Having problems with your Vacuums ?

I purchased a Hoover Vacuum today Model U5180-910W. It has a telescoping handle which I cannot get it to go down. I followed the directions to the T. Any suggestions?

Answers :

Sometimes they get hook up from dust. Use a furniture spray wax and spray the moving parts and latch, then see if working it will break it loose. If this is less then a year old, then it is still under warranty, you can take it in for repair.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I purchased a Hoover Vacuum today Model U5180-910W. It has a telescoping handle which I cannot get it to go down. I followed the directions to the T. Any suggestions?

Sometimes they get hook up from dust. Use a furniture spray wax and spray the moving parts and latch, then see if working it will break it loose. If this is less then a year old, then it is still under warranty, you can take it in for repair. ... Vacuums

Just got a Polti Vaporetto 1020 from someone and cannot get it to work. One yellow light lit up and was on for a few minutes then turned off...and there is nothing...flip the switch on the handle, nothing...flipped other yellow button, nothing...any suggestions? or where I might get directions on how to use it? didn't come with manual. Many thanks. best, pat

... Polti Vaporetto 2400 Canister Steam Vacuum

Cannot get the Telescope Handle to disconnect when pull up

... Dyson DC07 Bagless Upright Cyclonic Vacuum

Cleaning I cannot get the cleaner to release solution on carpet. have lost manual. is there a trick to this? I have tried squeezing trigger handle to dispense solution with no luck. have followed instructions (2 capfuls cleaner, fill with hot water to fill line) on filling tank.

Either you have a pinched or clogged water line, or the rod in the handle is pushing down like it should. The drw back is Bissell has deemed this unit and its parts obsolete. So any parts are hard to find.\015\012\015\012 ... Bissell 1950-3 Quicksteamer Plus Vacuum

I just bought a used euro pro steam shark model ep903, has all parts but when I turned it on to use it water and steam poured out of the handle grip area. Am I not doing something right? The manual says to attach the brush directly to the hand grip but I can't use it without getting burned. Any suggestions would be greatly appreciated! Thanks!

... Euro-Pro Ultra Steam SharkTM II Hard Surface Steam Cleaner Vacuum

Polti Vaporetto I have a problem with my steam cleaner. Cannot get steam to come out, and the big valve at the top just keeps turning in both directions. So can't empty it. I have'nt got an instruction manual either as it was given to me. Any suggestions!!! Terena

Dear Terena \015\012\015\012Had the same problem with a polti vaporetto 1500 ( vtt 1500 ) after butchering the big valve on the top I realised that the problem was that there was a blockage in the black pipe that comes from the machine to ... Polti Vaporetto 2400 Canister Steam Vacuum

Telescopic handle I don't think I have the exact same vacuum, although mine is a fantom upright bagless. I can't get the telescopic handle to stay in place. It pulls out whenever I try to pull back the vacuum. Any tips would be helpful! Thank you

Sometimes the locking mechanism for the wand wears out, make sure u have it all the way in and look where it locks and see if it looks worn ... Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum

Sabco mop with telescoping handle: handle is jammed

... Vacuums

I have an Easy-Flo central vac unit. The handle on the electric hose has a switch on the handle. With the switch on ''O'' in the center, it's off. On the left, is the ''I'' position. The vacuum runs but the power brush doesn't. On the right is the ''II'' position. The switch won't flip that way. It feels stuck. It feels as if there is something underneath of it that won't let it push that direction. I have the switch out of the handle, but I can't seem to get the actual black casing around the

Switches are not usually designed to be dissembled.I would strongly suggest that you dont take the switch apart. you are better off getting a new one. then if you feel like it you can take the old switch apart and if it dosnt work you still hav ... Vacuums

I ordered a Bona mop with a telescoping handle, but I can't get the handle parts apart to extend it. It's been this way since it was sent to me and it won't budge.

... Bona MicroPlus Microfiber Hard Surface Mop, Pad and Pole, 60" Telescoping Handle

I am trying to change the coupler on a KitchenAid blender model number KSB560ER0. It is a recessed coupler and I cannot get it to unscrew in the clockwise direction no matter how hard we try.

... Vacuums

Belt broke I need to find out how to get in the vacuum to replace the belt but cannot figure it out. I do not have the owners manual for this Eurka The Boss Superlit bagless (402a) please e-mail me any directions if you know how to do it,thanks. [email protected]

How do i change the belt on my eureka the boss lite vacum ... Eureka Boss SuperLite Bagless Upright Vacuum, 405AVacuum

Electrolux oxygen plus 2100w telescopic tube is stuck. I wanted to extend it but the handle will not release and is stuck. Can you offer any suggestions?

I have a electrolux 2000 and my tube has a small tab that you push before it would let me release it. I had trouble getting it off as well. What I did was push the tab, Plasing one foot on the vaccume head holding it down while pulling up and twistin ... Electrolux Vacuums

How to get telescoping handle up? How to empty dust cup?

... Eureka Boss SuperLite Bagless Upright Vacuum, 405AVacuum

The metal tube (wand) has come out of my DC14 handle and I can't get it back in. Any suggestions?

See if this manual helps you:\015\012\015\012http://www.espares.co.uk/datastore/ProductManuals/350256.pdf ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My Infinity nv29 vacuum stopped working suddenly while vacuuming. I followed the directions in the manual and unplugged it and let it sit for over an hour and then tried plugging it in and turning it on. It still will not turn on. Any suggestions?

... Euro-Pro NV31 Infinity Vacuum

I have a Shark Euro Pro Model: SC717XH. Several of us have tried to remove the cap on top following the directions of pushing down while turning it counter clockwise. It is impossible to get off. Any ideas on what to do?

... Euro-Pro Steam Penguin Hard Surface Steam Cleaner Vacuum

How do I get bobbin in a Bernia artista165 I followed all directions that came with machine.

Hello : Check for manual here please : http://safemanuals.com/zearchres_3366.phpgood luck ... Vacuums

Want to clean shroud of DC07, have done it before, but this time (and following users manual directions) the bin release catch doesn't seem to be enough to get the clear bin off. It's so stuck together! Help?

... Dyson DC07 Bagless Upright Cyclonic Vacuum

GE on/off timer for a bathroom fan - switch has four wires Green - ground White - neutral Black - power Blue - lead My fan has two - white neutral and black lead I have tried every configuration and cannot get the fan to work. Any suggestions?

I would guess that the black wire on the timer is the power in and blue is the power out to the fan (hook it to the black wire going to the fan) The other colors are right. ... Vacuums

The cloth filter bag on my Kenmore Central vac has come off and no matter what I do I cannot get it to stay in/on. I have followed the instructions from the manual. Any tricks you can give me would be greatly appreciated

... Kenmore Vacuums

Bought a cyclonic unable to get the handle to telescope

Being new, take it back for a different one or take it in for warranty repair. ... Vacuums

The handle release pedal broke on my Eureka Smartvac. The spring is still in tact. I have a replacement pedal, but cannot figure out how to install it. Any suggestions?

... Eureka Smartvac 4870 Bagged Upright Vacuum

Cleaned the brush but could not get the central belt to hook back on by following manual directions


Hoover Model U8185-900 beater bar part keeps smoking and burning up We've replaced the part Hoover PCB Display Bridge U8172 three times and the vac beater bar works for about a minute then the part starts to smoke and burns out again. I've taken everything apart but cannot locate anything that would cause this part to burn up. I think if I did not disconnet immediately, he vac would catch my rug on fire. Help? I didn't send back the warranty card, so I can't get any help from Hoover. Any suggest

I'm not sure why this is happening. Perhaps if you would contact Hoover and explain the problem to them such that it appears that there is a safety issue with their product, they might be more cooperative. If that fails, I have had luck writing let ... Hoover U8185-900 Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0675 seconds