Having problems with your Vacuums ?

I HAVE TRYED TO CHANGE THE CODE BUT NOW i CANT OPEN THE SAFE, HOW CAN i GET IT OPEN?? how can I reset a medalist electronic digital safe?

Answers :

I tried to search for the manual or guide of your Medalist Electronic Digital Safe but I cannot find any.

Most electronic digital safe has a small rubber hole plug either near the keypad or at the bottom of the door. Check your safe and see if you'll see a rubber hole plug. If you do, remove the rubber plug and you will see a small hole. That hole will allow you to open the safe door.

You need either the key that came with the safe (if there is) or a small allen key that you can use. Once the door is opened, locate the reset button on the inside of the door. You may need a pen or sharp thin object to push the reset button. Hold it down for 30 seconds and then release it.

After that, you can now set a new code for your safe. If you cannot still open your safe, contact the dealer and see if they have a digital decoder, so that they can reset the code even though the door is closed.

Thank you and good luck!
\015\012Try the following steps…
\015\012menu > settings > security > change lock code > apply master code in place of lock code and press ok > enter new code what you wantLet us know if you want something more else please accept the suggestion.
\015\012Pull the panel off the front and use the key you got with it then use the reset button inside and enter a new pass code
\015\012Let us know if you want something more else accept the suggestion.
\015\012Thank You for contacting Fixya.com
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I HAVE TRYED TO CHANGE THE CODE BUT NOW i CANT OPEN THE SAFE, HOW CAN i GET IT OPEN?? how can I reset a medalist electronic digital safe?

I tried to search for the manual or guide of your Medalist Electronic Digital Safe but I cannot find any. Most electronic digital safe has a small rubber hole plug either near the keypad or at the bottom of the door. Check your safe and s ... Vacuums

I have bought a house with a Bricard electronic wall safe which might be useful but which is locked open (ie the locks are out but the door is open). I do not know the pin code and there does not appear to be a manual. Any ideas on how I can get this back into working order?

... Vacuums

Hi, have lost keys to my digital electronic safe - S-25EY manufactured by Walter Werkzeuge - have key/lock number, where can I purchase key as battery is dead and I can't open safe?

... Vacuums

Safewell electronic system safe won't recognise my digital code - remains locked with flashing yellow light and beep. I have changed the batteries. Key still works.

... Vacuums

I have Pro Safe PSF80 and everytime I enter my password, the lights are blinking and can't open the safe. Since the only way to reset my password is when the door opens, I cna't reset it either. I need yuor help, how to fix this problem.

2 blows with a pickaxe on the hinge and it was open in less than 1 minute ... Vacuums

Matching or changing codes for a stanley garage door opener. I have a mod. 3100.14 opener and am trying to get it to work with a remote that works on my other stanley door. I changed the codes on the remote to match the opener but nothing happens.

... Stanley Vacuums

HA-871? I'm not sure if anyone can help with this, but I've got a **** Smith brand HA-871 alarm system which I haven't used in years. When trying to get it working, not only have I forgotten the code but I can't remember how to enter it (as in, 4 digits and a #, or just the 4 digits, or something else...?). As I am able to get into the alarm box with the key, does anyone know how to reset it and enter the code? I can't find the manual either. Thanks to anyone able to help with this!

Incase you are still interested you set the code with the four jumpers inside the unit.\015\0121st digit is the brown wire\015\0122nd digit is red wire\015\0123rd digit is orange\015\0124th digit is yellow ... Vacuums

Hi, i have an el safe model E03/E07 502 safe, and i have somehow changed the password or reset it or something, the safe is on my wall so i cant take it off to a locksmith, if you have any suggestions for me to try please let me know thanks

... Vacuums

I was vacuuming and noticed that the bag needed changing. the red light with the ! inside the triangle also came on. When the bag was changed, the vacuum would not restart. The red light came on. Tried the reset button but nothing happened. Tried unplugging and re-plugging in and nothing happened. Replaced all the filters and still it wouldh't start. So I brought it downstairs and tried one more time to get it to start. it worked! Is there something wrong with the vacuum cleaner? Was it overheat

It was overheated that is why it worked downstairs after cooling off. ... Miele S548 Bagged Canister Vacuum

How do you reset a pro series safe is not working and the keys are not as well, what can I do to get into the safe?

... Vacuums

Change belt How do I open the power head to get to the belt to change it?

... Beam Rugmaster Plus Belt

I opened the cannister to change the bag and when I closed it the motor switch will not turn on. The second position which turns on the attachment for rugs still comes on. We thougth it was the switch so we ordered the part and it is still doing the same thing. Is there a reset button somewhere inside? The only reset button I see is on the attachment which is working.

It can be a few things. First check the overload protector located on top of the canister. If it has tripped the unit will not run. Push it in to reset. \015\012If that is the problem check the motor safety filter to see if it is clogged and caused t ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

I have model RGR126 Wireless Rain Monitor. All of a sudden, it has quit registering outside temperature. I changed the battery in the outside sensor and even pushed the reset button, but nothing I have done is fixing the problem. Please help! I really miss getting the temperature outside before I get dressed for work. Thanks.

... Vacuums

I have a Z345 Electrolux cylinder vacuum cleaner, from the 1970s probably, but not used much. I have lost the guide. I forgot to change the bag before it was full. Smoke started to come out - smelling of burnt paper, not rubber. So switched off. It did not blow the fuse, and may be OK. I wish to inspect it. How do I open it up? Alos I have an air filter and a motor filter for it. I have often changed the air filter on the top. How do I get at the motor filter, if there is one? Than

Good day! OK you have to is replaced the bag and that's it.And don't forget to change the bag again to avoid that problem.Thank you ... Electrolux Guardian Bagged Canister Vacuum

Miele Cat & Dog vacuum gets VERY hot and is VERY loud. Hose has no restrictions and I have changed the dust compartment (motor) filter and the exhaust filter. It still gets hot when I run it with the top open and all filters removed, so I'm guessing the problem is with the motor. Should I be going into the motor compartment? If so, what am I looking for?

Hi\015\012\015\012The fact that it gets very hot could be due to a number of issues.,but the fact that it started making a very loud noise at the same time suggests that there might be more problems maybe brushes etc.\015\012\ ... Miele S514 Solaris Bagged Canister Vacuum

I have lost my manual for Nexxtech thermometer model6312030. I can't get it to read the outside temperature after I changed the batteries. How do I reset to make it read. Or better yet, how can I get a copy of the manual?

The problem here was solved but replacing weak batteries in the main unit and pressing reset on the main unitIt took a minute or two for the temps to update ... Vacuums

I do not know how to open the vacuum to get access to change bags. the bosch pro parquent vacuum cleaner

... Bosch BSA2822 Pro-Parquet Bagged Canister Vacuum

How do i open the miele vacuum to get at the electronics?

... Miele S514 Solaris Electro Plus Vacuum

I want to change the motor on my Electrolux 6500 Epic. How do you get the shell open?

Some use computer proof torx screws,youll ned a v long screwdriver.cheaper to buy another one new ... Electrolux Epic 6500 Vacuum

I have a digital alarm clock from Next - it has the followin gfeatures a mode button - none of the options include time or hour etc an alarm on/off button a button with plus at the top and minus at the bottom. I'm trying to reset it because of the clock change and am baffled.

Hi Karen,Sounds like a neat clock! I can't find anything about this clock. Other projection clocks set the time change automatically. What happens when you try to push the + button. Does it set the time ahead?Also, what ... Vacuums

Vacuum cleaner does not start after getting warm, bag, that was full is changed, lights run across dispaly at top when I try to start it, cannot find my manual, can I download a manual for Excellio z 5240. Is there a fuse of something that has bo be reset?

... Electrolux Vacuums

Tryinh to get instruction manual for cathedral electronic safe 20ea

... Vacuums

I was changing a light bulb with one of those metal extension rods that unscrew and screw back in the replacement bulbs. It evidently didn't seat correctly and pulled off the bulb and created a quick "poof" type electrical short. I have switched out that bad bulb with a new one and can't get either the fan or lights to work. There doesn't appear to be a reset switch. I also swirched out the wall switch to see if that would make a difference and it does not. Any thoughts or ideas would be appreci

If you have not already done so, I would check at the fuse or circuit breaker panel to see if you have blown a fuse or tripped a breaker. ... Vacuums

Change the belt in my kenmore power-mate 120 amps...how to open it to get to where the belt is???


I'm trying to change the filter....One person told me to open the hose end and take the bag out and go from there, but that isn't the right way!!! It's the other end where a couple brushes are able to be stored on top of the canister, but I can't figure out how to get that section off..it's as tight as a drum HELP PLEASE and thanks. Betty

There's a tab at the middle of the lower back of the tool holder (air diffuser). Pressing in on that tab should enable you to lift the back of the holder first, then lift off the whole thing. It will come off, just make sure the tab is in far enoug ... Electrolux Epic 6500 Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0943 seconds