Having problems with your Vacuums ?
How do you take the casing of a stirella Simac SX4520D steam iron?
It have a torx-plus T20 screw horizontal under the handle.
Repair Help & Product Troubleshooting for Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
How do you take the casing of a stirella Simac SX4520D steam iron?
It have a torx-plus T20 screw horizontal under the handle. ... Vacuums
November 2008 I bought a Simac Stirella 9000D steam generator iron. Recently its been leaking water out the bottom of the regenerator. It makes a noise when it is trying to get the steam to the iron and it works then but afterwards when the noise stops it stops steaming and I find a puddle of water underneath the regenerator. Also a little steam comes out of the water tank at the top. I understand this is happening because of scale in the base unit. Can I get something to get rid of the scale? -
I have a Simac Stirella No Problem steam generator iron Model no. SX8040D.I cannot control the steam generated.The button is stuck and so the steam is continuous and I am using a lot of distilled water.I have to keep on filling the tank very often I would like to send it for repairs but I do not have a contact number or address. Mohan email@example.com
I have a stirella dual steam iron. At present it is constantly steaming even though the steam button is not clicked in place. How can I fix this?
It sounds like the steam valve inside the iron is stuck open. You have to take the iron apart and free it up by lightly scraping water deposits off it with a screwdriver. ... Vacuums
My simac stirella is producing little or no steam. This is after a period of time when it would produce lots and lots of steam and I wouldn't be able to stop it. Any suggestions?
I have an IS222 Bernina Steam Iron that quit steaming today---the iron heats up but the steam switch doesn't light or heat. It appears that we needs a new steam switch. Can you furnish this?
My breville steam generator iron heats up but doesn't steam. I have only ironed 5 clothes with it.
... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
I have a Tefal GV9150 steam generator iron which has worked perfectly for a few years.However steam is now escaping constantly from the iron plate even when the trigger button isn't pressed.Is there a solution please
Rowenta Press and Sew Iron w/Teflon soleplate: Dial to set temperature hard to turn for steam. Iron gets too hot when set for steam, fabric burns.
I have a Polti Vaporetto 910 steam cleaner with a iron attachment. Now the problem is the iron gets hot but no steam comes out. Please help
... Polti Vaporetto 2400 Canister Steam Vacuum
We bought a Philips Intellicare 8030 ironinng system in 2005. Two days ago water from the plastic water container does not go inside bigger water tank where we think the water gets heated up. When the heating tank is empty there is no steam that comes out of the iron. Also, there is water dripping off profusely from under the iron where the steam normally comes out. Can you please advise how we should remedy this problem Please advise which service centre in Sydney, Australia would we be able to
... Philips Vacuums
Breville iron, BIR300, purchased from Myer Frankston Friday, 18 March. Tthe steam selector dial will not move, being stuck permanently in the No Steam position. Is there some sort of release mechanism on a new iron?
Delux Steam Mop not producing steam. Motor comes on , but , no steam . This is the first time I have tried to use it. The instructions mention "Priming the mop like a steam iron" , but , there is no buttons etc. to push for priming.
After plugging in the steam mop, waiting for the 30 sec, pumping 12-15 times - no steam comes out. the tank is full and if i take off the bottom attachment the steam sprays everywhere. but the steam will not come out when mop head is on. thanks
Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head...Euro ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
Tefal turbo express 8360 steam generator iron has (visually) blocked steam outlets on the sole plate such that the steam does not come through. The steam is generating, just not getting through.
I have crofton steam mop model SM-102,takes little water,not enough steam
I am a Philips pensioner and purchased a "AZUR EXCEL PLUS 555" steam iron from them many years ago.There is now a fraying of the cable as it leaves the iron with resulting in arcing. There is a detachable backplate on this model which allows corded or cordless use but which cannot be accessed to allow for cable repair by the user. My qustion is can this be repaired or if not can I still purchase a replacement backplate complete with new cable as I this is a great iron and a credit to philips
Hello- My Europro EP965 is not shooting out the steam when I activate the switch on the handle. It does not work with the steam iron as well. The indicator lights work and it creating the steam, it is just not letting it out. I believe it is the valve inside, how do I get to it?
Fixya.com is a worthless website.\015\012Thank you ... Euro-Pro S3325 Handheld Steam Vacuum
DZ9080 IRON IS NOT VERY OLD, BUT HAS HEATING AND STEAMING PROBLEMS. IT MAY BE ALL HEATING RELATED! MY WIFE WILL SOMETIMES JUST LEAVE IT "ON" FOR TWO HOURS AND THEN IT WILL START STEAMING AGAIN. I CANNOT MAKE SENSE OF THE HEATING INDICATORS; SOMETIMES IT WILL STAY GREEN NO MATTER WHERE YOU SET THE DIAL ---- AND IT DOES NOT FEEL HOT! WHEN I TRIED IT AGAIN TODAY, THE SHOT-OF-STEAM WORKED FOR A WHILE (AND THE SPRAY WORKED), BUT THEN ALL IT WOULD DO IS DRIP WATER AT THE TIP WHEN TIPPED DOWNWARD.
I couldn't find any warranty information on this iron, but I suspect that the heating element either has a faulty connection or part of it has cracked, making contact at time, but poor contact at other times. The unit will have to be taken apart an ... Rowenta Vacuums
My Domotec handy steamer bought from Lakeland is not producing any steam. Have only used it a few times. makes a big noise and gets hot but no steam. I don't want to hold trigger too long in case something blows. In past steam has been quick to come out as soon as red light goes off. Any ideas?
... Domotec Vacuums
My Polti steam iron is not steaming
Have a Polti steam iron with sparate water tank. Need to replace the iron part but can't remove the screws from the bottom of the tank part! The seem to have 6-pointed star-shaped slots.
... Polti Vaporetto 2000R Vacuum
How do you take a Rainbow D4C filter off when it is rusted ? Can you take it off by removing the casing on the bottom ?
... Rainbow Technologies D4 Bagless Vacuum
My shark won't give off steam any more. I push down the handle and nothing happens. Then if I take of the head all the steams bursts out.
Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head...Euro-Pr ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
I just bought my edmark steam brush but didn't able to watch the guy selling it. Does the iron board really not coming hot? do I need to keep on pressing the steam button while using it? please somebody answer me/ thanks