Having problems with your Vacuums ?

I am looking for a new water pump for my H2O Mop.


Answers :

I took the pump apart and applied a small amount of silicone lubricant to the main o-ring. Bingo it now works lie new. It also saved me $65.00 which was the price of a new main body(what a ripoff).
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am looking for a new water pump for my H2O Mop.


I took the pump apart and applied a small amount of silicone lubricant to the main o-ring. Bingo it now works lie new. It also saved me $65.00 which was the price of a new main body(what a ripoff). ... Vacuums

HELP! My HAAN floor steam mop water pump went silent & dead! Heat element still heats, but the pump is inactive.


... Vacuums

I have an H2o steam mop the on off switch has stuck i have tried to sort it but will still not work iam now looking for a new switch !


... H20 Vacuums

My new H2O Mop Ultra (Danoz) seems to heat up ok then when the light switches to green and I start using it, the orange light comes back on as well as the green. Produces steam to start with but then it starts to spit water too and everything ends up wet. Any ideas on whats wrong or should I just send it back?


That is a major hardware fault, I have seen this numerous times with these H2O mop's... They seem to either work perfectly for a long while or have problems right off the bat. You definitely want to send this unit back and either get a refund or at ... Vacuums

Water pump does not wok - As Seen On TV Microfiber Replacement Pads for H2O Mop X5 Steam Mo


... As Seen On TV Microfiber Replacement Pads for H2O Mop X5 Steam Mo

My first proheat lasted four years so I bought a new one. After I used my Pro Heat for only the fourth time my first issue occured, the gear on the pump that runs the brushes came off, so I had the one from my old proheat, I just changed the gear spindle that is screwed to the pump and fixed that problem but now it will not pump water. That is why I bought a new proheat, I could not get the old one to pump even after a new pump and made sure all lines were not cloged.


Is your new machine a 2X or like the old style proheat? ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

WATER PUMP WHERE CAN I BUY A NEW WATER PUMP FOR MY BISSELL 7920


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

No spray My Bissell Pro Heat 7901 will not put out any spray. I Took the pump out so I could get at it and disconnected the hoses. I put the one on the input side and the other in a bottle of water. Put the belt on the pump and turned on the machine .Nothing at all coming out of the pump. Where can I get a new pump? Also the lever that goes to the little flapper at the top under the clear plastic piece on the front that connects to the knob that changes from tools to floor broke off. Where can I


Pump part number is 2107181, the diverter valve # 2136988. You can Bissell and they can tell you who may have parts near you, or you maybe able to order thru Bissell.com. Before you took it apart, were you getting water to spray out of the hose. I ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

No spray My Bissell Pro Heat 7901 will not put out any spray. I Took the pump out so I could get at it and disconnected the hoses. I put the one on the input side and the other in a bottle of water. Put the belt on the pump and turned on the machine .Nothing at all coming out of the pump. Where can I get a new pump? Also the lever that goes to the little flapper at the top under the clear plastic piece on the front that connects to the knob that changes from tools to floor broke off. Where can I


Search for bissell pro heat pump. bissell.com will not have it ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

We have bissell pro heat and I have put new belts on and took off the top plastic cover I blew out the lines and I still can't get it to pump water or solution. The red little spinner flow indicater does'nt get water, if I pour water into it it runs out the front. I guess I don't know what else to do. The machine worked fine the last time we used it about 6 months ago. Any suggesttions?


Did you check and make sure the belt is still on right? They do come off from time to time.There are like 6 long screws holding the top cover to the bottom. The are real pain in the behind to put back together once you take them off. T ... Bissell Vacuums

I have a hand held vaporettino steam cleaner ....the appliance is working but the water container has been dropped and has a hair line crack in the base and leaks the water from the crack ....I am looking to either buy a replacement water container or to buy a new S/Cleaner if you could let me know of a supplier either in the UK or Spain


... Polti Vacuums

Vax 6131 water pump had stopped working on taking apart it had over heated and plastic casing had melted in one place,obtained new pump from buy spares which matched old part fitted and reasembled but pump does not run ,is there any internal fuses ? Or any thing else to replace


... VAX Appliances Vacuums

I have a Thane h2o mop ultra, I added some bleach to the water tank to clean better, the unit worked for a while, enough to clean 1 room, then even if the tank is still full of water the steam is not


... Vacuums

Bissell proheat model# 8910-3. motor works good. Will not suck water up out of carpet. please give me an ideal on what to look for. pumps water out, will not suck up


... Vacuums

Vinegar Hello! I really love my new Shark Steam Mop. It is useful for cleaning my Pergo floors without streaking. Can I add some white vinegar to the water or will that damage the mechanism or clog something? I am using distilled water, by the way. Thanks- Denise


Do not add anything to the tank.... Vinegar is corrosive and that would potentially be very bad. ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

I have Bex Bissell Proheat. It is one problem requiring fixing each time I use it. Just had a new pump fitted as water not spraying out. Now the water is not being sucked up. For the money this has not been a good product. When it works it is good. But the constant issues each time it is used is frustrating.


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

I have a Tetratec IN600 Plus aquarium filter which does not seem to be pumping air bubbles through the water. I have checked inside and everything looks as if it should work. The pump system seems to be working as the filter is vibrating when on, but no bubbles! Please help!


... Tetra Vacuums

Machine will not pump out water. Brushes work, motor works, new belt, Just will not put out any water??? It is a Bissell Powersteamer,Clearview 4 row brush , dirtlifter.


IF you take the tank out of the base you will see a recepticle where the tank nipple fits into the base. There is a cross looking pattern in the recepticle. Take a pointy object and press down inside the cross area between the bars in the little pie ... Vacuums

I have a bissell powersteamer model 1697 that does spray water any more. Will a new water pump solve my problem?


Check all lines from being gloggged /also check screen in the water tank on hose can you here the pump working ... Bissell Vacuums

Pump in my beldray steam mop is broken want to get a new one


... Euro-Pro Vacuums

Cleaner not dispensing water. changed pump still no water


Please offer make and model number of your unit. In the meantime, is there any problem with the switch? ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

H2o mop leaks large amounts of water straight from the box


... H20 x 5 Mop

Bissell carpet cleaner proheat 9200 does not despense water...opened inside and found some tubes with fluid some without, what does the pump look like? i think it may be what is stopping the process.


Here's a link to a site that describes how to do some troubleshooting. Good luck!\015\012\015\012http://www.ehow.com/how_5 ... Bissell 9200 Upright Vacuum

My h2o steam mop doesn't produce any steam,I already remove the head and then I put vinegar and water solution in the tank 2x and it doesn't produce any steam....


... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0852 seconds