Having problems with your Vacuums ?
How do I descale my B77 Keurig coffeemaker????? It is not brewing.
The window shows descale and it is not brewing.
Repair Help & Product Troubleshooting for Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
How do I descale my B77 Keurig coffeemaker????? It is not brewing. The window shows descale and it is not brewing.
My Oregon Scientific BAR888 has 5 windows, 1. temperature, 2. humidity, 3. mb/hPa or inHg (switch at the back), 4. bars showing pressure changes over 24 hours, and 5. time/date. Window 3 gives an option to set something between 0 and 2500. Oregon say they only have one set of instructions for the BAR888 but they do not match my instrument as there is nothing included for my window 3. Trouble is I don't know what the 0 to 2500 relates to and therefore don't know what to set it at.(My model does n
Keurig b200 problem; When brewing with cup in unit water will pass into cup and it seems when k cup is full the grinds puch up through the top and water overflows. i pulled out the k cup holder and cleaned so their is nothing that is obstructed included the piercing pin. brewed [product does come through but does not seem to allow it to come through fast enough or if it supposed to be pressurized it is losing its seal on the top of the k cup
My Bosch Tassimo T20 will not brew properly. The water flows very slow and does not run a full cycle. The descale light is not on, but I ran a descale program anyways. The cycle took over an hour vs. the 20 min it should take.....Help!
... Bosch Vacuums
I have a Platinum B70 Cofee maker bought from Costco in June of 2010. I have set the on time, the off time, the temperature (192) and the cup size. All went well until today. Now the machine will not accept cup size. It goes to the max only, and it will NOT brew coffee, even though the window says "Ready to Brew".
Take it back as its under warrenty ,i think it may have a problem with the electronics which could be caused by brown out or a voltage spike ,either way its no good unless the computorised panel works ,my best advice is to buy a small coffee perculat ... Vacuums
No suction Hello - any help with this would be much appreciated! I just changed the bag and filters. The machine runs, seems normal, but there is no suction. There is no blockage of the hose, as indicated by the fact that that little viewer window above where the hose connects to the unit is not showing the red portion that it shows when there is something blocking the hose (god, this is hard to describe!). If I disconnect the hose and put my hand over the hole, I feel some suction. But
Well, it actually sounds like there is a blockage. Try removing your hose and dropping something through it, like a quqrter. If it comes through, no clog. If it is clogged, I believe that machine has a blower on the upper part of the cleaner (mayb ... Miele S514 Solaris Electro Plus Vacuum
I have a 4 showing on the screen of model 48465C, cannot remove it is not for the number of hours to brew, however only brews 4 cups of coffee, even though I have push the button to remove is still there.
Well... to start.... you are on the vacuum area.... can not help here!!!! ... Vacuums
My Keurig pauses for about 3 min. befor it brews. Also , when i press the button for the largest serving, it only gives the smallest. It takes about 6 min. to fill a large mug because of the small amount of water and the delay in brewing. When I use the basket with my own coffee, only water comes out. What can I do? Mary Jo Greaver
Our Keurig b140 is saying needs descaling, how do I do this?
I need the instruction manual for my Bunn Velocity Brew NHB 10-cup coffeemaker.
Here you go. Try this address:\015\012\015\012http://www.manualsonline.com/ex/mfg/headline/m/bunn/d/coffeemaker/type ... Vacuums
B77 Keurig coffee maker won't dispense coffee if k cup is in holder. Help?
I had the same problem with my Keurig coffee maker. The needle is clean, and no deposits. Above the needle is a check valve. This is a simple fix. Open the K-cup arm and look up, in front of the needle housing is two silverish screws. Remove them and ... Vacuums
We need step by step instructions on how to descale my Cuisinart Keurig ss 700? thank you very much, Anne Orleans
My keurig coffee machine makes noise like it is brewing, but water just drips out. De scale reminder is on, but with no water coming out the vinegar is sitting in there and not doing much- a few drips coming out with each cycle. this will take for ever to get through the entire container of vinegar -should I keep trying and see if it fixes the problem??
I have a B60 Special edition Keurig. I turned the power on and the "not ready" indicator just never goes away. Consequently when I insert the k-cup and pull the lever down to activate, none of the lights flash so I cannot select or brew. The machine is out of warfranty - but it is only 2 years old. Surely I should get more mileage out of it. I use Britta filtered water in it...
Hello pat.... your keurig probably just needs some maintenance done on it. here is the manual ... Vacuums
My keurig says brewing but it just very slowly drips...not sure it would ever make a full cup.
The model BVSTCJ coffe maker we have had for only 4 months won't brew when you push the brew now button - it immediately beeps five times as if it was just finished brewing. The filter basket and decanter are in their proper positions. Where is the level switch or whatever tells the unit that brewing is complete ie water reservoir is emty?
Rather than try to repair it or look into it, call the dealer or take it back to him as you will invalidate your warranty if you do anything to the unit, and that is not worth it. Let the dealer worry about it. ... Vacuums
When I set my sunbeam 3331-33 coffee machine to just brew, I can hear a click but it doesn't **** up the water to brew. I have not tried the grind and brew position to see if it will brew... any suggestions on what I can do? Everything is in properly (the lid is closed properly, the carafe is on properly)... Thanks.
... Sunbeam Vacuums
My CJX Series decided not to brew! I checked the manual's troubleshooting, (The coffee is not brewing) everything is correct! The unit has power and the light comes on, will not start brewing cycle.
Heating elements in coffee makers have an internal thermal protection device to locate it access the bottom cover find the wires leading to the element you will find on one of the wires a silver bullet shaped device this is the culprit, you can check ... Vacuums
Went to turn it on after not using for several weeks and it states not ready to brew like usual but after about four minutes it just turns off. Wont let us brew a cup or access the menu even to choose size of cup or anything. It sounds like it's sucking up water to make cup and pokes hole in the coffee but nothing more than that. It is almost brand new
You have posted the fault in the wrong column with no instruction of the make/model.\012Assuming it to be new , Is it passed the warranty period before we take a look ,?\012Just lave it on for sometime and see if there is any change. per ... Vacuums
MY SANSUI SSP WEIGHING SCALE GETS OVER LOADED WITH MORE THAN 90 GRAMS. INSTEAD OF SHOWING 0.23GMS IT SHOWS 2.3. ITS MAXIMUM CAPACITY IS 10 KGS. I HAVE LOST THE USER MANUAL. AND I DONT KNOW HOW TO CHANGE ITS PROGRAM.
I NEED THE WINDOW FAN (BORG WINDOW FAN MODEL #BORGW2100R-U INSTRUCTION BOOKLET.
Our Krups km 506 has slowed brewing down to a crawl taking 20+ minutes to brew a pot and essentially steaming off 35% of the water. Is there something that needs cleaned? we have tried running vinegar through it but to no help.
I have the hamilton beach espresso maker, 40715 and I've had it since this past christmas. The past few times I've used it, it takes a long time for the espresso to brew, and now it's barely brewing just a few drops every few seconds. I've tried running water through it and cleaning all of the pieces. It still isn't working properly.
I have a signature 2000 ac window unit (10,000 BTU). Recently, water begin to slowly drip from the bottom right of the unit. I heard it hitting my floor. I took the front panel off and saw water build up. The unit is mounted in the window perfectly. How do I remove the water? I live on the 2nd story of my apartment building.
MY casio FX 100W is showing a incomplete display.But this is not a half digit problem.It shows full display when kept in warm place (while keeeping it on TV top).