Having problems with your Vacuums ?

How to change the belt on a Hoover High Performance upright vacuum cleaner


Answers :

Chang the belt
Generic problem for all Vacuums
\015\012How to change the belt
\015\012How to change the belt on a Hoover High Performance upright vacuum cleaner
\015\012
\015\012I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
\015\012Most of the Hoover upright vacuums service from the bottom and to start remove the bottom plate, that should expose the belt – if this is the case, some Hoover’s might be self propelled, if not the self-propelled vacs have 2 belts and the non self propelled models have one belt – so remove the belt(s) and then lift up on the brushroll and slide the belt onto the belt pulley then take a screwdriver tool with a hook on the end and stretch the belt onto the motor shaft – once this has been done the track the belt(s) and it should straighten out and run straight, re-install the bottom plate, plug in and test. If you cannot get @ the belt from the bottom the look for 2 or 3 screws – remove the screws and the top cover will lift off and then follow the procedure mentioned above… Questions? Please feel free to contact your local vacuum dealer in your area or in the yellow pages or contact the Hoover factory for more details.
\015\012http://www.hoover.com Telephone
\015\012Contact our Customer Service Department at 1.330.499.9499
\015\012Monday through Friday
8 a.m. - 7 p.m. EST
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to change the belt on a Hoover High Performance upright vacuum cleaner


Chang the belt ... Vacuums

How to change belt in hoover core 3 upright bagless vacuum cleaner


... Vacuums

Upright vacuum cleaner model dm4485 belt change assistance


... Hoover Vacuums

Change belt Hoover vacuum cleaner U4247-030 - Hoover Vacuums


... Hoover Vacuums

How to change belt on hoover savvy vacuum - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


How do I change the smaller brush belt on a Hoover Windtunnel Cyclonic? ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Vacuum belt keeps coming off. Need instructions on how to change belt on Panasonic mc-6955 upright vacuum cleaner.


... Vacuums

Change belt hoover upright vacuum - Hoover Vacuums


Take out the screws on bottom where the brush is pull out brush assembly and look for a broken belt ... Hoover Vacuums

How to change belt on old upright Hoover vacuum


... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

We have a Hoover upright vacuum cleaner, model Core 7. There is a switch that turns on and off the brush drive. This operates via a cam with a bearing putting pressure on the final drive belt to engage the brush head. My brush head is not turning and with the lever set to engage the drive there is still considerable slack in the final drive belt. There appears to be only a bearing deflecting the belt, should there be a pully or other device mounted on this bearing? There is so much slack a


Yes, there should have been a white plastic sprocket on top of the bearing - in its channel the belt would sit. Unfortunately no parts are available for this unit that can be bought retail - only available by order to dealer repair shops.\012\012\012 ... Hoover Vacuums

Changing a belt on a Hoover Vacuum Cleaner, Model U4264-930. can not get the old belt off.. U4264-930can not remover old belt on sweeper


... Hoover Vacuums

My hoover Wind Tunnel vacuum cleaner's motor spindle keeps overheating. Because of the high temperature, it keeps burning through belts (the big, wide ones). I have taken it in to the vacuum repair shop about three times now, and the problem has never been fixed. Does anyone have any advice on how to fix this or should I just buy a new vacuum?


... Vacuums

Change belt on hoover savvy bag and bagless upright vacuum


... Hoover U8155-900 Savvy Bagged Upright Vacuum

I need to replace the agitator belt on a Hoover Elite U4465-9 upright vacuum cleaner. I have removed the bottom cover, but there is no access to the motor spindle to loop the belt around. How do I do this?


... Vacuums

How do change belt on Hoover U5163-900 - Hoover Fold Away U5162-900 Bagless Upright Vacuum


... Hoover Fold Away U5162-900 Bagless Upright Vacuum

How do I change the belt on a vacuum cleaner - Shark Helmet NV22L Shark Navigator Upright Bagless Vacuum


You don't. Call cust. service, they sound send a new head. ... Shark Helmet NV22L Shark Navigator Upright Bagless Vacuum

I have an old upright hoover vacuum. I need to change the belt but can't figure out how to get to it. The bottom plate over the roller brush comes off but I can't get anything else off to get to the other end of the belt.


Model no. req ... Hoover Vacuums

How to change belt on Hoover Elite supreme - Hoover U5227-930 Elite Upright Vacuum


Hello. go to http://www.hoover.com/pdfs/manuals/U6454900.pdf\015\012for step by step directions. Joe ... Hoover U5227-930 Elite Upright Vacuum

Change belt in hoover turbopower 1500 vaccum - Hoover U5046-930 Turbopower Bagged Upright Vacuum


... Hoover U5046-930 Turbopower Bagged Upright Vacuum

CHANGING VACUUM CLEANER BELT - Hoover U4270-930 Vacuum


... Hoover U4270-930 Vacuum

How do I change the belt on my Hoover Elite Dual Purpose Vacuum cleaner? The belt part # is 38528-027. Where is the motor pulley?


The hoover belt number you listed (38528027) has been changed by Hoover to 38528040. Below I have listed a link to the manual that has instructions and a link to the belt you need. Hope this helps! ... Hoover Elite U5061-900 Bagged Upright Vacuum

Change belt on hoover whole house - Hoover Whole House Bagless Upright Vacuum, UH71214


... Hoover Whole House Bagless Upright Vacuum, UH71214

How to change the belt on hoover upright U3305-030 vacuum


... Hoover Vacuums

How do I remove the roller from the hoover c1429 vacuum cleaner in order to change the belt. Thanks.


That is an elite style upright. You will need to remove the hood by releasing for tabs around the outside of the hood/base. The brush will simply lift up. You may need to pry on the base with a flat blade GENTLY to get tabs on the ends of the roller ... Hoover Vacuums

I accidently ran over a sock while vacuuming underneath my bed and the belt broke (brush does not rotate now). I've always changed the belts in my vacuum cleaners, but the Healthy Home manual states that I need to bring it into a shop so that a professional repairman can change it. I find this ridiculous and now wish that I never bought it. How do I change the belt myself? PS I have already bought a replacement belt.


... Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue

Need to change a belt on a hoover encore supreme upright vacuum


I'm more specialized in Kenmore vacuums, but I believe there should be 2 screws at the bottom of the vacuum. You will need to remove these 2 screws to be able to remove the bottom cover. Once the bottom cover is removed, you should be able to access ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1637 seconds