Having problems with your Vacuums ?

How to change the belt on an upright silencio


Answers :

Remove the 2 screws from the bottom...remove bottom cover.....pull the rotary brush straight down and out....put new belt in the groove on the brush then reinstall brush and put the belt around the metal rod thats inline with the groove on the rotary brush...put cover back on and put the 2 screews back in...thanks and have a great night
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to change the belt on an upright silencio


Remove the 2 screws from the bottom...remove bottom cover.....pull the rotary brush straight down and out....put new belt in the groove on the brush then reinstall brush and put the belt around the metal rod thats inline with the groove on the rotary ... Vacuums

Changeing belt I have a Eureka Upright Limited Edition Model 4462D and can not for the life of me find my manual and can not find the screws to take off the plate to change my belt.....help!!!!!


On the top nozzle, there will usually is 2 screws holding the top done. There are slots or holes on each side near the front and the screws or in these holes. Remove them, remove the top cover and then you can get to the brush roll and belt. ... Eureka 2991AVZ Bagless Upright Cyclonic Vacuum

Sudden loss of suction. Using a dirt devil upright. Checked the belts that were changed recently and working. Changed the half full bag. No change. Checked for blockages and as far as I can see there are none. The blower is working as much as it ever was I think but I;m stumped.


R u sure there is nothing cought in the hose? ... Dirt Devil Featherlite Bagged VacuumVacuum

Changeing belt how do you install a new belt? I have an Eureka, The Boss, bagless, upright. The brush is hardly rotating. I think it could be the belt but i cannot open the vacumm to check it. How can I fix this?


... Vacuums

Upright vacuum cleaner model dm4485 belt change assistance


... Hoover Vacuums

How do i change my Kenmore upright vacuum belt?


... Kenmore 33721 Upright Vacuum

Vacuum belt keeps coming off. Need instructions on how to change belt on Panasonic mc-6955 upright vacuum cleaner.


... Vacuums

Need to change belt on hoover upright model u5093-900, but can't figure out how to open it up to get at the belt.


... Hoover Vacuums

Belt location i have a eureka upright the boss whirlwind lite and i need to change the belt. I have no clue where to find it. Need help with this


If you torn the macine over, at the bottom of the sweeper you will see the belt on on side. You have to take the bottom part apart and remove the brushes to replace the belt. I hope this helps. ... Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum

I have a DC04 which is a number of years old and has started making an awful grinding sound, I'm sure it is the belt which I sprayed with WD40 and this helped for a couple of seconds but as soon as I recline the hoover it makes this noise but not when upright and using the hose. Does anyone have any ideas or how to change the belt? Thanks


You have to change the belt look it up with your local vacuum store. ... Vacuums

My question earlier today referred to a Kenmore Progressive upright vacuum. Your answer suggested that I change a belt, if the reset button did not work. Does a direct drive really have a belt? Regards, Jim Buckley


Direct drive does not have a belt. It is a shaft with gears. What is wrong with your vaccum? Maby i can help. ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Have a dyson dc07, the belt snapped on it, changed the belt & now the rollers are constantly turning in upright position... Any advise


... Vacuums

How to change belt on upright bissel style 9 filters and belts


Brushes wont spin ... Vacuums

I have an old upright hoover vacuum. I need to change the belt but can't figure out how to get to it. The bottom plate over the roller brush comes off but I can't get anything else off to get to the other end of the belt.


Model no. req ... Hoover Vacuums

Eureka 1931 bagged upright, I changed the belt but now the cover is rubbing against belt. How do I prevent this?


If your cover is rubbing, you probably put the belt on wrong. It should line up with the belt close to the groove in the underside of unit. ... Eureka 1934 Bagged Upright Vacuum

Oreck Upright Hi Redev, I'm not sure what model I have (about 6 years old...upright, looks like the one in the picture). I changed the belt (which was torn) and then the next time I used it, it cut off on me. Now if won't turn on at all. (I turn the switch on and off and nothing happens as if it is not plugged in but it is!). I noticed at the top where the power cord enters the handle, it is all frayed. Could the electrical wires have detached? Anything you think I should check before taking it


The cord could be bad and will ahve to be replaced. It would have to have a problem inside the handle or down by the motor. ... Oreck XL2600 Vacuum

How to change belt on old upright Hoover vacuum


... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Hoover upright model u5095-930 belt change


I couldn't find your specific model but this may be similiar to another that you have to position the new belt around the agitator (beater bar) on the bottom of the vacuum, replace the cover, and then turn the vac over and remove the TOP cover to lif ... Hoover Vacuums

How do you change the belt on an oreck upright xl ultra


... Oreck XL2200 Bagged Upright Vacuum

How to change the belt on hoover upright U3305-030 vacuum


... Hoover Vacuums

8955 Upright Vacuum: How to change belt?...


Be sure to unplug your vacuum from the electrical outlet before proceeding!\015\012\015\012-Turn your vacuum upside down so that the handle is resting on the floor and nozzle portion is resting on a work bench.\015\012-Remove the 2 ... Riccar 8955 Upright Vacuum

Changing the belt for #u4264-930 upright vacuum


... Hoover Vacuums

Change belt on hoover savvy bag and bagless upright vacuum


... Hoover U8155-900 Savvy Bagged Upright Vacuum

Belt change on savvy upright


Take off the bottom plate, also remove the screwsfrom the bottom to remove the top cover, also there is a screw under the Hoover emblem on the top cover, with these removed you can get to to brush roll and belt. ... Hoover U8171-900 / U8172-900 / U8173-900 / U8174-900 Savvy Bagless Upright Vacuum

Change belt nv22l sharp upright vacuum


... Sharp Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0487 seconds