Having problems with your Vacuums ?

I have a bravetti platinum pro deep fryer model number f1066 and i need a plug in cord replaced for it. Its the kind that if someone bumps it it will come out for safety. It s magnetic could i order another one please?

Answers :

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a bravetti platinum pro deep fryer model number f1066 and i need a plug in cord replaced for it. Its the kind that if someone bumps it it will come out for safety. It s magnetic could i order another one please?

... Vacuums

While using, steam stopped coming out in force at the port levels in the head. Suddenly started high pitch whining, pressed button just above connection site and end flew off with great force pouring water onto floor and carpet. Unplugged immediately for safety and unable to get it to deliver steam force again. Less than one year old and used only 8-10 times only in walk areas where there is no carpet with distilled water. Please, advise, cannot find booklet. Thanks So Much, Beverly Crumme

Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head...Euro ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

We have the water hooked up at the back of machine. there is a spout for the water to come in and fill the ice tray.but is does not. If we turn the water on it fills up the space under the ice basket. I keep getting red light and then the two smal llight one ice and one water come on. We can hear the motor trying to fill the ice try and then lights come on. Please help me this so I can use this product. It did not come with a manual.

The water inlet valve on the back of unit opens when the ice maker needs water. If the valve doesn't seal good because of sediment or wear it will continue to drip and when the water reaches the ice maker supply tube it will freeze blocking the fill ... Vacuums

I have a VX3000C Broan vacuum and the motor sometimes runs lower and comes back to normal time and time. Plus, now it lamost stops before coming back to normal speed. Can someone explain to me what that might be or if it did happen to someone else? It doesn't stop, but runs at very low speed and come back. It is like if a connection is not made properly. But it does the same at my 3 connections and I did check the one on the vaccuum itselfs.

... Broan-NuTone VX475 Bagged Central System Vacuum

I have the Saeco Xelsis. When making 2 capacinos one after the other. The first one is great with the second one the milk comes out good but the coffee just drips very very slowly. I have had the machine for 4 weeks. This just started. What can I do to fix it? Please help. Thanks Mary

... Saeco Vacuums

The belt keeps coming off. There is a little U shaped metal piece that came off when the belt first came off. Where does it go? When we first got the vacuum, we sucked something up and the belt came off and that little metal piece fell out. The belt now periodically comes off when we bump something. Please help us!!!!!!!!!!!!

... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Please I'm old and i need my scuincy steamer and I paid for one and now even you feel is hot is not steam come out. I don't have money to buy a new one and maybe I am doing something wrong. God Bless you, Teresa Escobar

Hi,from your problem it's obvious that there is a build up clogging in the steam line,hence the steam is unable to come out,it was happened to me,here is my solution;\015\012\015\012\015\012I filled tank with white vinegar and allow ... Scunci 52067 Handheld Steam Vacuum

Wiring diagram took wires off motor and do not know which goes where.There are two main from plug in one whit one black then two of same coming from light in front.On the motor ther are more terminals than wires.On diagonal corners there are black dots.Can you please help this cost 800$ and do not want to burn the motor due to crossing pos and neg.Do you have a picture or know where I can find?

... Oreck XL21 Bagged Upright Vacuum

Just got a Polti Vaporetto 1020 from someone and cannot get it to work. One yellow light lit up and was on for a few minutes then turned off...and there is nothing...flip the switch on the handle, nothing...flipped other yellow button, nothing...any suggestions? or where I might get directions on how to use it? didn't come with manual. Many thanks. best, pat

... Polti Vaporetto 2400 Canister Steam Vacuum

I have singer fashion maker 2818. The problem is the bobin casing (the one which holds the bobin)is coming out (i.e) loose. trying to fix it in place but not sucessful. can someone explain how to open and fix the case and place the other supporting covering so that there is smooth motion of the needle and the bobin.

... Singer Vacuums

Unbeknownst to me, someone took the bag out of my Kenmore Progressive vacuum and failed to replace it. I have been vacuuming without a bag for months, and today the vacuum stopped sucking. When I opened up the front to replace the bag, tons of dirt and dust came pouring out. I thoroughly cleaned the vacuum, put in a new bag, but still no sucking power. Just dust coming from the rear vents where one of the filters is. Is the vacuum ruined, or is it a simple solution of buying a new filter?

Sounds like you need to buy a new motor. All that grit and dust will ruin a motor and I'm surprised it lasted as long as it did.\015\012This is where a vacuum that won't run without a bag would have been nice. (Aerus for one) ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Hello, I,ve just bought an Italian designed 3 bulb 70's wall lamp. It has a 2 wire lead feeding out with 2 wire lead running from one bulb socket To the other 2 inside the casing. I'm trying to wire it in my porch which has 3 wire cable coming from a 13amp plug for power. Any suggestions on making this work please ?

... Vacuums

I have lost the Manual for my Pfaff Coverlock 4.0 Serger (it's a special kind of sewing machine) Can you find me a place I can download one please?

Hello.You can check it here as I'm not sure what is your model number.If that is not the ma ... Vacuums

I have a problem with my Shark Euro Pro Electric Flatiron. I purchased it a few years ago and can't locate my manual to find out what to do. The steamer button doesn't want to press down all the way so just a little steam comes out instead of the full one like it should. Please help!

... Vacuums

Kirby Sentria Shampooer is not foaming the width of the tray. It is only coming out on one line and is saturating the carpet with water in that area. What is the problem? What do I do? We just bought this 5 mos. ago. Please help.

Your shampooer is not broken. (sorry Fanny)\015\012\015\012You are missing a wee screen that fits on the hole where the little hose plugs into the tank. Check inside the hose end or down inside your shampooer box. Here's a link to my onli ... Kirby Ultimate G Bagged Upright Vacuum

Brushes can some one please help me with my steam cleaner I have never used it myself but someone else did and Im not sure how to turn the brushs on .....i have never used it

Sounds like the belt is broken or at least the brushes are bound up with carpet fibers. Take a look and see which it is. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I have lost my manual book for my bissell 525m1 and need another one please.

I'm not finding your model #, 525m1, but the below site has most, if not all, of the available Bissel vacuum models.\015\012\015\012 ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Broken Piece In the neck of the hose where it meets the head there's some kind of adjustable piece that goes inside the tip of the hose to hold the two together. It resembles a "C". Cleaning lady broke it and I'm trying to figure out where together another one. Anyone know what I'm talking about? Thanks!

... Electrolux Harmony Canister Vacuum - EL6985 Vacuum

We have a kirby not sure whick one it is. Has the following numbers on it. 1071203326 and also in another location is has 179.123 Can you please tell me if it is a Kirby 4 or what model it is.

This machine was manufactured on Dec. 3, 2007. It should be a Generation 7 or Ultimate G. It should have the name on the handle graphic. ... Kirby Ultimate G Bagged Upright Vacuum

Unit does not spray water for deep cleaning. One can hear the motor running of the ''spray'' action, but no water comes out. I have followed the DVD instructions exactly. Please advise Thanks Anne

Sounds like you have an air lock in line before motor. turn unit upside down and disconect hoses. reconnect and try again with plain water. good luck ... Vacuums

Theres no spray coming out but theres solution in. ive checked seals, turned off left it and primed it. it works for 1 stroke then im bk to square one again. please help me

You need to check the seals. It is loosing prime after one stroke. I had the same problem and found obstructions causing a seal to leak and allowing air into the sytem. Take it completely apart and clean thouroughly.Also do you have the dial to choos ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Operating manual i have lost my operating manual for my bissell Model #9500 proheat x2 cleaner. where can i get another manual? on one of the sites it shows that i can download the manual but for some reason i can not down load it. can you please help me with this problem?

BISSELL User's Guides can be downloaded at www.bissell.com\015\012On the front page under Customer Service click on User's Guides and enter the model number of your unit.\015\012User Guide will be displayed as a PDF file. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Tafel Steam Iron Model 2820 3.12 104 - switch connections - can you please explain how this is works Iron stoped workin open the back and one of cales to the switch is hanging loose - but can not workout the obvious way to reconnect - can you help by showing me a diagram of the switch mechanism kind regrad

... Vacuums

I have a coralife aqualight model 53008. It uses two 65watt compact bulbs. The whole light quit working one day. I tested the bulbs in another aqualight I have and the bulbs were fine. I want to know where the ballast is. I opened up the ends and the wires are so secure I cannot pull on them to locate a ballast. Please advise if this is a ballast problem and how do I replace it. Thanks Linda

... Vacuums

Nilfisk GD-2000. Same problem with the new vacuum as the old one, runs 30 seconds to a minute & shuts down. Sometimes it'll start & run another 30 seconds or so, but shuts down. Other times it won't start back up at all. No clogs & bag is new. Please help.

... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0599 seconds