Having problems with your Vacuums ?

Hoover floor mate

\015 Solution will not come out of my hoover floor mate\015

Answers :

When you place the clean water tank on the machine, there is a connection between the tank valve and the seal on the body of the unit. If you have been using the wrong solution, ie. lysol or pine sol, they contain elements that will cause the seals to absorb the solution and they will swell and the valve will not open to release the solution into the machine. If this is the case, you will have to replace the main seal on the machine and the small seal on the valve in the tank. I have seen this problem alot because it can be hard to find the proper solution that was designed for the machine.
\015\012Put cold water only in the tank and place it on the machine. As you are pushing it into place, look through the clear plastic of the tank and observe the valve. You should see it lift slightly and hear the "glug" of water flowing. You should also see bubbles rise up inside the tank. If this doesn' happen, then the seal and valve are probably compromised and will have to be replaced. Don't use any solutions or additives that contain petroleum distolates or solvent bases as these are the main culprits that will be absorbed and distort the seals.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Why won't our Hoover Floor mate deliver water for cleaning?


After reading postings I created my own solution. I took a 1.5cm (approximate length) flush head finishing screw and screwed it into the button contact of the white memebrane and adjusted it to the necessary heigth to make the rod depress at the corr ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Hoover floor mate


When you place the clean water tank on the machine, there is a connection between the tank valve and the seal on the body of the unit. If you have been using the wrong solution, ie. lysol or pine sol, they contain elements that will cause the seals ... Vacuums

My Hoover floor mate will not spray - Hoover Vacuums


... Hoover Vacuums

I just bought a hoover floor mate for hard floors. The problem is the water with cleaner is not coming down to the brissles at all. Help please. It is brand new. any ideas???


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=40471&thid=603805\015\012I just bought a Hoover\015\012Posted by serdmann4 on May 17, 2008\015\012I just bought a ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

I have a Hoover Floor Mate and need to purchase a floor cleaner to use in the machine. What do you reccomend?


Yhis is the cleaner I would use on link below. The reason why I would use it is because it covers all types of flooring.\015\012\015\012 ... Vacuums

I need aanual for hoover floor mate - Hoover Vacuums


You don't specify the model, but it should be listed and available on the following site.\015\012http://www.hoover.com/CustomerService/Manuals/ ... Hoover Vacuums

I have a hoover floor mate(the hard floor cleaner). The plastic solution cannister leaks through a spring plunger.


There is a rubber bushing that should be in there also. But replacing your tank may be the best option. ... Vacuums

Hoover floor mate sucks up water while in the wash position


They do that. They pickup the water in all stages but lower the squeegee to different heights. At no point does the suction turn off. ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

HOOVER FLOOR MATE WILL NOT SUCTION WATER


The squeegee needs to be replaced. Mine made a horrible noise, which I found I could fix by trimming the worn edge of the squeegee. This, of course, reduced the suction. I found a replacement part on Ebay, but you can also find them on Hoover.com ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Cleaning Solution What cleaning solution do I use in the Hoover Floor Mate?


The solution is called "floor to floor" sold in a white 48oz bottle ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Hoover floor mate is not sucking up water, why?


First make sure that you are getting suction from the bottom of the \015\012machine. Most of the time the squeegee is worn out which does not allow \015\012it to pick up the water like it use to. Turn over the machine and \015\012inspect \015\012th ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

I need an illistrtion book for my hoover floor mate H3044 series AM6.1 I was wondering if I could print one off my comp. my e-mail add. is [email protected]


I need an instruction manual for Model U5264-900, Series AG 12.0 ... Hoover Vacuums

I don't know how to use my Hoover Floor Mate scrubber.


You can download a new manual at www.hoover.com\015\012You just type your model number in and it should pull up the manual for downloading.\015\012If you need parts you c ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

How do you replace the squeegee on the hoover floor mate?


... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Hoover floor mate stopped picking up the water


The Tank recovery hose is very easy to remove. With the tank off, there are two screws holding the flat plastic piece that is attached to the hose. A few clips are on each side which just needs to be squeezed together to get loose. The hose unscre ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Our Hoover floor mate won't **** up the water. Motor runs but pick up is limited.


You will need to replace the squeege that is located on the nozzle. 3 screws will take it off. you can get this at a vac shop or order it from the company, filter may also need to be changed ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Floor Mate Need to find REPAIR, not owners manual for hoover floormate spinscrub 810 for disassembly instructions


There is a black shaft with a black circular arm at a right angle to the shaft. The black plastic arm that sticks out of the front ( farthest away from the hinge) of the roller assembly plugs into the circular arm so that moving the scrub/vacuum slid ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Hoover floor mate wet/dry - brushes do not spin


Hey there bankshots, if you look at the bottom of the head of the vacuum, you should be able to see the brushes. Their are some screws to remove to gain access to the inside of the bottom panel. When opened, you should be able to see the entire spinn ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Hoover floor mate/ wet/dry I added the water and turned on and no water is coming out? What did I do wrong, I dont have a manuel


I have had the same problem. I took the darn thing apart to see if the hose was loose. Come to find out that when you fold the handle there is an extension that sticks out. This extension pushes down on a plunger that allows the water to squirt out ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Hoover floor mate 500


If you mean the footswitch that shifts from wet to dry, trun the machine over with the brush assembly removed. There is a black rectangular oush button on the left side. This is the wet/dry switch. Make sure it is in contact with the white post to t ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Users Guide Does anyone know where i can find a copy of the users guide for the hoover floor mate? I cant find mine anywhere...thanks


Go to: http://www.hoover.com/pdfs/manuals/H3030.pdf ... Hoover H3030 FloorMate SpinScrub 500 Upright Wet/Dry Vacuum

Floor mate I have a floor mate and it will not put water onto the floor


There is a little post in the back where you insert the top solution/water tank, if you put the tank in incorrectly, (i.e., shoved it in, instead of putting it in at an angle, bottom first) there is a chance you broke it or bent it backwards. My mot ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

I used my Hoover FloorMate, SpinScrub Hard Floor Cleaner for the first time today. My intent was to clean the grout in my kitchen/family room floor. Since the water was dirty I know it cleaned the grout but I was only so-so pleased with the results. Any hints? What about the grout solution? Do you mean I can only use the Hoover product?


The Hoover model 800 has seperate brush assembly to do grout. The 500 model (yours) has only the one hight brushes so other means must be taken to do grout. I have a 500 and all tile floors and I'm bumbed too.\015\012\015\012Kirk Thompson ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

I don't know how to use my hoover steam vac on carpets, hard wood floor, my (tile floor), my upholstery. I'm spraying and yet I don't see no suctions on neither of them. do you have a how to do step by step video that I can use in order to get the maximum result from my hoover steam vac.


Here is a link to the User Manual, in case that will hekp:\015\012\015\012http://www.hoover.com/pdfs/manuals/F5914900.pdf ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hetty hoover not working. It was working ok until I opened it up to search the bag for a missing jigsaw piece and I put it all back and I hoovered the mess on the floor, then switched off and switched on and hoover would not work? Is there a cut off button on Hetty hoovers?


Know cut off switch, its just not getting power ? 2 things its ether at the wall plug or in side the unit. I have never found a fuse in side them , so it may be just a lose wire did you try other plugs in the house . good luck DFD ... Henry Numatic "" Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0554 seconds