Having problems with your Vacuums ?
I have been lucky to have been given a Huskystar 224 which I am delighted with but the person who had it before me has lost the
Overcast foot. Zipper foot. Blind hem foot.
Transparent buttonsewing/button hole foot.and the Automatic buttonhole foot.
Can you please tell me if I an able to buy these.
Oh yeah, the overcast, zipper, blind hem, and button foot are widely available - as are lots of other fun feet (such as rolled hemmers, roller, teflon, fringe, pintuck, cording, pearls/piping, felling, flower stitching, walking, freemotion quilting, you name it.) You just need to look for low shank attachments - that's what the 224 takes. Congrats on lucking out with such an amazing machine! As for the automatic buttonhole foot, I did see one on Amazon (search 'low shank buttonhole foot") that would probably work, but haven't tried that one so I don't know for sure. Happy sewing. :)
Repair Help & Product Troubleshooting for Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Hi I have been lucky to have been given a Huskystar 224 which I am delighted with but the person who had it before me has lost the Overcast foot. Zipper foot. Blind hem foot. Transparent buttonsewing/button hole foot.and the Automatic buttonhole foot. Can you please tell me if I an able to buy these. Kind Regards. Marjorie White.
Oh yeah, the overcast, zipper, blind hem, and button foot are widely available - as are lots of other fun feet (such as rolled hemmers, roller, teflon, fringe, pintuck, cording, pearls/piping, felling, flower stitching, walking, freemotion quilting, ... Vacuums
ShopVac pump The waterhose connection is up high. The only way to get the water up to the level of the hose is to continually hold down the on button due to the automatic shut off after it fills to a certain level. On the bottom of the filter there is a hole. I am thinking there should be a small hose of some sort to put into that hole that would then lead up to the level of the water hose. Concept makes sense to me. But in the meantime, good old duct tape seems to have done the trick. Not exact
Hey thats great whatever works its what makes america great ... Shop Vac 584-06-00 Canister Wet/Dry Vacuum
Automatic pump I understand the concept. What is wierd is the place to hook up the waterhose is up high and on the outside of the Shopvac itself. Is there another spot to actually hook up the hose inside the shopvac? I can't locate my manual. I do see a hole in the bottom of the filter but there is not an actual place to screw something in there? Im I just being stupid?
Well that does sound strange but in theory if you hook up the water hose even up high when the water fills the reservoir it should run out while your vacuuming give it a shot and when you wet vac yo ... Shop Vac 584-06-00 Canister Wet/Dry Vacuum
Automatic height adjust for Eureka 4700A ''Maxima'' doesn't work
... Eureka 4700A Maxima Bagless Upright Vacuum
I noticed the Roomba's brushes were not sweeping, or turning so they could sweep. There was a new sound coming from the machine, the sound of grinding nylon! Upon inspection, I determined the problem to be a heat melted gear support hole. The hole was no longer round but oblong. You could see a ridge of plastic around this hole. So melting I believe was the culprit. The gear that uses that hole was then able to tilt to one side, thereby allowing the gear to disengage from the drive train. I
Be sure to keep your brush bearings clean. If they get clogged, the brushes don't turn and the drive sockets can get damaged. ... Vacuums
The automatic drain hose is hooked up to the back of the unit, but when the bucket is full, the automatic pump does not work. The automatic pump should come on and empty the bucket, but it does not come on unless the water is siphoned manually through the tube. Then the pump come on and empties the bucket. I have reattached the tube and still had to manually siphon the water through the tube. Any suggestions?
Any automatic pumps operate off a swith that is turned on when the water rises. They normally have some type of ball lift, that will raise the switch when water is high and then drops with the water and shuts the pumps off. It sounds like yours is ... Vacuums
My DC 17 is plugged. I can see through the small hole in the top blue "flower shaped" that the holes at the top of the canister are plugged with hair & dirt. I cannot see anyway to get to these small round holes. Is there a way to remove the top blue "flower shaped" piece? I have removed the inner cone from the clear canister but still cannot get up underneath.
Please kindly follow the steps below to clean your vaccum cleaner,1.) Remove the clear plastic handle. You\015\012will have to take out two screws and then unclip from the from the\015\012front. It's stiff, I gently used a flat head screw drive ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
I have a Janome DC2007LE sewing machine. I am trying to do a regular buttonhole. I have the correct foot on and the buttonhole lever down inbetween the gap. I also have my button in the back to make the correct size buttonhole. When I start to sew it will make the front bartack and then only a few stitches into the left row. Then it beeps three times quickly and shows bL in the screen. I can't find what that means. and don't know what I'm doing wrong. It is doing this with both square an
My Janome MC 7000 has an auto buttonhole attachment that doesn't work so i want to use a sliding buttonhole attachment but have never used it. can someone tell me how ?
I've recently bought a hitachi HDR505 & haven't had a problem using it with an indoor ariel other than the fact in bad weather conditions there have been problems with the signals. So I tried to attach the ariel wire that connects from a box in the corner of my living room which connects to the outdoor ariel but cannot connect it into the 'ariel in' compartment on the box as it does not fit into that hole but does fit into the 'ariel out' hole. Please could I get help with a solution asap as I w
... Hitachi Vacuums
It leaks the nozzle at the bottom jam and burnt around the hole ,can this grey part be replaced or toss the hole thing out
\012\012\012Hi,Here\012is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it\012may not be getting steam to the head... ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
My plunger (bought in Chile) has 1. a metal filter, 2. a convex (not flat) metal disc with central hole for rod, 3.a metal disc with holes of two different sizes in circles radiating from the centre 4. plunger rod with screw and 5. a spirally coiled wire forming a circle. I cannot figure how to fit these especially the coiled wire. Help appreciated. Thanks
Place the coil in the hole and turn untill reach the desired height. ... Vacuums
Carpet attachment has two little holes just below where it snaps into place on the wand -- the airs going out those holes and not getting to the attachment so there's no suction
There is a small brush attachment that goes in there, you don't need it. Just tape up the holes. ... Kenmore Magic Blue 24195 Bagged Canister Vacuum
My vacuum cleaner works, all but the "foot". It turns off automatically and the light comes on telling me to "check brushroll". I've done this and removed all hair, strings, etc. It still turns off automatically, while the main vacuum and hose remain on. What else can I do?
Please post back with a brand and advise more info, however , I assume this is a canister vac with hose and `power head``. Often a power head brush roll will build up hair and thread which travels and winds up at the end of the brush wher ... Vacuums
Change Belt on Sebo Automatic X1 - Sebo Automatic X1 Bagged Upright Vacuum
OK, here goes... NOTE - any use of the words LEFT and RIGHT assume that you are looking from the FRONT of the machine. NOTE ALSO - the machine has two toothed belts, it makes sense to change both while you're at ... Sebo Automatic X1 Bagged Upright Vacuum
Hello, I have a Dyson DC17 that is not working properly. I emptied out the canister to find the tiny holes clogged on the cyclone part of the vacuum. How can I unclog those holes? Thanks!
I had this problem. Part of the clyclone is hard plastic and part is softer - where the holes are. Basically, I removed the rubber gasket at the bottom and kept beating on it - thumpig the hard plastic on a hard surface and then banging the softer ... Vacuums
My wind tunnel had a lot of dog hair at the intake hole from my renter that used it. I was able to remove it, but is it possible there is hair up inside beyond the hole & how would I remove it? it is not picking up dog hair .
I have an upright Dyson Cyclonic. Because I have dogs, I also have a Miele Pull-along. I use the cyclonic for fine dust after picking up the hairs with the Miele. Much quicker in the long run. Otherwise ... Hoover U5453-900 WindTunnel Supreme Bagged Upright Vacuum
Hi. I have an older fein multimaster msxe 636 II. The blades have round bolt holes. The new models have the star type holes. Can I use the star type blades since they are more available?
With respect to the above "answer", this tool has NO locking lever! It uses only a set screw to hold blades in place. It so happens that newer "star" mounting blades will fit into this tool easily, One must center the blade so the fingers of the s ... Fein Multimaster Rs - Msxe 636 - 2 Rs
My shop vac blows and doesn't ****! I put the hose on either hole and it blows dirt all in my house. I'm trying to vacuum. I can't find a switch to change it from blowing to sucking and if I put the hose in either hole it just blows.
... Eureka 2812 Wet/Dry Vacuum
My Kirby shampooer - G4 - hardly used any water from the tank and no suds at all. Pet hair did blow out of the small slotted holes in the tray as I moved the shampooer back and forth, but the carpet was basically dry. I did vacuum before shampooing, so the brush part seemed to work great during shampooing, but no water! The small screen was stuck in the crook of the hose that attached to the tank so I did get that out and put it on the small hole on the tank, but it didn't make any difference. I
Few things:Make sure the sponge and the valve under the sponge (water tank) is clean.Make sure you follow the instructions (f you do not have the manual you can find one ... Kirby Ultimate G Bagged Upright Vacuum
The soap dispenser on my 2X is not dispensing. I wrote with this initial problem and received a reply. We did everything recommended to find a clog. To begin with, we poked holes thru the little holes on the underside with a toothpick. Next we took the machine all apart as directed and cleaned out anything that had accumulated (such as pet hair). Eventually we emptied out the soap dispenser, filled it with a hot salt water solution and let it sit for 10 min. I ran three tanks of hot water
Hello,The solution to your problem is already solved, since your soap dispenser is still under warrant,What i will suggest is that you contact the company that supply you this product and explain everything to them, it is most ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
Is there supposed to be a pin size hole in cap of shark steamer?
Automatic "shut off" not turning off
Check the filter in the tank, if a dual V model you will have a screen, if not a dual V move the foam filter down about 1/4" to help.The lid on either model needs to be securely in place, as well as locking the left and right latches. On the Dual V m ... Hoover Steam Vac Dual V w/ SpinScrub Vacuum
Dirty water blowing out of hole in top of unit... help!!!
... Shop Vac 401-04-62 Original Wet/Dry Vacuum
Sebo Automatic X1 cleaner, toothed belt replacement
OK, here goes... (there may be more detail here than you need, but it's a copy of a solution I wrote for someone else) NOTE - any use of the words LEFT and RIGHT assume that you are looking from the REAR of the machine. \015\0 ... Sebo Automatic X1 Bagged Upright Vacuum