Having problems with your Vacuums ?

Electrolux power nozzle, model 1692, power cuts on and off

\015 Electrolux power nozzle model 1692 power cuts on and off. I don't have the manual for it but I'm trying to remove and clean the brush compartment. I removed the top but not sure how to get to the brush. I would like to find a manual for it because it's completely different than the one I use to have.\015

Answers :

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Electrolux power nozzle, model 1692, power cuts on and off

... Vacuums

Electrolux power nozzle, model 1692, power cuts on and off. I don't have the manual for it, but I'm trying to remove and clean the brush compartment. I removed the top, but not sure how to get to the brush. I would like to find a manual for it, because it's completely different than the one I use to have.

... Electrolux Vacuums

Electrolux Epic 6500 SR ...no power to power nozzle. I think it is the switch in the handle because if I use my friend's hose/handle (same model), my power nozzle works fine when I turn on the switch. If you think it is the switch, can I get a part for it?

That's about the best one to narrow down a problem, however, there could also be a break in your hose wiring. Switches, hoses, and hose handle assemblies are all available at your local Aerus Electrolux store. Simply take your entire machine in so ... Vacuums

Power Nozzle Model No. N137A (for Electrolux Epic Serial 6500 SR) has a broken wire. Can I get a replacement power nozzle or find a repair place in the Everett, Washington vicinity?

... Electrolux Epic 6500 Vacuum

Need a new electrolux power nozzle model N106m

If you're looking for a new head for your vacuum. Then you're going to have to replace it with the same type of nozzle.However, wall inlets are standard so you can purchase any kind of ... Electrolux Centralux Vacuum

Power nozzle model N109J for Electrolux Epic 6500 vacuum cleaner

... Electrolux Vacuums

How do I change/replace my Electrolux Hose? I own a Metal tank Electrolux Can vaccum with an Electric Power Nozzle- model Olympia One,

... Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne

Vacuum, power nozzle model 1622, electrolux - Electrolux Vacuums

... Electrolux Vacuums

The power nozzle on my c141b model aerus electrolux canister vaccum no longer turns on. It was working when a large stringy object was sucked in. When hitting the red reset button, nothing happens. Is it likely that it is the fuse that needs to be replaced? All wires appear intact (I replaced the elbow assembly a few months ago.), and the sweeper moves freely.

It's not a fuse.\015\012Turn the power nozzle on it's top. Try to rotate the brush. If it won't spin, there's till something holding it. Remove all strings, threads, and whatnot from the roller. Try to rotate it again. If it still won't sp ... Vacuums

How to relace the motor in the electrolux power nozzle model n106a

... Electrolux Vacuums

Electrolux silverado deluxe power nozzle runs and cuts out

... Vacuums

Power nozzle model #n137b of the electrolux lux5000 just stops working periodically when vacumming, now barely works at all

Make sure the brush is clear of all thread, string, hair, and similar material that has gotten wrapped around it.\015\012There could be a problem with one of the electrical connections from vacuum to power nozzle, including broken wire in the h ... Electrolux Lux 5500 Canister Vacuum

My electrolux Epic 6500 power nozzle Model N109J will not work. It had an intermittent short which I thought I fixed (some of the insulation on the wires were pinched). I fixed the wires and it worked intermittently for an hour then shut down completely. Could the reset switch have a short? When I press the switch nothing happens.

The switch is definitely a possibility, but other problems can also cause this.\015\012Bad switch, needs replaced.\015\012Broken wiring in power nozzle, wands, hose, or canister.\015\012Bad PN motor.\015\012\015\012I str ... Electrolux Epic 6500 Vacuum

Replacing the belt on electrolux power nozzle model 1622

... Vacuums

I need a new base plate for an Electrolux vacuum power nozzle model #1693 Are these available anywhere?

This part is not available through any vacuum parts house / vacuum store. You would have to check your yellow pages to see if there is a local Electrolux dealer in your area. You might also try to find Electrolux on line and contact them that way. ... Electrolux Guardian Bagged Canister Vacuum

Electrolux Power nozzle model 1725 not working

... Electrolux Guardian Bagged Canister Vacuum

Looking for new belt for my electrolux guardian canister vacuum power nozzle marked model n106m . have been unasble to locate an appropriate belt replacement. Any suggestions?

This company is now known as Aerus. If you can't find their listing in the local yellow pages, follow the instructions on the folloing site.\015\012\015\012 ... Electrolux Guardian Bagged Canister Vacuum

My Electrolux central vacuum power nozzzle was working hit/miss and now has stopped working. The metal connectors in the wand and power nozzle get very hot, enough to burn. The metal connectors also

... Electrolux Central Vacuum

I need a new power cord for the power nozzle on my Electrolux 2100 canister vacuum. The power nozzle has part number N115M written on the bottom. I have found the power cord for power nozzles PN6 and PN7 online, and it looks identical in photos but I'm not sure if it's the right part.

You can buy the hose at an authorized Aerus Electrolux store. If near enough, they will deliver, if too far, they can ship it. The nearest dealer can be found using the below link. Just follow the instructions.\015\012Just provide the model ... Electrolux UltraLux 2000 Bagged Canister Vacuum

Power nozzle for rainbow vaccum is getting power but the motor does not work nozzle model r-2800c

Hi there it's SmartAlec from NelsonVacuums.com.au here. It will either be the fuse or the motor itself. If you disconnect the wires from the fuse and join them together and ... Vacuums

Older canister model 1521 with PN6a power nozzle. movers broke power nozzle elbow and lower sheath. what part numbers should we order?

Hi. With electrolux its best to take the parts to a vacuum or electrolux store and match it up. Chris ... Electrolux Vacuums

Power nozzle omni-flo plugged - goes into 1990 electrolux H684350. How do I get power nozzle cover off>

... Electrolux Vacuums

My electrolux epic 6500 power nozzle brush does not rotate. everything else works fine. do I need a new power nozzle/

No. If the power nozzle motor is running, then a new belt will do the trick. ... Electrolux Epic 6500 Vacuum

When I vacuum with the power nozzle, it keeps cutting off. Do I need to replace the hose or the power nozzle?

Not necessarily. It's hard to tell without checking it out. I strongly recommend taking it to an authorized Aerus Electrolux store and letting the service tech check it.\015\012If you have the "Sidekick", you can try using it. If it still cu ... Electrolux Epic 6500 Vacuum

Electrolux power nozzle not working

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0799 seconds