Having problems with your Vacuums ?

How do you setup the BellSouth 1188 answer machine? I can't get it to work properly. Please send me detailed instructions. Thank you.


Answers :

Here are the instructions for how to set up the machine... please let me know if you need more information, just reply to my answer here:

To set the time, press and hold the time/code button for 2 seconds. You will hear "TO SET CODE PRESS TIME AND CODE BUTTON."
Release the time/code button.
Press the 2 way/m button once. You will hear "SET DAY AND TIME, SUNDAY"
Press the > button until you hear the correct day.
Press the time/code button once. You will hear "TWELVE"
Press the > button until you hear the correct hour.
Press the time/code button once. You will hear "OH".
Press the > button until you hear the correct minutes.
Press the time/code button once. You will hear "PM".
Press the > button if you need to change to AM.
Press the time/code button once and you will hear the complete time and day setting.

To\015\012 record an outgoing message, press and hold the ogm button. Release the \015\012ogm button and start to record after you hear "PLEASE RECORD AFTER THE \015\012TONE" followed by a beep tone. When finished, press the ogm button.

Make sure you put a battery in the answering machine so you don't lose these settings if the power goes out!

Thanks,
Tim
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do you setup the BellSouth 1188 answer machine? I can't get it to work properly. Please send me detailed instructions. Thank you.


Here are the instructions for how to set up the machine... please let me know if you need more information, just reply to my answer here:To set the time, press and hold the time/code button for 2 seconds. You will hear "TO SET CODE ... Vacuums

Turbine Hi I found out through your site that my turbin is bad on my steam vac and I found some information as well on how to disasemble the steam vac to get to the turbine but still was wondering if there were some more detailed instructions on how to remove the turbin. I am a sigle mom and doing the work on the steam vac myself and need a little more detailed instructions. Please help asap and have a bless day.


There are some screws on the bottom that have to come out so you can remove the top housing. Take the brush block out, there are 2 screws above where it sits. The turbine sits near the front, and in the mid section, 2 screws on the front of it and 2 ... Hoover F7220900 SteamVac V2 Upright Vacuum

I have a kenmore vacuum cleaner model # 116.23612. When the hose is attached to the canister it runs, but if you remove the head to just use the hose the unit stops working. Is the motor dead or is there some type of reset or fuse. Could you please tell me how to test this. If so could you please send me instructions on how to replace the motor. Thank you in advance for your help, Tony


... Kenmore Vacuums

New Salter Analyser Scale 9149EF. No instructions in the box. Have inserted batteries and both gadgets show life, but neither functions properly. Have looked for instructions on the web - no luck Very frustrating, and spoils Salter's reputation. Please help. Thank you


... Vacuums

I have a tungsten timer TM-012 that suddenly quit working. I want to reset it but can't find my instructions. Can I get a copy of the instructions? Thanks.


... Vacuums

I have a Singer 2259 sewing machine which has an automatic needle threader. There is a diagram in the instruction manual of how to use this threader, but I can't seem to follow it properly and can't get it to work. Are there any clearer diagrams you could point me to, or clearer instructions? I'd appreciate your help.


Singer 2259 doesnot have automatic needle threader ... Singer Vacuums

Hi recently purchased Hoover TFC3185 Bagless cylinder vacuum cleaner from a company on ebay, but there were no instructions with it. Please would you send me instructions, My email address is [email protected], thank you


Just go to the Hoover website & you'll be able to access the owner's manual & other information. You should also contact the comapny that sold it to you & see if they misplaced the manual & instructions before sending it to you. It' ... Hoover Vacuums

I have model RGR126 Wireless Rain Monitor. All of a sudden, it has quit registering outside temperature. I changed the battery in the outside sensor and even pushed the reset button, but nothing I have done is fixing the problem. Please help! I really miss getting the temperature outside before I get dressed for work. Thanks.


... Vacuums

I have a Craftsman wet dry vac with blower capability (22 L). While I was using it to **** up water, the water came out of the blower hose. Now I can't get it to work as a vacuum. What can I do to fix this problem? Is there a toggle switch somewhere that allows me to choose vacuum or blower? Also, will the vacuum still work without the filter nut attached to the plate? Please let me know at your earliest convenience. Thank you.


... Craftsman Vacuums

Good morning, I have a Krups Variomix 3000 Premium, don't have a user manual, and haven't used it yet as I can't get the blender to lock into place. The user manual downloads that are on-line say the link has been removed. Please can you help me get the blender to work? Thank you, Marian


This is listed under vacuum cleaners as the repair catagory, is that what it is? ... Vacuums

I have an Argos electric multi timer (MK9 2NW. Type: TS-EE8) but as I haven't used it for years I've lost the instructions< on reading the reviews on this product it seems that they don't always work &/or need charging, I've had mine on charge for a few days but can't get a reading so I don't know if its broke. I've searched the net but can't find the instructions, can anyone advice? Thanks, David.


I have 2 of them and have the same problem! I guess you get what you pay for! ... Vacuums

Instructions there is a link for the manual but it doesn't work I am tryingh to get instructions for the black and decker steambuster. thanks elaine [email protected]


Here is linkhttp://servicenet.blackanddecker.com/Products/Detail?productNumber=SV1000 ... Black & Decker SV1000-4 SteamBuster Vacuum

I purchased a bissell model #6583 and it did not have a owners manuel and i am confuded about the filter instalation can you show me where to get this on the internet for free since it should have been in the box upon my purchase,(and was not there!) I feel I have already paid for it once,and some what cheated, or at least e-mail me the instruction part of proper filter use. Thanks, Shirley


Go to http://www.bissell.com/powerforce-bagless-vacuum/. On the right side of the page, under "Downloadable Documents", click on "User Guide - English". ... Bissell Vacuums

My German friend gave me a Quelle PRIVILEG super -nutzstich-1511 Nahmaschine 1531, but the instruction booklet is in German. Can you tell me please how I can get a copy in English. thanks.


... Vacuums

My Dyson DC17 has lost suction on the wand and is not picking up dirt as it should. I have taken the small part at bottom of the machine off to see if there is a blockage--none that I can see. The flexible tube on wand is very tight and won't extend very much. Dyson sent me a new cyclonic part in April but the machine still doesn't seem to be working properly. My serial number is 260-us-d11545. Is there somewhere I can take my Dyson to get it fixed. I'm very frustrated with it. Thank you.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My shark steam mop is not working properly cannot find manual what can i do i am in the older generation and not technical mop head is getting too wet or not wet at all. steam not even thanks


Google is your best friend. EVER ! http://www.sharkclean.com/cgi-bin/livew/site.w?loc ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

A friend gave me her Shark cordless speed vac. I do not have the manual. Could you please send me the operating instructions. - how to use and empty. The model is SV749C. Thank you, Tia


... Vacuums

With my K6 Industrial Singer sewing machine the top thread seems to be too tight. The bottom thread is looping too much on the top of the fabric. The timming is ok. I have checked and rechecked that I have threaded it correctly. It was working great the other day. Please help as we are live out on a property and too far out to get someone out to look at it. Thanks Tania Sorry no category for sewing machines on your list


Hello there, loosen your top thread tension,if it looping on top of the material the tension is way too tight, you will also find changing the thread size to smaller thread, the top tension will also reduce,depending on application a good size thread ... Singer Vacuums

HOOVER F5906-900 I am having trouble figuring out where the inner hoses go, A friend barroed it and took them off to clean them and did not put them back properly. Would you please send me Scamatics to see where exactly these go so I can shampoo my carpets before I go crazy. Thank You Misty Winslow [email protected]


Here is a break down, you may be to trace the lines:\015\012\015\012 ... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

Dear friend how ar you we ar trading company from yemen we hope to start deal with you for long time now we looking for the vacuum powder loader And in the use of suction dust And grain and cement factories and other so I hope to send all the details and Asanaav you have available, sizes and prices, and we will respond to you as soon as Wait for the reply and to hear from you soon Please accept my sincere greetings and appreciation thanks regards hamood ahmed [email protected] or yahoo.co


... Fantom Vacums Lighting Canister Vacuum

I have a Euro -Pro select steam cleaner with soap dispenser and the off /on switch is not working properly. It doen't shut off once the steam is built up. Can I order a new hose so I can get a new switch? Thank you, Diane Prey


... Euro-Pro Vacuums

Hi - I've lost my instruction booklet for my Cookworks breadmaker (Ref numbers: 422/7315(D) P/0749027), do you know where I can get one please? Many Thanks


... Vacuums

I own a Miele S5210 vacuum cleaner which has stopped working. It looks like the dust bag wasn't fitted properly and the machine is very dirty and the filters are completely clogged. I've cleaned it up as best I can and have replaced the filters but it still won't operate. How can I get inside the casing to clean the inner motor compartment? Thanks Tom


... Vacuums

Could you please send to me the crevice tool for this vacuum and the instructions manuel for this model: Sanyo SCX1000P Powerhead Canister V Denis Lebel Norton Country store RT 114 Norton VT USA 05907 Thanks so much Denis


As far as the Manual is concerned it can be downloaded from: Sanyo SCX1000P Manual ... Vacuums

Just had a Bissell Quick steamer Plus model#1950-3 J02117 given to me. I need the instuctions on how to use it, I have no manuel for it. please send me the instructions & a video how to use, thank you


Follow the link provided for copy of User's Guide.\015\012http://www.bissell.com/Sear ... Bissell 1950-3 Quicksteamer Plus Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1378 seconds