Having problems with your Vacuums ?
I need a Manual for Elna Baby Lock about 10 years old
Repair Help & Product Troubleshooting for Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I need a Manual for Elna Baby Lock about 10 years old
Http://www.tradebit.com/filesharing.php/search/0/elna/0/1 ... Vacuums
I bought an old Juki Baby Lock 418 at a garage sale. It will sew for 3 or 4 inches and then seems to be off timing and locks up. I have no instruction manual. Is there a manual available for this old machine? I would prefer a downloadable manual because I already have money invested in the machine which doesn't seem to work. It was suppose to have been gone over at a repair shop before I purchased it and was told that it worked. .
FOR dlh2457: Just came across your post to another person's dilemma. I found this Baby Lock BL4 428 serger at a thrift store. It powers on but I know nothing about its use. I don't want to spend $14 plus for an owner's manual and find out this machine does not function properly or possibly damage it by improperly threading it or having it out of adjustment. I'm in need of an owner's manual for a Baby Lock BL4 428. If that offer is still good I'll take a "copy" of it and will compensate you for
I've found it , it costs 9.95$ , together with shipping it will cost 15.93$ at your doorstep.Bit more than 14$ but that is th cheapest one.Symply ... Vacuums
I need to get instruction manual and some receips for the Welbilt Bread Machine, I just got from my 80 year old Mother. She only used it once or twice but does not remember where the manual is. The machine Model is ABM 3600. I hope this is the only information that you need. Thank you very much.
I think I have just found what you need...\012\012Please check this page:http://www.manualsonline.com/ex/thread/view/idThread/166697The link is marked "Welbilt_ABM3600_Manual.pdf"Could you please check ... Vacuums
Need duplicate manual for europro shark steamer . lost manual, steamer is about 2 years old, never been used.
Hi,The link for the manuals...Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pr ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
I have a Baby Lock Serger Model BL4-605 Serger and can't find the Instruction Manual. Where can I find one? Also, I need a threading guide now, can you help?
I actually have the same model. I have the manual, but it is not very helpful. It does give instructions on treading, but not much else. You can download this manual online and it will cost at least $10.00. ... Vacuums
Need manual Baby Lock Design Pro B21 sewing machine
I need the manual to a baby lock companion intel a stitch 7500 sewing machine
IjI need a new foot control for my old Elna model. It is an Elnasuper 62c/H401048. The foot control has the ID# of 447300-1, a new power chord would be great to. I have had this machine for40 years.
I'm in need of the manual for a Baby Lock 2600. Any ideas where I can find one?
Need a replacement on/off switch for Dirt Devil Deluxe Model 8201 (more than 12 years old). We have the old one out. We just need a new one to replace it. Where can we get one?
... Dirt Devil Vacuums
Bissel spot bot water not coming out of tank is not a year old and tried manual wand and the water doesn't come out there either. any advice. Is not a year old yet.
You could take the end of the handle off 2 screws i think check the line for a clog or just take it to a bissell service center it will be covered under warranty ... Bissell SpotBot Robotic Wet/Dry Vacuum
Dear Sir/Madam, My old faithful Hamilton Beach Mixer, now 60 years old, is still working but recently I was told by someone who looked at the motor that it needed repair or replacement. Is it still possible to get it in working condition?
If the armature shaft is worn there might be a problem, but that would be about the only one, Bushes/bearings can be replaced as can brushes. If the armature shaft is worn, a fix can be formulated but it will require some ... Vacuums
We have a Singer 626 sewing machine. It's an old mechanical machine with heavy metal parts. The stitch selector was stuck, I removed the top and helped the selector to move. when I had to move the selector again, it was stuck and I pushed too hard and broke a component. I can fix the machine if I had a repair manual. I need to buy a repair manual. How and where can I get one? Thankjs Charlie PS. Im pretty mechanicly inclined and I was able to clean the machine and get it to work after
Philips Norelco Arcitec electric shaver: When I press the on/off button, a "lock" symbol appears. The shaver then will NOT work until placed on the charger for a few minutes. This lock icon has never appeared before. About 2 years old.
This is a travel lock feature. The lock is activated by pressing the on/off button and holding it for 3 seconds. This will lock the razor in case it is turned on during travel. ... Vacuums
Shark/cordless /sweeper - over four years old. Started - but seemed like it was caught and shut off almost immediately. Not used year around - tried to start after absence. I have removed some hair and perhaps dental floss. Checked belt - it seems O.K. Do I need a new battery or is it just worn out.
Check the brush,is there any dirt got stuck in between brush rolls.If there is then it needs to be cleaned.Your cordless sweeper will automatically shut off if an obstruction is caught in the brush roll. the other thing to checks is dust contai ... Vacuums
Need the manual on how to run (put together and all) the hoover steam vac v2 (widepath) with auto rinse) we tried today and when we leaned it back (so we could run it on the carpet) water started pouring out all over the machine and got the carpet (like flooded) wet :( this one was me mom's and she passed on approx 2 1/2 years :( she always kept the manuals for everything but we caint find this one :( ... thnx
God Bless Your Mom.\015\012\015\012Hope this was helpfull to you. Sawdust46\015\012\015\012http://www.hoover.com/pdfs/manuals/F7411900.p ... Vacuums
I just bought this vacuum at a second hand store. My girlfriend told me to grab it as it such a quailty product. How ever I can't find a model number or anything else. I need a manual please. Does it take bags? Do I need to replace the filter or just wash the one I have? It is black and silver, cannister. It also says big gary's vacuum system warehouse in surry British Columbia, Canada. It also says to use filter pow-r-nozzle 96. I have no idea of the year.
I suggest you google what you know. I dont think anyone here can suggest where you can get a manual for a machine you dont even know the name of.\015\012\015\012You ask about a bag ... I dont know ... is there one in it now? You ask abo ... Vacuums
Elna Top 300 sewing machine. I need manual to operate this machine. I have already found out that Elna contracted with Tiwan(excuse my spelling) to make there machine between 1989-1991. I want to know which machine made in Switzerland is comperable to this one. Thanks...Audrey Sorry about the catagory...but you do not have sewing machine on list.
Isoj:\015\012\015\012I have this machine. I use it for my heavy sewing, as it will go through anything. I would be happy to copy the manual and send it to you for copy costs. Just let me know. I would love to know what knowledge you h ... Vacuums
I have a whirlpool personal valet steamer system that is mounted to the wall. The system was in the house when I purchased it so I would suspect it's about 8 - 10 years old and I cannot find the manual for it. When I push the start button it automaitcally cancels the set up and will not run. I have unplugged it for a while and then put it back in and it's worked before but not anly longer. How do i get a manual or can I find a repair person to look at it.
I have a Bissell PowerSteamer, Clearview approximately six years old. My son borrowed it two years ago and lost the instructions. I can't find a model number on it and need the instruction book. Thanks
Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
I have a 3 or 4 year old Hoover steam carpet cleaner: model # F 5857-900 It stopped working and does not vacuum up liquids or dispense liquids for the water container. Where can I take it for repair? I live in Colchester,CT 06415. Also,is there any written repair manual that my husband might be able to use?
Hi I have a delonghi TW15E wet / dry vacuum cylinder vacuum cleaner ( around 4- 5 years old now ) , and have lost the instruction manual...can you advise how to use it for carpet cleaning / and or how to get another copy of instructions
... DeLonghi XM5080 Wet/Dry Vacuum
I am trying to replace the power cord for my 82 year old father-in-law's Oreck XL 2600HH. He already took it apart. I need to know where the semi U shaped spring steel piece is supposed to go inside the Helping Hand Handle? Any drawings or schematics available? Thank you for your time. Arthur
That justs lies on the inner handle whenb you put the spring back. There should be two holds where each end of the spring sits in. ... Oreck XL Ultra Bagged Upright Vacuum
I purchased a used Minuteman 2400 series buffer/burnisher over the weekend from a store that is closing. The unit is about 7-8 years old. I did not get a manual with this item, can you help me out with this. I would like to read up on it so if I have problems I can look back on it. Even as far as the operation of it would help to have a book for it. Linda
I have this manual available via email. chris321 at gmail. ... Vacuums