Having problems with your Vacuums ?

Where can I get a spare head for my russell hobbs hand blender model no 13891

Answers :

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Where can I get a spare head for my russell hobbs hand blender model no 13891

... Vacuums

Please tell me where I can get a new belt for my Vaccum Cleaner it is a Russell Hobbs upright Pet Master I am in Kempton Park the Model No. is CLONIC1800.

Try Moshoeu Appliance Repairs at 32 Voortrekker St.or phone them on 011 394-6487, If they have not got the right thing they may have one that fits, get one for you or tell you where to get one. You could also phone Kl ... Vacuums

I have an older Wega 2 group espresso machine. Looks like a date of 1992 on the group head, but not sure. This has no model name that I can find. Anyway, when I turn it on I get all lights flashing after it heats up 5 minutes or so. I do get nice steam from the wands. I drained teh tank and found a little scale, but not much. I took apart the group heads and cleaned them thinking it may be a clog there, but that doesn't seem to have worked. Also fwiw the water level float is not visible and whe

For a new fridge, need more time to maintain the required temperature of the fridge abut mainly the goods in it? So everything seems normal. The time will be reduced day by day since the goods will stay for longer time in and door opening will bec ... Vacuums

Russell hobbs vacuum spares salton 13760 2000w c.

... Vacuums

Russell hobbs vacuum spares salton 13760 2000w c.

... Vacuums

I got my Mom's Kenmore sewing machine and I an trying to figure out how to get the scalloping and arrow head stitches to work. I have followed the manual and I can get all the other stiches but those two. It is a Model 1451 zig zag machine. I realize it is old, but the machine is just like new. HELP. Thank You.

... Vacuums

Hoover Max Extract LS F6056900 Hand Tool not working / Cleaning Solution I need to know what I need to get in order to have the hand tool work on this model. Also, what cleaning solution is best for pet stains? Tried cleaning, pre-treating with Spot Shot and towel and/or scrub brush, then cleaning, still doesn't work. PLEASE HELP!!

... Vacuums

Broken belt I have a royal canister model 4750 with a broken belt on the power head. I don't know how to disassemble the head to get at the belt.

If you have the power head with the headlight, squeeze the sides of the upper part (almost like a superstructure,) where the headlight is located. It should lift off, allowing access to the screws to get the powerhead apart the rest of the way, and o ... Vacuums

I have a Hoover Platinum carpet cleaner, and it has stopped dispensing cleaning agent and water. This model has a separate tank for water and separate tank for shampoo dispensing. It also has a power hand unit that dispenses shampoo. All along the hand unit has continued to dispense shampoo. Symptom #1, the water tank seemed to be taking on shampoo, as it was getting sudsy. Symptom #2 - On wash mode, nothing would come out, on Rinse mode, sudsy water would come out. Later, symptom #3 - not

Somewhere on the outlet is a control tap thats driven by a rubber band and something is up with this control ,best advice here is put it in the boot of the car and take iot to a hoover dealer ,they will do it seconds for you ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

I have Russell Hobbs 2200 Hepa Filter Vacuum Cleaner. Where can I buy a new head for it?

... Vacuums

Took apart the turbo head on my russell hobbs pet cyclonic 2000 to unblock it and am now unsure how it goes back together. please help

... Vacuums

I have a Electrolux Oxygen model 6996 A. The power head and the dog hair hand tool no longer spin. What wouod cause this and what part would I need to replace if necessary. I have owned this for 6 years (7 kids, 2 dogs) and it is an amazaing vacuum! Thank you. Susan

... Eureka Oxygen 6996 Bagged Canister Vacuum

My Fantom Thunder upright has a blockage that sounds like it is directly above the dirt bin in the "head". I cannot access it from inside the bin chamber by going up the nozzle with a claw parts retriever. (This is the older model where the cyclone nozzle doesn't come off.) The wand, hose, rear inspection port, and front brush intake are all clear. How do I get the top of the vac off above the dirt bin? I don't see any screws or slots.

... LG Vacuums

I am trying to change the coupler on a KitchenAid blender model number KSB560ER0. It is a recessed coupler and I cannot get it to unscrew in the clockwise direction no matter how hard we try.

... Vacuums

My russel hobbs mountain breeze ir purifier has a check filter light on even though ive just put in new all 3 filters....how do you get the check filter light off??

Push the mode and set buttons simultaneously to clear the check filter message from the display. ... Vacuums

Instruction manual for bread maker model no 4461 Russell hobbs

... Vacuums

I have a 25 year old juicer blender model #mj-130p. I lost the plastic piece that pushes vegetables into the juicer. How can I get a replacement. Thanks

It is going to be very difficult to find the actual plastic piece you are looking for since the juicer is so old. I personally recommend you use something like a generic muddler, something like this and you should be good to go: ... Panasonic Vacuums

The belt broke, and I can't find out how to get a replacement (Shark Hand Held Euro-Pro Model V15Z. Help!

... Euro-Pro Cordless Bagless Upright Sweeper - Blue/Gray

Got this blender in 83 and the pitcher is cracked. Model 600-1. Can I get a replacement?

You didn't give us the blender's manufacturer so it's tough to say.\015\012If one of the majors (Oster, Kenmore, etc.) you have a good chance and there are several large companies that have a huge inventory of miscellaneous parts; search on 'applianc ... Vacuums

I have a Shark Bagless Cyclonic Hand Vac Model # V15Z. Where can I get a belt for it.

Shark V1510 Belt is the same model - head to SharkVac.com and you should be able to find them. $7.95 for two plus about $5 shipping. ... Vacuums

Where can I get spares for a Euro pro Shark steam blaster model s3300

Hi,Check the manuals link....Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

The hose works great, but the head of the vaccuum does not pick up anything !!! I checked every opening that may have been clogged, but nothing came up. When I hold my hand under the brush/roller, it seems to be putting out more air than intaking air. Particles "dance" on the carpet, but don't get "sucked up" into the vaccuum ? I have had the vaccuum only 1 year, so the brushes should not be a problem. I changed the bag, and checked the belt. The belt and brushes seem to be OK. ?

Hi there,Uprights are notorious for debris forming clogs when changing direction. The 90 degree turn where the base suction goes up. Have a closer look . You may need to pull the base plate off to access the blockage.Best reg ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

I bought this second hand, so have no manual for parts, etc. I smelled something really bad, am assuming it was the belt. How do i release the head of the vaccume to get to the roller. It needs cleaned anyhow.

Rotate the front belt lifter from green to red then rotate the locking knob above the nozzle. and the head will lift off. it helps if you put the height adjustment in the highest setting. did it smell like rubber burning? ... Kirby G5 Bagged Upright Vacuum

The top of the vacuum cleaner gets very! hot with little use of hand wand. it is a majestic model with chrome top about 6 years old

The exhaust is from the top so it will normally get pretty hot. If the machine shuts off, then there is a clog, or a full bag. Most of your machine is actually plastic, so examine it closely for warping or any discoloring. Also if it sounds funny yo ... Vacuums

The motor is shot on my shark XSH035. can I get the motor replaced - as I prefer the attachable, flexible hose feature for cleaning cornors & creavices and the newer hand-held models do not provide this option.

The motor is available from manufacturer.The manufacturer website is currently not working, here is the website: ... Euro-Pro S3325 Handheld Steam Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0705 seconds