Having problems with your Vacuums ?

How do i put together my kirby carpet shampoo system?


Answers :

Vacuum thoroughly before shampooing for maximum cleaning. Then, remove the bag and the Power Nozzle to prepare for shampooing.\015\012Turn the Carpet Shampoo System Nozzle Belt Lifter to the right of the center position (fully clockwise) until the green arrows line up. \015\012a4bbc62.jpg\015\012\015\012Slide the slots on the side of the Carpet shampoo system over the outer shoulders of the Carpet Shampoo System Tray. \015\012 \015\012e14fe2e.jpg\015\012 \015\012\015\012While pushing up on the Belt with your finger, turn the Belt Lifter left (counter- clockwise looking at it from the front) until the red arrows line up. (The Belt Lifter Hook will catch and stretch the belt.) \015\012
\015\012fb4304c.jpg
\015\012Press the bottom Toe Touch Pedal all the way down to raise the front of the Kirby.
\015\012
\015\0120dd7df2.jpg
\015\012While sliding the carpet shampoo system Nozzle/Tray Assembly toward the Kirby and over the Motor shaft, connect the hooks on the bottom rear of the nozzle to the Attaching Bar.
\015\012
\015\0121c98cfa.jpg
\015\012
\015\012Push the nozzle up against the Kirby and turn the Accessory Lock to the
right (clockwise) to lock the nozzle in place. To engage the belt, turn the Belt Lifter
all the way to the right (clockwise) until the green arrows line up. Then lower the Headlight Hood

\015\012
\015\0122c42a04.jpg
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012
\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do i put together my kirby carpet shampoo system?


Vacuum thoroughly before shampooing for maximum cleaning. Then, remove the bag and the Power Nozzle to prepare for shampooing.\015\012Turn the Carpet Shampoo System Nozzle Belt Lifter to the right of the center positio ... Vacuums

Dont know how to put the shampoo system together on my kirby g6..


Http://reviews.ebay.com/KIRBY-CARPET-SHAMPOOER-INSTRUCTIONS-MANUAL-DIRECTIONS_W0QQugidZ1000000000459499 ... Kirby G6 Bagged Upright Vacuum

I have a kirby sentria and after I shampoo'd the carpets I put it back together to be a regular vacuum and now it wont turn on. Any ideas what could be wrong?


The only thing I can think of is the brush head is not on properly.If the head is not aligned right,then the saftey switch wont be activated.Otherwise,I'd say the saftey switch or power switch.Did you make sure not to run over the cord? ... Vacuums

It's been awhile since I have used my shampoo system on my Ultimate G series Kirby. Well, as instructed I took it apart and cleaned it. Now I can?t figure out where to put the ?screen cap? and ?sponge filter?. I have my manual in front of me and the only place it shows the filter and sponge (page 35 in the manual) is when it?s been taken apart to clean. It doesn?t show where to put it back. I don?t know what I would do without all the pictures in the Kirby manual. HELP! Thanx. Visual Kirby Vacuu


Hello,\015\012The littlew round screen goes in the hole where the hose attaches to the tank. The round foam filter goes up in the hole underneath the on/off valve for the foam. Here is a guide if you need any more help...\015\012\01 ... Kirby G6 Bagged Upright Vacuum

For the first time, I tried using my Kirby Sentria shampoo attachment. I've lost the manual but found instructions online for making the swap from regular vac to shampoo-er and got it all assembled. The foam laid down just fine, however, when I run the vac back over the foam to pick it up, there is not a stitch of water showing up in the tray. First I thought maybe it was bc I hadn't put that much of the foam/water onto the carpet, but 12 hours later, the carpet is still wet in spots. Clearly


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=638285\015\012Generic problem for all Vacuums\015\012For the first time, I\015\012Posted by MHicks on J ... Vacuums

Kirby Sentria I just got done usting the carpet shampoo system and now my Kirby wont start


When you replace the outer bag assembly, you have to make sure that it is turned clockwise untill it fully stops. There is a small switch on body of the Kirby that is only engaged when the bag assembly is installed correctly ... Kirby Ultimate G Bagged Upright Vacuum

Can I use Rug Doctor steam cleaner shampoo in my Ultimate G series Kirby carpet shampoo system?


The answer is no. This type of shampoo doesn't work as well in the Kirby. It should be dry foam shampoo only. ... Kirby Ultimate G Bagged Upright Vacuum

I have a kirby sentria vaccum carpet shampoo system and I cannot get the shampoo suction head to work! It comes on but the belt is not turning. I have tried taking it off and looking at the assembly but no luck. And I have tried turning the belt engage lever to off and on to see if it makes any diference.


I had the same problem at first but figured it out. Make sure before you put it on the vacuum itself, that the shampooing unit is completely together. The belt needs to be taunt like it would be when the brush is turning. Once you put it on and turn ... Vacuums

My Kirby shampooer - G4 - hardly used any water from the tank and no suds at all. Pet hair did blow out of the small slotted holes in the tray as I moved the shampooer back and forth, but the carpet was basically dry. I did vacuum before shampooing, so the brush part seemed to work great during shampooing, but no water! The small screen was stuck in the crook of the hose that attached to the tank so I did get that out and put it on the small hole on the tank, but it didn't make any difference. I


Few things:Make sure the sponge and the valve under the sponge (water tank) is clean.Make sure you follow the instructions (f you do not have the manual you can find one ... Kirby Ultimate G Bagged Upright Vacuum

I need an instruction manual for a kirby ultimate g carpet shampoo system. Where can I find it for free?


The Kirby site has an instruction video for attaching and using the shampooer. Check this and see if it's satisfactory.\015\012\015\012http://www.kirby. ... Kirby Ultimate G Bagged Upright Vacuum

We have the Kirby the Ultimate G series Shampoo series and need the manuel on how to put it together and how it works! Thank you!


Hi there,\012Get your manual from the below link -http://www.goodvac.com/Articles.asp?ID=153or http://reviews.ebay.com/KIRBY-CARPET-SHAMPOOER-INSTRUCTIONS-MANUAL-DIRECTIONS_W0QQugidZ100000000045949 ... Vacuums

I want to clean my carpet but not sure how to put the kirby together


... Kirby Vacuums

I neeed a video on how to use kirby for shampooing. how do i put it all together?


... Kirby Shampooer Shampoo Hose G3 Ultimate Diamond Vacuum

Carpet shampoo system


I KNOW THIS IS AN OLD POST BUT MANY PEOPLE MIGHT STILL FIND THESE ANSWERS USEFUL. I CAN ATTEST TO THE FACT THAT YOU NEED TO USE THE KIRBY SHAMPOO. I TRIED TO SAVE MONEY AND USE OTHER BRANDS BUT IT NEVER WORKED AND WOULD DISPENSE MOSTLY LIQUID IN ... Kirby G5 Bagged Upright Vacuum

Shampoo system for kirby sentria ultimate g


Yes, also make sure you have plenty of shamppo in the tank ... Kirby Ultimate G Bagged Upright Vacuum

Need a cheaper alternative shampoo for kirby vacuum system. Has to be an encapsulating shampoo. Kirby shampoo is too dear and only does one room per bottle. Need to know where to get some in australia as the postage from america is 3 times the price of the shampoo. thanks


Look up your local janitoral supply companies in the yellow pages. Encapsulation shampoo should be readily available in AU. \015\012\015\012Here is a list of websites to check out: \015\012\015\012 ... Kirby G4 Bagged Upright Vacuum

Kirby Shampoo system not dispensing foam


Few possible causes1. Valve under the sponge (water tank) is clogged. Replacement HERE.2. Tray is now lo ... Kirby Ultimate G Bagged Upright Vacuum

I HAVE A BISSELL PROHEAT CARPET CLEANER 7920 I DISSEMBLY IT TO CLEAN IT. I DON'T KNOW IF I PUT THE HOSES BACK IN THE RIGHT LOCATION BECAUSE AFTER I PUT IT BACK TOGETHER IT'S LEAKING WATER ALL OVER THE FLOOR BUT IT WILL RECOVER THE WATER FROM THE FLOOR AND THE SOLUTION WON'T SPARY OUT I THINK THE HOSES ARE NOT IN THEIR RIGHT LOCATION TO STOP THE FLOW WHEN IT'S NOT SUPPOSE TO BE COMING OUT CONSTANTLY HELP PLEASE IS THEIR A HOSE DIAGRAM FOR THE HOSES INSIDE THE CARPET CLEANER


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

I HAVE A BISSELL PROHEAT CARPET CLEANER I DISSEMBLY IT TO CLEAN IT. I DON'T KNOW IF I PUT THE HOSES BACK IN THE RIGHT LOCATION BECAUSE AFTER I PUT IT BACK TOGETHER IT'S LEAKING WATER ALL OVER THE FLOOR BUT IT WILL RECOVER THE WATER FROM THE FLOOR AND THE SOLUTION WON'T SPARY OUT I THINK THE HOSES ARE NOT IN THEIR RIGHT LOCATION TO STOP THE FLOW WHEN IT'S NOT SUPPOSE TO BE COMING OUT CONSTANTLY HELP PLEASE IS THEIR A HOSE DIAGRAM FOR THE HOSES INSIDE THE CARPET CLEANER


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

How can I use my shampoo system for my Kirby? I


How can i use my shampoo sysemfor my kirby?? ... Kirby G5 Bagged Upright Vacuum

I am using kirby shampoo system but the shampooer is not working


... Kirby G5 Bagged Upright Vacuum

I have a very old kirby generation 3 unit that converst to a carpet shampooer. I was attemtping to shampoo the carpets but it does not seem to be picking any of the water back up out of the carpet. What am I missing?


Make sure the belt on the carpet shampoo aggitator is good, (could be stretched or broken) recommend replacing that belt. also make sure your fan in the front of the machine doesnt have any chips or cracks around the center. (this will cause lower su ... Vacuums

How to assembel the kirby accesories to manually shampoo


I just did and it's multiple steps but not too hard.There are complete detailed explanations if you do a search engine on kirby shampooer instructions. I found one explanation on Ebay, and another on EHow. www.goodvac.com/Articles.asp?I ... Kirby Ultimate G Bagged Upright Vacuum

Kirby G4 causes black streaking when shampooing carpet


Replace the belt it is probably worn. You can get a replacement here:Kirby G4 Belt ... Kirby G4 Bagged Upright Vacuum

How do i use my carpet shampoo system?


Please copy and paste the address below to the address window to obtain instructions for your Kirby Shampooer.\015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0737 seconds