Having problems with your Vacuums ?

How do you set the time and alarm on a Zenith Z1261S??

Answers :

Body{padding: 10px;}#Post p {margin: 0px; padding: 0px;}#Post ul{padding: 0px;margin: 0px;list-style-position: inside;}The time settings is under the top panel of the clock-radio. Turn the device to the back. There are two screws at the top and a message saying unscrew them to take off top. Remove the screws and take the top off. You might have to pry it off a bit. There are white buttons underneath the plate. Press the "time" button and then use the back-forth buttons on the front to adjust the time. You have to adjust the time minute-by-minute. There is no hour button. You have to keep holding down the forward-reverse keys until you get to the right time. Replace the top panel and screw in the screws to put back together. You might have to open the CD door to pull the panel through the front catches. And that should do it. (By the way, this is a hotel clock radio, not a vacuum cleaner!)
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do you set the time and alarm on a Zenith Z1261S??

Body{padding: 10px;}#Post p {margin: 0px; padding: 0px;}#Post ul{padding: 0px;margin: 0px;list-style-position: inside;}The time settings is under the top panel of the clock-radio. Turn the device to the back. There are two screws at the top and a me ... Vacuums

Bought today a used rca rp3721a clock radio without the manual. need user manual to adjust all the settings, for example TIME, ALARM TIME, ALARM ON AND OFF, radio or "beeper" alarm on, entire unit on and off without unplugging it from shore power,and anything I haven't thought of up to here. The unit is RCA Model RP3721A clock radio, and appears to be functional. Our problem seems to be "the nut behind the wheel". e-mail: [email protected]

Hello,I advice you check the links below to search for the\015\012manual of your device, the link contain almost virtually all the manuals of all \015\012device.manualsonline.comORmanualnguide.com ... Vacuums

I dropped my battery operated alarm clock: the second hand still works but the alarm doesn't come on at the set time and the hour & minute hands don't "hold" their position - I took the clear front off and discovered that I could move the hands to a more secure place on the center spindle but I discovered during the night that the correct time was no longer showing. I really like this clock b/c it's battery operated and I can hear the alarm (when it worked) plus it has a "night vision" dial tha

The hour and minute hands can be pushed onto their respective shafts at any point in most clocks.\012If you already know the time that the alarm is set, let the clock run until it sounds. \012When the alarm sounds, install the hour hand a ... Vacuums

I have just purchased a second hand AWA CRD176X CD Clock radio that did not come with a manual and I am having trouble setting the time, alarm time etc. Can you please help out at all. Thanks in advance Chris

Hi Chris, is this the one?Like most of this type, it should have a button named TIME, and another one named ... Vacuums

I'm using my dad's old Panasonic RC-6064 alarm clock. How do I set the time and the alarm?

The Hour/Minute buttons are on the bottom of the radio. Just press the hour or minute buttons to adjust the regular time. Alarm is the same but you hold the alarm button on top. ... Vacuums

I bought a Caixing CX-2158 led digital clock in Thailand and there aren't any instructions to operate it eg; set time alarm etc. Can you help please? (i am in Australia.) Thank you in anticipation.

I \012bought a Caixing CX-2158 led digital clock in Thailand and there aren't \012any instructions to operate it eg; set time alarm etc. Can you help \012please? Philippines Thank you in anticipation. ... Vacuums

How do you set the time on the nexxtech am/fm alarm clock with cd player model no.1219568?

Hold the Timer button then press the Hour / Minute buttons to set the time. ... NexxTech Vacuums

How to set time & change the alarm for a atomic clock mode 86742

... Vacuums

My daughter has an onn wa 230 cube radio alarm clock - no instructions and cant work out how to set the time...any advice gratefully received

Press time\\alarm button three times for min hand and again for hour ... Vacuums

How do you set the time for a Memorex model # Mi 4019 - BLK IPOD Docking station with alarm clock?

... Vacuums

Fast Forward time set feature no longer works. (With this feature, pressing and holding time set and up arrow buttons will rapidly advance time through hours and minutes.) Unit is out of warranty and I need to know the cost of repair.

Hi,the cost of fixing this problem depends on the discretion of the technician,however,in all ramifications,it won't cost you more than $50.\015\012\015\012\015\012Thanks and take care ... Vacuums

I just purchased a westclox tech model 70014 yesterday. I read the instructions and set the time. About an hour later, the time reverted back two hours. I read the instructions again and repeated setting the correct time. I assumed it was working. However, I woke up by myself today at 5:30am, but the clock read 1:14. Is there any way I can fix this or is it a manufacturing defect?

... Vacuums

Hi, the main box where all the wires connect to the sensor has the power on, and i've just noticed the small box where you enter the code to set the alarm does not work, yet the buttons are illuminated, normally the led light displays to show the power but no led's are on, the buttons doesn't work to set the alarm. Can you please hepl, many thanks.

Difficult as you didn't say what the equipment is but it sounds like there is a problem with communication between the main box and the keypad box. Have someone check that all the wires in the keypad are connected and there is no break in one of the ... Vacuums

Hi I have a micromark MM9565 digital time switch and have misplaced the manual, i need to know how to set the time, and how to set the timer. Thanks

... Vacuums

Dirt finder I have a Hoover U6439-900.  After the cleaner was used a few times, the dirt finder light cycles between green and red on the regular setting and will not go to green.  On the sensitive setting, the red light stays on most of the time.  I have tried to run the cleaner to remove any dirt but have not solved the problem.

The sensor may be bad, or it may be coated over with dirt. Re,ove the hose at the back of the vacuum, the head of the sensor is down inside that opening, reach in there and clean it off and see it that corrects the problem, if not replace the sensor ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Model num. 052-8808-8 There are not enough instructions. Where is the manual override? I set the time at 2pm over the arrow and the T , want the timer to come on at 6o'clockpm., set the off time for 10 o'clock pm. Plugged the light in and it came on shouldn't it stay off until 6 o'clock. Need help!

... Vacuums

I cannot find the directions for my Utilitech 1-outlet timer. It has two numbers on the back: #148297 and #TMO1DHBL. I thought that I could just put the time now arrow on the present time and pull up the sections when I wanted the timer on; the only problem is, it lights up whenever it is plugged into the outlet. I just need the directions for setting the timing. Thank you very much Lilla

... Vacuums

I bought a house with a DIGITAL FRONTIER. DFA3400 Hybrid Alarm System but no manual, I do not know how to set the alarm and to put in a code to deactivate the alarm. I need an owners manual.

Key in the 4 digit passwrrd and press "A" button, this will delay for a few minutes for you to leave the house, lock the door before activation.If you are at home and want to arm the alarm immediately, key in your 4 digit password and press H ... Vacuums

On my hover U6616-900 the self propell work fine on the med setting on med height carpet, but when I go to low height carpet and height set on med the self propell does not pull the vacuum and it is hard to push. Also if I raise the height to the highest setting the self propell works correctly and appears to clen. Any ideas? S/N 090400184555, think this vacuum is maybe 5 years old and my wife uses it lots. Should I think of maybe a complete overhaul or a replacement at this time?

This is a typical problem you are describing. I would recommend you change the belts, this will resolve the "hard to push" and most likely resove your issues. based on the s/n given you maching was made on sept 2004. ... Hoover U6616-900 WindTunnel Bagless Upright Vacuum

We have an elgin/advance 4248 alarm clock and NO manual! It had been acting strangely recently. For example: it turned itself into a 24-hour clock, the alarm didn't go off when it should have. the date setting won't change and so on. I could experiment with it if I had the instructions. But we don't. What to do?

... Vacuums

I have a Platinum B70 Cofee maker bought from Costco in June of 2010. I have set the on time, the off time, the temperature (192) and the cup size. All went well until today. Now the machine will not accept cup size. It goes to the max only, and it will NOT brew coffee, even though the window says "Ready to Brew".

Take it back as its under warrenty ,i think it may have a problem with the electronics which could be caused by brown out or a voltage spike ,either way its no good unless the computorised panel works ,my best advice is to buy a small coffee perculat ... Vacuums

I am having problems setting the alarms on my Emerson Smart Set clock

\012Directions for Resetting the Daylight Savings Time (DST) Start & End Dates on the Emerson Research Smartset Dual Alarm Clock Radio (cks5055s):\012\012This should work for all Smar ... Vacuums

I recently purchased this vacuum after reading consumer reports article on it and from recommendations from family. However, since I've had this vacuum it's been nothing but problems! I have a frieze carpet and I have the vacuum set on the highest setting. Each time I use it, the vacuum clogs with carpet fibers before I even finish a room! Any suggestions?

Is that a shag carpet? the power head is raised up all the way can you lower the suction on it is the carpet old the vacuum may not be able to handle the carpet,go to a vacuum store and see if you can try somthing else out some stores well let you re ... Hoover Tempo Widepath Upright Vacuum - Blue

My Kirby Heritage II vacuum is not picking up dirt up out of the carpet like usual, and I have to keep setting it lower to pick anything up. I finally get it to such a low setting that it starts sucking the carpet up and makes a whirring noise, and starts smelling. Every time this happens, we find the belt has been burned. We are wondering if the brush roll inside with the brushes that pick up dirt are worn out and too short?

... Kirby Heritage II Vacuum

I have a Barolo AU9 ws-1 atomic weather station clock. The alarm set . I need to know how to turn the alarm off and on.

Use the + button to scroll to 1, 2, or no alarms (off). ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0425 seconds