Having problems with your Vacuums ?
Replace mains cable panasonic MC-e 468
\015 Have removed the screw at rear as suggested, but handle will not move at all, let alone come off. Is there anything else I should do?\015
No. Once you've removed the screw, the handle just slides off - either backwards or forwards (sorry I don't remember which, but it's obvious when you've got the machine in front of you).
Repair Help & Product Troubleshooting for Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Replace mains cable panasonic MC-e 468
No. Once you've removed the screw, the handle just slides off - either backwards or forwards (sorry I don't remember which, but it's obvious when you've got the machine in front of you). ... Vacuums
Oreck Orbiter Hi Could you e-mail me a wiring diagram for the Oreck Orbiter please? I need to replace the mains cable & the cable to the motor. Thank you, Helen Eccott.
Http://geeksquad.fixya.com/ThreadView.aspx?prdid=618779&thid=681757\015\012Oreck Orbiter\015\012Posted by eccott on Jun 18, 2008\015\012Hi could you e-mail me a w ... Oreck Orbiter Floor Machines ORB-500, ORB-550, ORB-600 Vacuum
Dyson dc03 faulty cable The cable from the mains plug to the on/off switch has split and needs to be replaced. How do I gain acess to the switch ? I am a competent engineer but I do not wish to damage the switch/cover to repair/replace acble.
I've never worked on a DC3, but whilst the shape and position of the switches changes from model to model, most are secured the same way.\015\012\015\012If you look closely at the switch cover (the bit you press for on/off), there is usua ... Vacuums
Panasonic MC E468 vacuum cleaner power cable replacement
Trying to replace the mains cable on uproght cleaner mc e468,but having great trouble getting the plastic covers off
First remove handle \015\012single screw rear of cleaner and slide handle horizontally rearwards\015\012remove access cover (2 screws) for electrical connections and switch ... Panasonic Vacuums
How do I replace the mains cable on a DC-08? - Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
Hi there,Unfortunately, we can't supply instructions on how to replace the mains cable. If you feel the cable needs to be replaced, I'd encourage you to get in touch with us directly to discuss this further. You can call us free on 080029 ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
Replacing main's cord on upright 1600 W panasonic vacuum cleaner. Disassembling the body?
Take out all visable screws where you see the wire ... Panasonic Vacuums
How do you get into the switch area of the Dyson DC07 to replace the mains cable?
Mains cable on dc07
Generally no unless you're a certified electrician. It would involve taking apart the bottom section of the Dyson or wherever the cord leads to, and splicing the cable out of the connection end when you open up the Dyson. Easiest solution is really t ... Dyson DC07 Bagless Upright Cyclonic Vacuum
Hoover Wind Tunnel U6458-900 Self Propel doesn't work - via other expert advice here for other models of Hoover - I'm thinking it is the actuator that needs to be replaced as I can see the cable does not connect to anything on the bottom. My problem is - I can't get the cover off. Been trying for a couple of hours. I removed every screw I can seem to find but something is hold it down. I also am wondering if/when I do eventually get the cover off, would I need to replace the cable when I replac
On some models there are hook/springs that hold the cover of the base snug. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
How do I change the main cable to DC04 MAINS
Have a look at this link:\015\012\015\012http://www.dysonmedic.com/DC04%20Folder/DC04%20Cable.html ... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum
I have a 5 yr old Ariens snowblower ( model # 924124). I am having a problem with the deflector cable freezing. I had the deflector cable replaced a yr or 2 ago. I took the cable off and brought it in the house to thaw. When I reinstalled the cable, it worked ine except the shute does not operate in its full range of motion. I have the cable EXACTLY in its original position and routing. The shute only closes about half way. I cannot get the shute to close any lower. Any suggestions?
HOW DO I CHANGE THE MAINS POWER CABLE ON A DYSON DC07? my wife cought the cable under the dyson and has stripped it to bare wires so i need to change the cable. i have taken a cover off near where the cable goes into the machine but now cannot get any further
How to open the cover near the cable for dyson upright vacuum ... Dyson DC07 Bagless Upright Cyclonic Vacuum
How to open main case on a dc08. i have removed the two screws under the top filter but i can not figure out how to seperate the main case so i can replace main switch. any help would be much appreciated
... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
Dyson DC05 Is it possible to replace the cable in a DC05 cable rewind assembly? I do not appear to be able to remove the spring housing from the rest of the assembly the disk with the cable exit hole seems to be fixed is it removable?
Yes it clips out ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum
I am a Philips pensioner and purchased a "AZUR EXCEL PLUS 555" steam iron from them many years ago.There is now a fraying of the cable as it leaves the iron with resulting in arcing. There is a detachable backplate on this model which allows corded or cordless use but which cannot be accessed to allow for cable repair by the user. My qustion is can this be repaired or if not can I still purchase a replacement backplate complete with new cable as I this is a great iron and a credit to philips
Replace cable or re attach cable to dyson dc04
... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum
WH5205 upright vacuum power cable replacement. How do you get at the cable connections inside? HELP! :(
... Hoover Vacuums
Hoover U6434-900 self-propell cable and actuator arm replacement
... Hoover U6434-900 Bagged Upright Vacuum
Cable broken, how to replace - Hoover 6473-900
... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
I have a Kirby Heritage II Turbo and I need a user's manual, but can't find one anywhere. I have to replace the fill tube in the bag and can see the cable tie on top that holds it in place, but don't know how it's attached to the mini-emtor. If I can't replace the fill tube, will tape fix it? If I just taped it; will it hold? Thanks.
Taping usually just causes a mess. The mini-emptor has coarse threads on it that the fill tube screws on to. Occasionally there is a cable tie on the bottom which is not really necessary. If you cut the tube near the bottom, you can get hold of it's ... Kirby Heritage II Vacuum
The Panasonic MC-V7515 has two belts. The local vacuum repair guy says he only has a part number for the drive belt, which is UB-9. How do I find a replacement for the other belt, the one which directly drives the beater bars? By the way, this vacuum has great suction, but otherwise is far inferior to my previous Panasonic vacuums. The cheaper models aren't a good buy--stick with the more expensive models.
... Panasonic MC-V7515 Bagged Upright Vacuum
I have a dyson dc 05 and a wire has come disconnected from the main cable inside the machine how do i get the wheel off to reconnect the cable
In the centre of each wheel there is a different colour plug. This must be removed before the wheel can be pulled off. I used a small screwdriver to prise it out. You will probably damage the plug in removing it but they are easily available online a ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum
Central vac our central vac will not work unless the main vac in the garage is switched on manualy.... its sucking fine but i have to switch it off at the main switch in the garage after i have used it normaly i just plug in the hose and vac away and it switches itself off we have just had cable installed with a fisher guy in the walls do you think that would be the problem thanks a lot
It is possible that the low voltage wiring that controls your central vacuum has been damaged during the cable work. You can check to see if the low voltage relay is working by shorting the two terminals together at the unit. Just disconnect the two ... M&S Systems AirVac AVP1200 Platinum Series Central Vac - 12,000 sq ft Bagged Central System Vacuum
What size cable do i need to replace damaged cable
Mains flex, Twin Core, 6 Amp (0.75mm2).\015\012\015\012Most electrical shops will sell it by the metre. They'll probably have it with a choice of grey/black/white/orange outer sheath. However, if your original cable was purple, and you ... Dyson DCO7 Animal Bagless Upright Cyclonic Vacuum