Having problems with your Vacuums ?

I have a janome sewing machine 432S, sounds like it needs to be oiled, but I don't know where, and it keeps breaking my thread at the needle

Answers :

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a janome sewing machine 432S, sounds like it needs to be oiled, but I don't know where, and it keeps breaking my thread at the needle

... Vacuums

I have the brother Ls-2000 sewing machine i threaded the top as well as the bobbin but when i try to sew the thread gets stuck and it bunches up and tangles in the bobbin. also the little bit that did sew was tight stitches on one side of the fabric but very loose on the other side I followed the instruction and it keeps happening i need help i dont know how to fix it please help me

Adjust your tension.You probably did not wind your bobbin properly as well.Make sure you oil your machine every month or so and make sure your bobbin is seated properly before you sew.\012\012Go slower with the pressure foot speed and use the r ... Vacuums

I bought a used Nakajima 181L-2 sewing machine and I need a manual. I can't seem to get the tension right and it keeps breaking the thread when I try to sew heavier stuff like my horse blankets.

... Vacuums

The needle keeps breaking on my Janome J3-18 sewing machiene and the thread tension seems too tight. However the tension is set at 5 and it is standard thread and I'm using standard fabric. What's going wrong?

... Vacuums

I need to know how to time a brother XR 31 sewing machine! The needle keeps hitting the thing that holds the bobbin. by about a 14"

This is a job for a professional sewing machine repairman. Any retiming must be caliberated accurately in order to sew properly.\012Unless you have the proper timing figures and calibrating tools and know how, I would take it to a professional ... Vacuums

I dont know how to thread, operate, or even handle any kind of sewing machine, and i need to find out how to do just the basics to do so

Follow the link below. It should show the basics on how to operate a sewing machine.http://sewing.about.com/od/sewingmachineinde ... Vacuums

I had a toyota rs2000 series sewing machine given, model se14, and it came without a manual, and i dont know how to start threading it up. i need diagrams to show me how please

Try this site:-\012\012ewingonline.co.uk/instructions/toyotars2000 ... Vacuums

We have a vogue stitch janome model 539 115v sewing machine. we were trying to sew but, the thread is not picking up from the bobbin. the thread keeps breaking and we are unsure what tension setting should be used for cotton cloting. please help. thanks! tom staron

... Vacuums

Hei, I have sewing machine Brother NV500D and got technical problem need to be service/repair. I'm now in Malaysia and don't have techinical/repair service for sewing machine NV500D. This is overseas model. In sewing machine screen display 'F04'. The problem automatic needle not function and part missing. I dont no how to fix this. Can't i got the instruction manual service picture if i can't fix own. please help me. thank you.

... Vacuums

While using the pin stitch , the machine has started skipping stitches, knocking loudly, the top thread is breaking, sometimes thread knots up on the underneath side. I have cleaned bobbin area, changed needle and bobbin, using quality thread, the last time I used machine worked fine, yesterday when I started sewing I had this mess HELP!

Hi,Please go through the link given bellow to have the resolution to your problem...\015\012http://sewing.about. ... Vacuums

The last time I sewed with my Necchi the tension was fine. Today when I threaded my needle, the thread felt tight in the upper tension dial. I tried re-threading the machine several times, but it didn't help. Now the parts of the tension dial are all loose and wobbbly and I have no upper tension. Doesn't matter what the dial is set on. The tension dial appears to be broken, but I don't know how that could have happend since I store it in a case.

I found this thread (no pun intended):\015\012\015\012http://www.fixya.com/support/t2902978-need_replace_upper_tension_dial\015\012 ... Vacuums

What size needle and what type of thread would you need for sewing marine vinyl if using a pfaff 130 sewing machine?

I had a friend who used to use nylon thread. He had been using a number 16 needle and heavy duty \015\012thread(top spool only, reg. thread in bobbin) On the first vinyl, \015\012it worked well. The second vinyl was causing the bobbin thread to " ... Vacuums

I have a janome BCC-30 sewing machine and the upper thread has started to break and fly out of the needle while I am sewing. The problem continues even when I change the tension dial.

... Vacuums

I bought a stitch & go sewing machine, the instructions for threading the machine are hard to read could you please explain or email a larger versin , specifically #3, 4, and 5 , i know i'm doing something wrong thread is breaking

... Vacuums

Janome sewing machine model 654. Wife needs to know how to string the thread for sewing. we have lost the owners manual. If anyone can help with a diagram.

... Vacuums

I have an old Rex 26-188 leather sewing machine, is it possible to find a manual for this machine. The serial number is T 704937. This is a functioning machine but I need to know how to thread it. Thank you. Lois White

... Vacuums

I have a brother ls 590 sewing machine, and i cant find the right tenchion for thin stretch fabrics. my fabric keeps getting caught underneath the needle where the bottom thread comes out. can you give me some tips, and tell me why this is happining.

... Vacuums

Thread at needle breaks when sewing. - Vacuums

Most common problem is the quality of the thread, most sewing machines require quality thread or else it breaks especially if the material is thick or hard ... Vacuums

I bought a Tacsew T8700 High Speed Stright Stitch and I should have paid more attention to the 'High Speed'! The motor that came with this industrial machine is a Tacsew Clutch Motor model: RM1878-1H. It is way too fast when starting out and usually breaks the thread. The local company I bought it from told me there was not a user manual for the machine or the motor :P. I've finally gottin the tensions adjudsted but still need to be able to start sewing at a slower speed. Any advice out the

If you are just starting off sewing and don't have good foot control change the motor to a d/c motor they are about $120 and you can turn the speed of the motor up or down ... Vacuums

Have a White Jeans Machine, Heavy Duty, XL1760, one step buttonhole. Don't have a manuel and don't know how to thread, straight stitch. Its on A which it says zig zag, or straight. Also told it breaks needles.

... Vacuums

I need to know how to thread a perfection sewing machine because I've lost the instructions.

Hi, I have a few questions:1- Your question is listed as a "Vacuums Problem". is that correct?\015\012\011\011 \015\012\011 \015\012\011 \015\012\015\012\011\011 \015\0122- Your writing is broken-up, I think that you ... Vacuums

My machine will not sew, the top thread keeps getting choped off by the needle. Model XL 2230

Try lowering the tension and another needle. ... Vacuums

How do I thread a Pfaff 1522 sewing machine? Also need to know how to snap bobbin into place. Thank you

... Vacuums

I need to know how to thread a 385 15551 sewing machine. I have lost the manual and can't find a bobbin or a place to put it if i had one.

... Vacuums

I have a Brother pacesetter xl 721 and i dont know how to thread it. I need a diagram.

... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1106 seconds