Having problems with your Vacuums ?

My bissel bagless vacume is not sucking - Vacuums


Answers :

Hello,

This is a fairly common problem with the Bissell bagless vacuums unfortunately. Bissell uses a series of filters throughout their machines, and if you haven't washed this filters recently, this may be the cause of the lack of suction.

If you'd like, please just reply to this repair with the exact model of your Bissell. This model number can be found on the bottom or the back of your vacuum cleaner on a sticker that also contains the serial number. This information will help me identify where exactly your filters are located.

Most Bissell's have a hidden filter inside of a trap door that most people aren't even aware of. First check to see if your model has a filter located directly under the bagless dirt cup. It's usually in a black colored tray that says "PULL". Slide this tray out, and check the filter that's in there. If it's all dirty and caked on with dirt, then this is probably your problem. This foam filter can actually be washed, just rinse it under the sink, but make sure it's completely 100% air dried before putting back in your vacuum.

If your model doesn't have a filter here, then you may also have a filter above the dirt cup. When you remove the dirt cup, look directly above the dirt cup in the clear plastic part that stays on the vacuum. There should be a circular shaped plastic part in the top part, Simply turn the plastic part to left while pulling downwards, and this filter should pull out. This filter is also washable, just make sure that it's dry before using the vacuum again.

Again, if you'd like to give me your exact model number, I'd be more then happy to better diagnosis the vacuum cleaners suction loss for you. Please just use the clarification request here on Fixya.

If this was helpful to you, please be so kind and rate my answer as helpful by clicking on the thumbs up icons in the top right hand corner of the repair. Thank you very much, this is greatly appreciated. If this wasn't helpful, rather then rating it unhelpful, please let me know more detailed information, and I'd be more then happy to walk you through the repair.

Chris J.
GoVacuum.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My bissel bagless vacume is not sucking - Vacuums


Hello,This is a fairly common problem with the Bissell bagless vacuums unfortunately. Bissell uses a series of filters throughout their machines, and if you haven't washed this filters recently, this may be the cause of the lack of suct ... Vacuums

I have bissell powerforce turbo bagless upright vacuum. Its a great machine. It is clogged though. I think I was not emptying the dirt collection tray thing enough. How can I unclog it. Its not sucking up like it should. It sucks up most stuff, but its not going into the bagless tray thing like it should


Remove the hose , clear that , then if you take a wire hanger apart you can pull whatever is remaining out of that connection, also remember to clean ( if you have the cleanable filter) the filter and also the top one ... Bissell Vacuums

My Bissell will not suck up pet hair or dirt - Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum


... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

Erueka vacuum not sucking - Bissell 6594 PowerForce Bagless Upright Vacuum


Check for a blockage in the unit and check the air filter is not blocked, this is a place to start. ... Bissell 6594 PowerForce Bagless Upright Vacuum

Fantom vacuum not sucking - Fantom Vacums FM740 Twister 300SE Bagless Upright Vacuum


... Fantom Vacums FM740 Twister 300SE Bagless Upright Vacuum

Vacum wont power on - Bissell PowerForce Helix Bagless Upright Vacuum, Gray/Blue, 12B1


Hey Troy, sorry to hear about the no power. Here's a quick link to troubleshooting steps to assist you.\015\012http://www.bissell.com/FAQDetail.aspx?id=145 ... Bissell PowerForce Helix Bagless Upright Vacuum, Gray/Blue, 12B1

Bad smell inside baggless vacume? - Bissell 6594 PowerForce Bagless Upright Vacuum


Turn it on, and spray some bathroom spray in the hose. if it still smells, spray some on the filters. ... Bissell 6594 PowerForce Bagless Upright Vacuum

Don't sucks ditrs - Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum


Is the brush turning?\015\012\015\012If not, replace the belt, check the brush roll make sure the ends turn freely. Other wise, are the filters clean? The hose and/or the dirt inlet by the brush roll may be clogged. ... Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum

Bissell powerforce bagless upright vacuum 6594-w


Be sure when you put the dirtant dust container in place that it is in properly. I have had this and believe it or not this container has enough room to fit without it seating properly. Take the dust container out and reseat it making sure the botto ... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell bagless upright parts near me - Bissell 3576 CleanView II Bagless Upright Vacuum


... Bissell 3576 CleanView II Bagless Upright Vacuum

Recall bissell power force bagless - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell 82H1 vacuum brush won't work - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

How to change belt on Bissell 6582 vacuum - Bissell 6594 PowerForce Bagless Upright Vacuum


Here is a link to the belts you need and to a manual you can view with instructions.Bissell PowerForce Belts and ManualHope it helps ... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell 82H1 vacuum brush won't turn - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

Bissell 3537 vacuum not sucking - Bissell Vacuums


... Bissell Vacuums

Bissel vacuum will not turn on - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

My Bissell vacuum cleaner won't turn on. - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

My Vacuum DC-17 has just quit sucking. It has been making quite a racket since I had the belt changed at a repair shop several months ago. I was told that the belt was a new design and figured that was why it was making so much noise. it seemed to work fine, was picking up dirt and all, but today, when I started vacumming, I noticed it was not sucking air either with the belt engaged or not. My vacuum is approx. 5 years old.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Pelacing hoover bagless nano vacuum belt - Bissell 3576 CleanView II Bagless Upright Vacuum


... Bissell 3576 CleanView II Bagless Upright Vacuum

I've lost my manual for the bissell momentum - Bissell Vacuum - Momentum Cyclonic 1 ea Bagless Upright Vacuum


BISSELL User's Guides can be downloaded at www.bissell.com\012On the front page under Customer Service click on User's Guides and enter the model number of your unit.\012User Guide will be displayed as a PDF file. ... Bissell Vacuum - Momentum Cyclonic 1 ea Bagless Upright Vacuum

Bissell vacuum making loud noise - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell Powerforce Bagless Vacuum


Either your hose is plugged, or the inlet by the brush roll is plugged. Another problem that can cause this is the the filters are clogged or may just need to be replaced. Most of these has a filter in the dust catch bucket, and also above the buck ... Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum

Bissell powerforce bagless upright vacuum 6582


Check your filter. Sounds like it is not receiving enough suction to pull up the debris. If your filters are clean and there are no clogs, disconnect hose from back by the tank and see if you have suction straight out of the whole. ... Bissell Vacuums

Bissell 37604 Bagless Upright Vacuum. Hose keeps clogging every time I vacuum. Is there a way to prevent this? I am ready to buy a new vacuum, but it does do a great job picking up hair...until it clogs. It clogs at top of hose. Could the hose be kinked? It does not look like it.


That is a defect in the design of that style of vacuum. I went back to my old vac because I got so tired of having to unstop it. The sharp turns in the hose and the molded plastic causes it. Find one without the turns. ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

I have a bissell powerforce bagless vacuum. My


Its probably is the roller brush causing the noise. ... Bissell 6594 PowerForce Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0831 seconds