Having problems with your Vacuums ?
Where can i get set up instructions for a Maxim Multifunction Weather Station?
Repair Help & Product Troubleshooting for Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Where can i get set up instructions for a Maxim Multifunction Weather Station?
I have a multifunction robotic auto vacuum cleaner model number XR210. It doesn't seem to be charging when at the docking station. The light is flashing on the docking station as if it was charging, but then I am getting intermittent noises like the vacuum is about to start up, then it beeps and goes silent again. I have emptied the machine. The display does not read 88 as if there is a malfunction, so I'm really not sure what's wrong with it. If I put the vacuum to the docking station the displ
I have an edic aqua fresh box extractor and I'm trying to use it....however I do not have the manual on how to operate it. There are instructions on top of it, but they are partially ripped off and faded. After setting it up and trying to use it, I don't seem to be getting any suction. Any advice or help?
What do you do to get the most suction power from the DC04 dyson zorbster. It seems the only way to do it is to bang it which can't be the right way.The settings at the bottom do not seem to work and I have no instructions.
Clean or change the filters every 3 months and maybe have it serviced every year ... Vacuums
I have an Acu-rite weather station that is older and I need an instruction manual. The modle # is...75321A1 Can you help me?
... Acu-Rite Vacuums
How do i get my weather radio from travel to local setting
If you don't have a dial or switch, there is no way to tell, since you didn't provide any information about the radio. ... Vacuums
I have a Barolo AU9 ws-1 atomic weather station clock. The alarm set . I need to know how to turn the alarm off and on.
Use the + button to scroll to 1, 2, or no alarms (off). ... Vacuums
Hello, On the 24 of June 2010 I purchased an Oregon Scientific Solar weather Station with indoor humidity gadget in Budapest Hungary. I opened it and tried to put it in function only 10 days ago,at the end of November,because I had another one(not exactly the same),which I had had for several years and I wanted to change. I live in Israel. After I read the instructions I did everything I had read,but the outdoor temperature doesn't show off and the clock isn't correct either. What should
I'm a little confused about this question. You bought it in Budapest but live in Israel? This could be why the clock is wrong. Many of these Weather Stations (it would be helpful to know the model number) have radio controlled clocks, which pick up a ... Vacuums
Cannot locate where to plug adaptor in. Sharper Image LumiNight Weather Station EW400 Instructions do not show or explain. Unit comes with adaptor which is mentioned in manual, but cannot locate a plug in on actual unit or sensor.
Hello--to plug in the power you'd need to open the base battery compartment ... Vacuums
Cant get my soap dispenser hose working on my karcher winner 10, any suggestion?, lost my instructions manual so dont know weather i need to be doing anything for it!
If you have not yet found a solution, then here are some steps to take.\0121. The soap dispenser only works on low pressure!!!!!!! So you have to\012 REMOVE the high pressure Sprayer so that all you use is the Trigger \012Gun without the Ext ... Karcher Vacuums
I purchased a Nexxtech Atonic Clock and weather station . No.433MH2 The instructions are so small I cannot read them Do you have them on line so that I can print out a larger print than I have at present
... NexxTech Vacuums
Instruction manual/user guide for Discovery Channel Weather station sfx 7500?
I bought a Bissell Poweredge Pet vacuum from target. There were no boxed products so I took it off the shelf. The instructions are in the clear filter, but I can't get the vacuum to release and let me get the instructions. How do I ge the instruction pamphlet out of the clear filter portion of the vacuum?
Hi,If you go to this website, http://www.bissell.com/poweredge-hard-floor-vacuum/ you can download a manual for you vacuum. Look on the right side of page for "downloadable documents and click on the manual.This will give you ... Bissell Vacuums
I was given an Auriol H13726A weather station and after 5 days of perfect functioning, now it will not find the wind station. I tried resetting the whole device, but still I have no response from the wind meter. I noticed, when changing the batteries, that the LED on the wind meter will not light up. As this was a gift, I no longer have the receipt and I don't know where the weather station was bought. Thanks for helping,
Barolo weather station AU9-WS-1
Recieved this National Geographic Weather Station weather station for Christmas gift. I have had to replace the batteries in the outdoor sensor twice in two weeks??? Is this common? The outside temps have been below zero.
I HAVE LOST MY INSTRUCTION BOOK FOR THE STEAM VAC SPIN AND SCRUB. I WANT TO USE THE STAIR ATTACHMENT, BUT I CAN'T FIGURE OUT HOW TO HOOK IT UP, OR OPERATE IT. I SEE WHERE THE PLUG IN PART GOES IN THE FRONT OF THE MACHINE, BUT I CAN'T GET THE OTHER PART TO SLIDE INTO PLACE ON THE FRONT OF THE RESOVIOR TANK AFTER I REMOVE THE FRONT PANEL, AS THE DIRECTIONS ON THE FRONT OF THE RECOVERY TANK SAY TO DO. THE FIT IS JUST TOO TIGHT. WHAT AM I DON'T WRONG- OR HOW COULD I GET A REPLACEMENT INSTRUCTION BOO
You can download a PDF version of the manual at the link below. I believe you can contact Hoover as well and they might mail you one.http://www.hoover.com/CustomerService/Manuals/Default.aspxGood Luck! ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
I purchased an Emerson smartset alarm clock I had to unplug and replug Unfortunately, I can't get the time reset properly It keeps resetting iteself........to the worng time I can't find what i did with the original instructions Where can I get a duplicate manual or instructions to correct?
Scroll through this list the duel alarm with smart set will probably be simiular. Good luck. http://portablem ... Emerson Vacuums
I have WW67WC scale. having problem setting up personal user info for height and age. When I get display for hight, it defaults to 4.3 and arrow up does not move the numbers so I'm getting inacurate results for BF factor. Please let me know how to set it up. Thanks
... Conair Vacuums
I just purchased a westclox tech model 70014 yesterday. I read the instructions and set the time. About an hour later, the time reverted back two hours. I read the instructions again and repeated setting the correct time. I assumed it was working. However, I woke up by myself today at 5:30am, but the clock read 1:14. Is there any way I can fix this or is it a manufacturing defect?
My Oregon Scientific BAR888 has 5 windows, 1. temperature, 2. humidity, 3. mb/hPa or inHg (switch at the back), 4. bars showing pressure changes over 24 hours, and 5. time/date. Window 3 gives an option to set something between 0 and 2500. Oregon say they only have one set of instructions for the BAR888 but they do not match my instrument as there is nothing included for my window 3. Trouble is I don't know what the 0 to 2500 relates to and therefore don't know what to set it at.(My model does n
Instruction maual I can't find my instruction manual & want to use the shampooer. Any chance of getting the instructions online?
Spent some time, snapped 20+ pictures. I hope this will be informative enough. Any comments would be appreciated Kirby Shampoo ManualGood Luck ... Kirby Ultimate G Bagged Upright Vacuum
Turbine Hi I found out through your site that my turbin is bad on my steam vac and I found some information as well on how to disasemble the steam vac to get to the turbine but still was wondering if there were some more detailed instructions on how to remove the turbin. I am a sigle mom and doing the work on the steam vac myself and need a little more detailed instructions. Please help asap and have a bless day.
There are some screws on the bottom that have to come out so you can remove the top housing. Take the brush block out, there are 2 screws above where it sits. The turbine sits near the front, and in the mid section, 2 screws on the front of it and 2 ... Hoover F7220900 SteamVac V2 Upright Vacuum
Belts breaking/melting The original belt broke at almost 1 year so I replaced it. I changed the carpet setting to shag even though my carpet is very low pile to make it easier on the vacuum. I didn't get to use it but just a couple minutes and could already start smelling the new belt getting hot. I checked the roller and it is easy to spin. Not clogged with hair or dirt. Now the inside of the new belt has small pieces of rolled rubber instead of being smooth. The metal shaft that goes into the
... Dirt Devil M088905 Vision Bagless Upright Vacuum
Trying to set up a shampooer on the Kirby G4 vacuum. Cannot figure out how to get the dirtbag off in order to set up the shampooer.
See if this link to kerby helps it has a few videos\015\012\015\012http://www.kirby.com/Portals/0/videos.html ... Kirby G4 Bagged Upright Vacuum