Having problems with your Vacuums ?

How do I change the fan on my model 2HD kirby


Answers :

Generic problem for all Vacuums
\015\012How do I change the
\015\012posted by Rogor on Apr 18, 2008
\015\012How do I change the fan on my model 2HD Kirby
\015\012 I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
\015\0121st you need to remove the head with the revolving brushing by dialing off the belt and undo the Kirby lock @ the top o the bell housing. Remove the head and that will expose the fan and the fan housing. The fan housing is held on by a couple of screws and once you removed the screws then you need to separate the fan housing from the motor section, it is held on by a Kirby fan housing sealer that is clear – so try to separate the fan housing with a knife or screwdriver, once the fan housing is off the Kirby fan is screwed on I believe either clockwise or counter clockwise and un-screw the fan and follow the reverse situation on installing the fan but you need to use the clear Kirby Fan Housing Sealer to re-seal the fan housing and let it dry and wipe of the excess clear sealer before putting it back together again. Always remember on the Kirby vacuums – use genuine Kirby parts on the repairs, it does make a difference. Then go back and place the Kirby head back on the vacuum – lock it on place and then re-dial the belt onto the Kirby fan shaft, plug your vacuum in the wall outlet and test run the vacuum.
\015\012http://kirby.com Contact Us by Phone
\015\012United States and Canada 1-800-494-8586
\015\012Between the hours of 8:00 am to 5:00 pm EST
\015\012Monday thru Friday
\015\012
\015\012www.A-1Vacuum.com 1-800-657-1874
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I change the fan on my model 2HD kirby


Generic problem for all Vacuums\015\012How do I change the\015\012posted by Rogor on Apr 18, 2008\015\012How do I change the fan on my model 2HD Kirby\015\012 ... Vacuums

How can I change the belt on the kirby vacuum shampooer brush roller. There is no way to snap the roller out and it seems that trying to unscrew the end isn't doing anything either.Model 5584 renovation group is what is written on the shampooer attachment. The kirby is a heritage model 2HD - purchased in the late 1980's.


... Kirby G6 Bagged Upright Vacuum

I need to replace the fan blades on a Kirby Heritage II, Model 2HD, vacuum cleaner. How do I remove the drive shaft that the fan is mounted on? Thanks, Robert Croft


... Vacuums

Hi. This is a Kirby Vacuum model G7D. The Ultimate G series. Have problem with Neutral/ Drive lever on back. Very difficult to operate, very stiff and sometimes impossible to change gears. Torx head s


Manual on how to do it - take a look HERE ENJOY ... Vacuums

Old Kirby Heritage 2 (Model 2Hd ) won't power on


The power light is a 2 stepswitch make sure when u put yhe power head back on it is locking all the way back if so and not working the switch may have failed ... Kirby Vacuums

Broken fan need a repair man or service centre. If not a replacement fan for self repair. I live on the Gold Coast Ray is my name. Kirby Legend 1 model 2HE


Http://www.ultimatesanitarysupply.com/pdfs/VacuumMaintenance.pdf\015\012\015\012see the link ... Kirby Vacuums

How to change the fan in kirby heritage 2 - Kirby Heritage II Vacuum


This site has a great tutorial on how to do it. I did it myself and it worked out great. Get the parts online or at your ... Kirby Heritage II Vacuum

I just installed a Ceiling Fan Model 52-BGM. I did not change the codes before I installed it because in the instructions, it did not mention it till the end. My problem, I can turn the fan on and off but not the light. Do I have to take it down and reset the codes?


HelloYou have to reset the code.If after resetting the code it does not work take it to the manufacturer because this is a new product.Thanks. ... Vacuums

Just properly installed a Hampton Bay ceiling fan - Midili, 44inch Model #44-MDL. Loaded the remote control with a 9 volt battery and the remote is EXTREMELY HOT. Changed out the battery with another brand and the same thing happened again. It is so hot you cannot even hold the remote! Help...! I want to use my new fan.


... Vacuums

Kirby Heritage II 2HD Vaccum Cleaner. I have removed the housing and reached the motor shaft for the vacuum fan. How do you remove the fan from the shaft.


Hi, you can visit this site to view how to remove the fan from the shaft...http://www.diyonline.com/servlet/GIB_BaseT/diylib_article.html?session.docid=1678Take care ... Vacuums

How do I change the fan in a Kirby G3 vacuum cleaner


See this MANUAL. Let me know if it helped ... Kirby Generation 3 Bagged Upright Vacuum

Replacing the bearing behind fan on a kirby heiritage II 2hd


I don't know what model of Kirby you have but on all Kirby's that I know of you have to remove the fan. Here are two vid's on fan removal for a generation series vacuum. ... Vacuums

KIRBY MODEL 2HD HERITAGE II MANUAL


... Kirby Vacuums

Change fan unit - Kirby G4 Bagged Upright Vacuum


Here is a free online manual. The fan is also available for purchase. :0)\015\012\015\012http ... Kirby G4 Bagged Upright Vacuum

How do Ii change the fan impeller - Kirby Ultimate G Bagged Upright Vacuum


There's a good video on youtube on this.\015\012\015\012http://www.youtube.com/watch?v=dhIoSRs2R4M&feature=player_embedded#! ... Kirby Ultimate G Bagged Upright Vacuum

How to change the belt on my Kirby Model G10D


... Kirby Ultimate G Bagged Upright Vacuum

We have a Hampton Bay 54" Ariele Ceiling Fan (Model 460 952), purchased in July 2008 and installed August 2008 in our new home, by our ellectrician. It has just now stopped working. Have tried changing battery but to no avail. Could you please assist? Thank you


... Vacuums

I have a Hampton Bay ceiling fan model #EC2T-36 HPF. We broke the globe that covers the light bulb when we were changing the bulb. Just wondering if you could tell me where I can buy a new globe cover?


... Vacuums

A Kirby Heritage II model 2HD Use and Care Manual


... Vacuums

How do I get the case apart on my Kirby Heritage II (2HD) to replace the fan impeller? I can only find 3 screws holding it and there seems to be more.


From the rear, there are 3 screws on right and one on the lower left. There is 1 more on the front at the top just under the lamp. You will also need to remove the safety switch - the plastic thing down and just right of the front screw. Tak ... Kirby Heritage II Vacuum

Model number uc7051r serial 9801-104287 remote control fan does not come on after pushing button on remote and after changing batterise in remote


... Vacuums

Need to change the belt on my kirby model 519, assuming this is the problem since the beater bar is not turning and I can smell burning rubber


The beater bar is jammed--usually from thread, string, and hair that is wound up on the bar and particularly on the bar end bearings. The bearings themselves usually require cleaning and re-oiling. The belt may be damaged sufficiently to require repl ... Vacuums

I want to change fan on 516 kIRBY - Vacuums


... Vacuums

Replacing the fan hub on a kirby classic omega 1CB


I resolved the problem .I found a way to hold the armature shaft still while I unscrewed the pulley drive nut ,which must be removed in order to remove the vacuum fan.\015\012\015\012> There probably is a special tool somewhere that w ... Kirby Heritage II Vacuum

This fan is the Aloha Breeze 16inch Vintage Stand Fan made in March of 2010. Serial# 02299 model # 46052(46051) purchase order # 2082395186 UPC # 759590460526 it is the heavy chrome model. We have owned this only 3 months and it just quit working. No symtoms, no pre-warning, no smokeing, it just quit. HELP


You are still in the warrranty period of one year and it is most adviceable not to tamper it so as to lose the priviledge.\012So please get in touch immediatley with your dealer.\012Only If there is no help do you need to open the base an ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0510 seconds