Having problems with your Vacuums ?

Hoover floormate spin scrub 500, model H3030 wil not vacuum wet or dry


Answers :

Hi You can down load your manual here.. you just have to wait and watch the prompts that you might have to enter a random
\015\012 generated script code and the word HUMAN ]]
\015\012
\015\012http://www.retrevo.com/support/Hoover-H3030-Vacuums-manual/id/8231ag818/t/2/
\015\012
\015\012Low suction
\015\012
\015\0123 Empty the recovery tank; it may be full
\015\012and the automatic shut-off engaged.
\015\0123 Make sure filter and filter lid are properly
\015\012positioned.
\015\0123 Make sure tanks are locked in place.
\015\0123 Check the filter and clean if dirty.
\015\0123 Make sure nozzle is replaced properly
\015\012and locked.
\015\012
\015\012
\015\012Won’t pick up dirty solution
\015\0123 Check Mode selector dial to ensure it is
\015\012set for WET PICKUP.
\015\0123 Make sure recovery tank is installed
\015\012properly.
\015\0123 Empty recovery tank.
\015\0123 Make sure filter and filter lid are properly
\015\012positioned.
Have you checked the belt is still engaging the motor and vacuum pump?

Thanks

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hoover floormate spin scrub 500, model H3030 wil not vacuum wet or dry


Hi You can down load your manual here.. you just have to wait and watch the prompts that you might have to enter a random\015\012 generated script code and the word HUMAN ]]\015\012\015\012 ... Vacuums

The wet pickup and the dry pickup switch on my Hoover Floormate have stopped working. Only the scrub cycle works. Needless to say, it will not pick up wet or dry. Can you tell me what the problem may be and how to repair it?


... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Where can I buy a scunci home cordless wet-dry vacuum battery for model 52069?


... Vacuums

Oreck xl wet dry vacuum model wd69 manual - Oreck Vacuums


... Oreck Vacuums

Hoover floormate Hi, I'm not sure what the model number is on my Hoover Floormate, but I can't get the cleaning liquid to dispense. The vacuum(dry pickup works fine). The handle squeezes without a problem. It used to work without a problem and then I didn't use it for awhile. When I came back to it, it wasn't working. Thanks, Alissa


The tank sits on what is called the reservior asm. it is actuated by the control rod inside the handle. With the tank off, watch and see if you can see that rod hitting the reservior asm when you squeeze the trigger. If it is moving up and down on ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Can't get any water to come out of vacuum neither rinse or scrub. Acts like its stopped up. Model#F7220-900 Hoover spin scrub


Did you ever put water into the 2 holding tanks? Read the owner's manual! If you don't have one go to the Hoover website and put in your model number and download the pages! IT's all there. If you have been using it and it worked, yes, you have a c ... Vacuums

No water comes out to scrub - Hoover H3030 FloorMate SpinScrub 500 Upright Wet/Dry Vacuum


... Hoover H3030 FloorMate SpinScrub 500 Upright Wet/Dry Vacuum

Wet dry vacuum cleaner WERTHEIM model SEM 1200


... Vacuums

The suction on my Hoover Spin Scrub 50 is suddenly not working. This is the 2nd or 3rd time I've used it and until now it has done a great job. But now it leaves my carpets soaking wet with no hope of drying and no dirty water is being suctioned into the dirty water tank. Help!


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I do not have my users manual and have never vacuumed wet with this vacuum. How do I change it from a dry to wet vacuum. Can't find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what lost my user manual never used it to pick up water. need to know how to puit it in wet mode i want to clean the dirty water out of my pool.


\015\012Vacuuming Liquids\015\0121. When picking up small amounts of liquid\015\012the filter may be left in place.\015\0122. When picking up large amounts of liquid\015\012we recommend that the filter be\015\012r ... Craftsman 17765 Canister Wet/Dry Vacuum

I have a stanley wet and dry vacuum 5.0 hp and 8 gallon should I have to take out the filter to use the wet vacuum


... Vacuums

I do not have my users manual and have never vacuumed wet with this vacuum. How do I change it from a dry to wet vacuum. Can't find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what


No - simply remove the filter. That is the only step necessary!!\015\012\015\012Hope your cleanup goes well!!\015\012\015\012Thanks for using FixYa - a FixYa rating is appreciated!! ... Craftsman 17761 Wet/Dry Vacuum

My Hoover steam vac spin scrub model 4060-900 brushes are not spinning and I have lost the manual. Any ideas. Thanks. [email protected]


The problem I found with one a neighbor was tossing out is the bearings in the part that drives the brushes were stuck. Lubing them up solved the problem, but took a bit of work to get into. This also provides a good chance to clean the crud out of ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have a Eureka The Boss Mini (Model # 442) vacuum cleaner. It is not working properly sometimes Today I did a cleaned the roller brush thoroughly and powered it on to see if it spins at all. It spins only in Carpet model, but stops sometimes. Please can you tell me what could be the problem?


... Electrolux Vacuums

I borrowed a Shop Vac Ultra plus wet dry vacuum to use as a dry vacuum. It needs emptying. How do I open it, and clean the filter? Thanks


WHEN IT FULL U WILL KNOW WHEN IT CAN **** UP ANY THING CLEAN ALEAST EVERY TWO WEEK ... Vacuums

Hoover Model# U8185-900 Problem: No suction, not engaging Vacuum cleaner roller spins as usual, but there's no suction when trying to vacuum the carpet. Can anyone point me in the right direction? Tha


... Hoover U8185-900 Upright Vacuum

I have a problem with my model 6585-3 bissell upright powerforce bagless turbo with turbo brush vacuum The brush has quit spinning upon removal i noticed that one side of the brush was free to spin the other side that has the rectangular piece to help hold into place seems to be locked up and will not spin is it corroded or have i lost a piece that joins with it that allows it to spin freely belts are good and motor is turning brush will not budge


... Vacuums

Hoover Bagless Hello,      My Hoover bag less (Model U5280-900) is not picking up dirt like it should.  The brush roll is spinning fine, but the bristles on it are only about one quarter inch long.  I am wondering how long they should be.  The vacuum is quite a few years old.  Do you think it is time to replace the brush roll.  Could you email me at [email protected] about this topic.  The product bar below did not contain my model no.  The correct model no. is above in my message.  Thanks


If the belt is more than six months old then change it even if it is not broken. then replace your filters if that doesnt work than check the hoses for a clog drop a marble down them and make sure it comes out. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

MY WIFE BOUGHT THIS FOR ME FOR FATHERS DAY GIFT ABOUT ALMOST 2 YEARS NOW OR SO,BUT I HAVE THIS PROBLEM THAT THE BRUSH DOS'NT SPIN ANYMORE EVERYTIME I PUT THE SWITCH ON FOR BRUSH ON,THE HOSES BRUSH SPIN IS WORKING BUT FOR THE FLOOR CARPET BRUSH SPIN IS NOT WORKING,AND THIS IS THE MODEL NUMBER OF MY HOOVER VACUUM CARPET SHAMPOO CLEANER IT'S F7411-900


This unit uses a turbine assy to turn the brushes. The brushes could have something jamming them. Remove the brush unit, it is held on 2 spring hooks 1 on each side. The brush unit is driven thru a 1/4" square post, only one brush is driven and it dr ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

I have a Craftsman wet dry vac with blower capability (22 L). While I was using it to **** up water, the water came out of the blower hose. Now I can't get it to work as a vacuum. What can I do to fix this problem? Is there a toggle switch somewhere that allows me to choose vacuum or blower? Also, will the vacuum still work without the filter nut attached to the plate? Please let me know at your earliest convenience. Thank you.


... Craftsman Vacuums

My Shop Vac (Brand) Mdl#934-16-11 keeps shutting off while I'm dry vacuuming. I can turn it back on then it will shut off again. The filter is spotless, so that's not the issue. There isn't any reset buttons. The only thing I can think of is that the float for wet vacuuming is somehow being sucked up causing the the motor to be tripped off. The vacuum is only about a year and a half old and used only sparingly. Help!


... Vacuums

Simplicity vacuum My vacuum just cut off and now it wont start. I pressed there restart button but nothing happens I have 2 fairly old Industrial hitachi dry vacuum in my workshop both 110v and both wont start. Both i was told were manufactured in Italy and both have a manual and auto switch. It has a black top, takes an orange paper filter inside and its bin is dark blue. Sorry i've forgotton the model number. I've inspected the wiring but it's fine, could it be the motor and how do i gain acc


Just take it in to your vacuum store. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

My electrolux 1800watt wet and dry vacuum cleaners


... Electrolux Vacuums

My model f2220900 Hoover spin scrub cleaner


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Change shop Vac Model LM500 from dry to wet pick


To change from dry to wet, remove the paper filter and install ball float if not already attatched ... Shop Vac 925-13 Canister Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1102 seconds