Having problems with your Vacuums ?

Vacuum brush not turning on Bissell

\015 Vacuum motor is on but brush will not spin when the grey button is engaged. I have no idea what could be the problem. Any thoughts?thanksmpinkney\015

Answers :

Wish you had posted the model number, but it could be a broken belt and/or brush roll. Some of the Bissells had a separate brsuh roll motor which may be bad.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Brush will not turn on on my Bissell Healthy home vacuum, the brush button is depressed and brush is clear. The vacuum motor works fine, just the brush will not turn on. Is there a part to replace?


... Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue

My Bissell Model 3760-4 is not working properly. The belt has been replaced (and checked 3 times), but the brush bar does not move when the brush motor button is on. The little metal turning piece that turns the belt is turnable with one's finger when the belt is off, but when we put it all back together and turn on the vacuum, the brush bar does not go around and the burning belt smell returns. The portable part of the machine works properly. It's the brush bar. It has been cleared of hair, etc


... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

I have the bissell power force bagged upright vacuum and the brush is not turning, I have replaced the belt but the brush will not move but the metal piece that is hooked to the motor that spins the belt and brush is turning but the brush won't, and the belt starts to burn


Sounds like your brush roll is seized. Remove the brush roll (see picture) and make both of the end caps spin freely. If not, replace it and you should be set. *An example of a brush roll* ... Bissell 3522 PowerForce Bagged Upright Vacuum

Bissell 82H1 vacuum brush won't turn - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

I have a problem with my model 6585-3 bissell upright powerforce bagless turbo with turbo brush vacuum The brush has quit spinning upon removal i noticed that one side of the brush was free to spin the other side that has the rectangular piece to help hold into place seems to be locked up and will not spin is it corroded or have i lost a piece that joins with it that allows it to spin freely belts are good and motor is turning brush will not budge


... Vacuums

My brush will not turn on my Bissell 6393 upright bagless vacuum... what is wrong? The belt broke and I replaced it twice... I now have 6 more replacements but the brush still won't rotate. Do I have to get a new brush?


This type of plastic brush roll fails pretty frequently. Hair and other debis gets jammed in the end caps. The hair and debris gets hot which in turn tends to melt the plastic end caps. Remove your brush roll, hold the ends with your fingers and try ... Vacuums

Bissell 82H1 Brush won't turn - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

Bissell 4104-w brush not turning - Bissell 4104 Bagless Upright Cyclonic Vacuum


... Bissell 4104 Bagless Upright Cyclonic Vacuum

My bissell brushes are not turning - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have had my Bissell Healthy Home for just over a year. I use it once or twice a week on five area rugs and two small bedrooms with wall to wall carpet. Just recently, the motor started to sound extremely loud and it smells like it's burning. The vacuum still picks up everything and all the brushes are turning. Advice? I really like this vacuum and would really like to fix it rather than replace it!


Hi,Here is a tip that I wrote about my Bissel but I bet you have the same problem and the hose is clogged...Bissell Bagless Upright Vacuum no ... Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum

Bissell vacuum model 3760 brush will turn but there is no suction


... Bissell 37601 LiftOff Revolution Turbo Bagless Upright Cyclonic Vacuum

Vacuum brush not turning on Bissell


Wish you had posted the model number, but it could be a broken belt and/or brush roll. Some of the Bissells had a separate brsuh roll motor which may be bad. ... Vacuums

For some reason, when I tried to put the floor vacuum attachment back on and vacuum the carpet, I realized that the belt was not engaging. the belt is in there and not broken, but it is not turning the beater brush. it is just hanging loose around the brush. When I turn the wheel to engage the brush, it picks the belt up, but when I attach the vacuum to the attachment, the brush is just not turning.


... Kirby Ultimate G Bagged Upright Vacuum

Stopped running My mother's Oreck vacuum sound as if there was something bogging the rotating brush down. I pulled the bottom cover off and found nothing wrapped around or restricting the brush. I tried to finish vacuuming with the problem then I turned it off to move a chair and turned it back on it would do nothing. Any suggestions as to what could be causing the vacuum to sound as if the rotating brush is being restricted from turning. There was not odor of burning as if the motor was in a bi


Orecks have a plastic fan inside and everything you pick up hits it, sometimes things can get stuck in there or break the fan locking up the motor. With the machine off, poke around where the dirt goes into the motor, behind the roller and see if you ... Oreck XL Ultra Bagged Upright Vacuum

My Dyson Blueprint bagless rollerball vacuum brush refuses to turn every so often. Everything is connected properly, nothing is clogged in the brush, the vacuum power is turned on and then the brush bar control is released, but the brush still does not turn.


... Dyson Vacuums

Brush won't turn. - Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum


Is the grey "brush" button on the handle depressed? Brush won't turn unless the button is down ... Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum

Brush won't turn - Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue


Remove the bottom plate and check the belt for breakage. If it is, it will need to be replaced. Remove the brush assembly and check the end bearings for debris accumulation. Clean the brush bearing ends and the bearing interiors. Re-lube with 3-1 oil ... Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue

Brushes not turning - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Bad belt or hair etc keeping them from turning...take it apart carefully and inspect for worn belt or broken belt, and or hair string etc. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

My 5770 bissell vacuum brushes won't turn on.


... Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum

Brush not turning and no suction - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell bagless vacuum cleaner - the brush won't turn - why?


... Bissell 3750 Lift Off Bagless Upright Vacuum

Brushes do not turn /model9200 - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

The brush will not turn - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


Hi! Your question has come up under Bissell ProHeat, so I'll assume that's the model you're talking about. \015\012There are several possibilities. The simplest is that the drive belt has broken. There are two drive belts on the ProHeat and you' ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Brush doesn't turn when on carpet - Bissell 3920 Bagless Upright Vacuum


This sounds like the beater brush drive belt is either slipping, off the pulley, or broken. Unplug the vac, turn the unit over, and remove the bottom plate which may require you take out some screws.\015\012\015\012Depending on your mode ... Bissell 3920 Bagless Upright Vacuum

Brushes won't turn - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


I did not read the entire manual, but I believe this should help you find your problem. http://ne ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1157 seconds