Having problems with your Vacuums ?

Im getting a "H20" error


Answers :

You can get the manual on the link below page 14 will tell you what is wrong.
\015\012
\015\012http://www.mrsteam.com/uploadedFiles/PUR%20101289%20Rev%2013.2-10.pdf
\015\012
\015\012
jyackle5_17.jpg
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Im getting a "H20" error


You can get the manual on the link below page 14 will tell you what is wrong.\015\012\015\012http://www.mrsteam.com/uploadedFi ... Vacuums

My Janome Harmony 8100 will occasionally stop and give me a System Error #1 - I cannot find anything about this error. It is a computerized machine with 70 stiches and attachable embroidery hoop. I first started getting this error with the hoop and now get it when I am just sewing. As soon as the needle goes down to the bobbin, I get the error. The machine freezes and the only way to get rid of the error is to turn the machine off. Sometimes I can get the machine going again, but now it wil


... Vacuums

Pfaff 2140 Getting an error code that reads: error in read parameters, and if this error occurs several times contact your dealer. -then you have to hold a crosshair on the screen push the scissor trim button and reverse button to get back to the main menu. I just had it in for service a month or so ago...?so there should not be any major issues, what does this error code refer to?


... Vacuums

I kept getting an error message from i-Roomba on charging .. Charging Error 3. I just bought a new battery and it has the same error message.


... Roomba Robotic Floor Bagless Vacuum

I have a Milan scientific calculator and i am trying to calculate standard deviation. The answer that i get for sum of values and no of data are negative and when i try to calculate standard deviation i get a ma error message. Please help me. Thank you


... Vacuums

I have a grafter safe model no AA/R06/1.5V - GT24 batch number 0171-2C and have lost the instructions and the key. I have put in a wrong pin number and now I am getting the message 'error' flashing across the safe and don't know how to get into the sate.


... Vacuums

My Roomba 770 will not start. When I push "clean," "spot," or "dock," I get one beep. There is no voice error code like with other errors. I am still able to drive it around manually with the remote c


The beep code means that it cannot verify all of its wheels are on the floor. Turn the unit upside down and make sure there is nothing stuck to the wheels or sticking between the wheels and chassis ... Vacuums

Hi I have a Vollrath vacuum packing machine the Model is Grande and is getting the error of ALL what is this ?


... Vacuums

Our carbon monoxide dectector model CO910, bought several years ago (10+) beeps every 30 seconds with an "err" message. All windows where it is are open. No one is feeling ill. Is it just an error on the detector and it is time to get a new one?


CO2 and Smoke detectors have an internal sensor that has a design life of 5 years from the date of manufacture. After the 5 years you start getting false alarms due to the sensor itself exceeding its average life span. On the combination CO2 and Sm ... Vacuums

Hoover dynamic 10+ steam washing machine h20 error


... Vacuums

Getting an H97 error code on a Panasonic micro wave, I believe I am having an inverter problem


Troubleshooting of Inverter Circuit (U) and MagnetronThis oven is programmed with a self diagnostics failure code system which will help for troubleshooting, H97, H98 and H99 are the provided failure magnetron and inverter circuit problem areas ... Vacuums

I want to get my XL-5000 singer sewing machine to work. It does not sew. The top thread will not pick up the bobbin thread for one thing and the other problem is that it gives me a error message saying incomplete threading.


Check if there is any thread in the bottom bobbin and next remove it and give it a good clean in its surrounding area.Oil surrounding mechanism carefully and manually push the top needle in and watch the bobbin spinning a see if it tried to pick the ... Vacuums

My H20 mop steamer is not working it gets hot but no steam coming out


See this ccauses and use the common sense God bless younspect your steam cleaner's belts for loss or damage. Damaged belts can \012cause the brushes to stop rolling or the spray mechanism to stop \012functioning. To fix a damaged pump or brush be ... Vacuums

Hi, My roomba said error 10- and I cleaned the side wheels, several times and get the sane error10 message. What else can I do? Kim


Roombas are notorious to do this kind of thing. The housing must be removed and the inner housing and internal parts inside must be air blown out with 5 PSI of air pressure.\015\012Dust will interfer with the capabilities of the vacuum ... iRobot Roomba 530 Robotic Vacuum

Trying to install my new singer futura ce250 i have downloaded the patch to get it to work with my computer now it gives me a error on the computer screen something with security


My guess is that you should uninstall the software re-install the file as administrator or with administrator privileges\012\012Unfortunately you do not give details of your operating system, XP or vista etc but in general right click on the in ... Vacuums

We get the error erH on our scale. The oxo site does not have any info.


... Vacuums

I have a iRobot Scooba Vacuum Received an error message to check brush. I cannot get into the tank. Lever will not release.


Press down on the silver tank saddle at the back of the robot. While putting pressure on the saddle, tap the release handle quickly, right at the edge. That should cause the tank to pop up. \015\012\015\012~Fembot ... iRobot Scooba 380 Robotic Vacuum

My Roomba 560 is making a clunking noise when it is on and it keeps stopping saying that I need to clean the brushes. I've thoroughly cleaned the brushes and I've cleaned lint from other small crevices but I'm still getting the error. Any suggestions?


I'm having the same problem with my 560 after a day of use. For me, it's caused by the little yellow spacer that's clipped onto each side of the bristly brush. When the brush assembly is closed, it wedges rather tightly next to that yellow spacer on ... iRobot Roomba 560 Robotic Vacuum

I keep getting errors on my roomba 560 telling me that I need to remove and clean the brushes. I reset it and it goes for about 2 minutes and beeps again (and the brushes look fine) What am I missing?!


Try also cleaning all the filters ... Vacuums

Dark rugs with white pattern. I constantly get a error 6. Move Roomba to a new location


... Roomba Robotic Floor Bagless Vacuum

I have an Electric Body Scale (QIE-2003B). I GET AN ERROR - ErrH, and cant use the scale.


... Vacuums

Roomba 550 keeps saying please remove and clean roomba's brushes. I have done so and keep getting error message.


Pull both brush rollers out.pull off funny looking yellow ends and clean out hair ect. ... iRobot Roomba 530 Robotic Vacuum

Roomba 530 Nine beep error. I took off the front bumper and cleaned it throughly. Looks like itmay have to do with poor infrared emitters as they dim over time with getting older.


Nine beeps mean optical sensor unit/bumper actuator failure. Here's a link for you. Hope it helps....http://www.protechrobotics.com/proddetail.php?prod=245435775 ... iRobot Roomba 530 Robotic Vacuum

I keep getting error 6 on my roomba - Roomba Vacuums


... Roomba Vacuums

Machine keeps telling me e6 error cant get it figured out why did what book said to correct it but still wont work


... Singer Futura CE-250
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0478 seconds