the manuals says to "Use only HOOVER part no. 27317307, which is a

... Hoover S3670 Bagged Canister Vacuum

Electrolux Epic 6500 SR ...no power to power nozzle. I think it is the switch in the handle because if I use my friend's hose/handle (same model), my power nozzle works fine when I turn on the switch. If you think it is the switch, can I get a part for it?

That's about the best one to narrow down a problem, however, there could also be a break in your hose wiring. Switches, hoses, and hose handle assemblies are all available at your local Aerus Electrolux store. Simply take your entire machine in so ... Vacuums

Electrolux power nozzle not working


Power nozzle not working on my vac but does on another vac

If pushing the reset button doesn't help try having your local Aerus dealer check out the 2 prongs in the power head where it all connects. Sometimes they go bad. ... Electrolux UltraLux 2000 Bagged Canister Vacuum

The nozzle is blocked up i'm assuming with limescale. I've tried soaking it in descaler but it still won't work. The buggy is working but need the nozzle for any sort of power.

If you can not get the power nozzle to work then the best thing to do is take the nozzle to the local vacuum store(used) and they will tell you the best advice weather it be fix the old one or replace the head. You can pick ... Tristar SB Steam Buggy Vacuum

My electrolux epic 6500 power nozzle brush does not rotate. everything else works fine. do I need a new power nozzle/

No. If the power nozzle motor is running, then a new belt will do the trick. ... Electrolux Epic 6500 Vacuum

Power nozzle for rainbow vaccum is getting power but the motor does not work nozzle model r-2800c

Hi there it's SmartAlec from NelsonVacuums.com.au here. It will either be the fuse or the motor itself. If you disconnect the wires from the fuse and join them together and ... Vacuums

Power nozzle don't work

I don't know which model you have or how old it is, but most models have a cord on the hose that plugs into a receptacle on the main machine. Sometimes they can look like they're plugged in when in fact they're just barely hanging there. You could al ... Rainbow 75th Anniversary Canister Vacuum

Power nozzle has quit working

Most of these nozzles have a reset button on them. Standing behind the nozzle it is on the back, right side. ... Filter Queen Majestic Canister Vacuum

I have an electrolux canister 5000 lux - power nozzle not working

HAVE YOU TRIED PUSHING THE RED "RESET" BUTTON? ... Electrolux Guardian Bagged Canister Vacuum

Rainbow vacuum wet, power nozzle isn't working now was and just stopped

Does your version have a light on the power nozzle and if so, does it come on?RainVacwww.rainvac.com800-523-0510 ... Rainbow E series Canister Wet/Dry Vacuum

Miele power nozzle quits after 10 seconds of working.

Even though the brush is spinning, you probably need to replace the beltbecause it is st ... Miele Vacuums

Rainbow E Series Power Nozzle I'm not sure which part of it is not working?

<p>The power nozzle brush roll bearings could be locking up from hair and debris wrapped around them. If that is the case, then the brush roll will be hard to turn and will cause the belt to heat up and give a burning smell. If you need to spea ... Rainbow E series Canister Wet/Dry Vacuum

I have a hoover elite cyclonic cansiter vacuum the vacuum works fine but I can not get power to the power nozzle

If there is no suction in the hose it is clogged.Remove the hose at the bottom and clear and obstructions out.If this does not fix the issue please leave a comment and I will assist you further.Thanks ... Vacuums

Electrolux power nozzle quits working after just a few minutes of working. i've cleaned the head, but have to push the restart red button for it to go again for a few minutes

My guess is that hair, threads, and/or similar long fine fibers have gotten wrapped around the ends of the brush near where the bearings are. The PN may need to be disassembled to remove them. Be aware that if the vacuum is less than 5 years old, d ... Electrolux Guardian Bagged Canister Vacuum

Power nozzle suddenly stopped working (no power or vibrating). Can these be repaired or should I just buy a new one?

Hello. Check out your reset button located on the top of the power nozzle. It is either black or red. Turn the cleaner on, and while running, push in the reset. Voila! It should be working again. The reset is put in the vac to protect your power ... Electrolux UltraLux 2000 Bagged Canister Vacuum

Have a canister model Lux5500-ser#F35365B and power nozzle number N115Q-problem: The power nozzel does not stay completely connected to the hose-there seems to be some slipage where the hose connects to the nozzel-preventing a solid connection and the unit from working properly. I tried to tighten the connections on the nozzel, but this has not helped

... Electrolux Guardian Bagged Canister Vacuum

Same problems - power nozzle motor does not work after cleaning the brush and pressing the reset button. Also the handle button which turns on the nozzle does not light up (my wife thought it lit up before).

Hello,\015\012\015\012This is a pretty common problem on the Guardian, and it's usually caused by 1 of two things. Both are pretty simple fixes. The first thing you should try is simply eliminating the wand assemblies from the vacuum c ... Electrolux Guardian Bagged Canister Vacuum

I have been trying to register on line and can't get in. I am having problems with my WindTunnel powered nozzle it doesn't want to run and I just got this as a gift May 1st. The power hand tool works but not the other one and I know all the connectins are good

It will have a years warranty on it. Take it in to a warranty repair shop and tell them that yo got it as a gift and when. ... Vacuums

Power nozzle model #n137b of the electrolux lux5000 just stops working periodically when vacumming, now barely works at all

Make sure the brush is clear of all thread, string, hair, and similar material that has gotten wrapped around it.\015\012There could be a problem with one of the electrical connections from vacuum to power nozzle, including broken wire in the h ... Electrolux Lux 5500 Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0514 seconds