Having problems with your Vacuums ?

Leaking out of hole

\015 Hi\015\012\015\012I went to fill my Hoover Steam Vac and the hole is open at bottom. I went to machine and a black post with a spring on it (reminds me of inside on a pen) was just lying there. I tried to figure out how to attach it back, but I wonder if another part is missing. There is a rubber gasket on the base that it fits onto, but it doen't remove.\015

Answers :

That is the valve asm. to release the water when it is depressed when you squeeze the trigger. Best to replace it, usually it comes with a new seal, hard insert, spring and valve. Check under neath the seal to make sure that the tank is ok, if a hole or crack, then replace the tank.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Water Leaking My CE6000 leaks water profusly (sp) thru the holes where the brush is in the front without me pulling the trigger. How can I stop this? It comes out rapidly and makes a huge mess. Thanks, Bridget


... Dirt Devil CE6000 Featherlite Wet/Dry Vacuum

We've plugged up open holes but the carpet cleaner still leaks from the bottom and we're not sure where the leak is coming from


Hello,What you need to do is to but the carpet cleaner on, and in that process you will turn it upside down, make sure there is no dirt inside.put your face close to the cleaner and try the fill the breeze of the hole, from th ... Eureka Atlantis 2591A Upright Steam Vacuum

It leaks the nozzle at the bottom jam and burnt around the hole ,can this grey part be replaced or toss the hole thing out


\012\012\012Hi,Here\012is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it\012may not be getting steam to the head... ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Leaking out of hole


That is the valve asm. to release the water when it is depressed when you squeeze the trigger. Best to replace it, usually it comes with a new seal, hard insert, spring and valve. Check under neath the seal to make sure that the tank is ok, if a h ... Vacuums

How do I fix Bissell Quicksteamer leaking from water tank through wheels? After I place the filled Clean/Solution tank on the Lower body of the QuickSteamer, water pours out from the body of the machine through the wheels even before I turn the power switch on. I checked the tank and there are no holes in the plastic tank.


I have the same problem... seems to be because of a bad, or worn, rubber gasket. ... Bissell Vacuums

Hello! The suction in my Dyson animal is very poor. I discovered small holes in the internal hose, but even after a quick duct tape fix, still having issues...sounds like the seal from the canister to the vacuum is leaking air. I know I need a major repair but my mother in law is coming tonight! Any suggestions? ~Lisa


Or you can do this for free:\015\012\015\012http://www.ehow.com/how_5870417_modify-dyson-prefilter-suction.html ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Rowenta Vertical Steam INOX Powerglide 2 iron is leaking water while ironing.The water comes out through the holes in the base heavily.


... Rowenta Vacuums

I did not get a manual with my vac. I am trying to soak up water from a water tank leak and water seems to go right trough the vac and water is coming out the blower hole. the tub is not full.


There is a special sock that you need to buy for it. You can run the paper filter if your in a pinch but after that one time, that's it, that filter is ruined.The paper filter is for dry vacuuming, the foam filter is for wet vacuuming, You have ... Ridgid 9 Gallon Wet/Dry Shop Vac 96882 Canister Vacuum

Air leak from small round hole on top right - Dyson Ball DC24 Bagless Upright Vacuum


Hi there,I'm sorry to hear you're having difficulty with your DC24. If the relief valve is activating, your machine may have a blockage, and the filters may need a wash.To locate and remove any blockages, please follow the steps shown ... Dyson Ball DC24 Bagless Upright Vacuum

Water leak I just bought this steamer a few days ago, and already I am having problems, when I fill the water tank that your suppost to fill the water runs out before I even turn the machine on. I have tried using plugs to keep it from doing this just so I can shampoo my carpet, this seems to work to a point, considering the fact that there are two holes underneath close to the brushes and one just a little ways back from that location. Do you know if this is something that should have plugs or


If you just pruchased this, then it is under warranty, take it along with proof of purchase to a warranty repair shop and have them fix it. If water just runs out, then there may be a seal missing or a water line off. ... Eureka Atlantis 2595A Upright Wet/Dry Vacuum

I have an older model F6056-900 Hoover steamvac Spin Scrub Cleaner. My first problem was that I loaned it out to a friend. Anyway she ran over the hose (used for attachments) with her car. I tried using the cleaner for carpet cleaning this morning but when I tried to put the solution tank into place...its loose...won't snap back in like it used to. When I can get it somewhat in place the solution just complete drains out through the bottom fo the tank. The leak is where the small hole on the bot


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have a dyson dc21. All the sudden the hose is hardly suctioning up anything. If I take the canaster off, the top air hole suctions extrememly well, but when I place that canister back on, the suction is not going thru the hose and picking anything up. I have squeezed the hose, I feel no air leaking and do not feel any blockages...what could be wrong. It worked fine the other day and today, it won't pick up a piece of lint!


... Dyson DC21 All Floors Stowaway HEPA Bagless Canister Vacuum - Iron/Titanium/Yellow

My pro bissell heat leaks.


The pop sound was an electrical component blowing inside the vacuum, probably one of the capacitors on the motor control board.Water is not leaking from the tank, water is getting released because the motor is not generating enough power ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Why is my hoover spinscrub 50 leaking tons of water while and after using model no. f5915905


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Is there supposed to be a pin size hole in cap of shark steamer?


... Vacuums

H2o steammop x5 ..water leaking at the bottom from a holefrom the tank


... H20 x 5 Mop

Leaking Solution Tank/Seal Install - Hoover Steam Vac


Not sure this will help, but we have a Hoover Steamvac F5843 and our valve seal seemed to have shrunk so the tank was leaking. Bought a new seal and had the same problem. How to install? There weren't any instructions or pictures of the part(s) invol ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

When I turn on my bissell proheat 9200-T, it starts leaking


It could be that one of the hoses came loose on the inside. It would be best to take out the screws in the black plate, and open it up to see where the source of the leak is on the inside. ... Bissell 9200 Upright Vacuum

Leaks when trying to use upholstry cleaner!


This is a common problem for these units, and is easily fixed. \015\012 \015\012Bad connection:\015\012You may need to push harder on the coupling when attaching it to the machine\015\012 \015\012 ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Rubbermaid reveal mop leaks


... Vacuums

I noticed the Roomba's brushes were not sweeping, or turning so they could sweep. There was a new sound coming from the machine, the sound of grinding nylon! Upon inspection, I determined the problem to be a heat melted gear support hole. The hole was no longer round but oblong. You could see a ridge of plastic around this hole. So melting I believe was the culprit. The gear that uses that hole was then able to tilt to one side, thereby allowing the gear to disengage from the drive train. I


Be sure to keep your brush bearings clean. If they get clogged, the brushes don't turn and the drive sockets can get damaged. ... Vacuums

My vaporetto 2400 is leaking steam pressure from safety valve - what can I do?


... Polti Vaporetto 2400 Canister Steam Vacuum

Leaking My new hoover steamvac with clean surge is leaking. As soon as I fill liquid into vaccum cleaner, it leaks withing 2-3 minutes. It makes my whole carpet wet... Sangeet


My machine leaked badly BUT it was my own fault. There is a one-time\015\012only setup procedure where you squeeze the trigger and push the\015\012Clean-Surge button to lock a rod into place. Push the Clean-Surge\015\012button VERY HARD. There will b ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Rainbow Series E is leaking. Not sure if water is leaking from the water bin (doesn't appear to be cracked/broken). If not the bin, where else might water be leaking from and what are repair options? Have replaced belt on carpet attachment, cleaned the opening where hoses attach to the canister, etc


You need to clean the separator. ... Rainbow E series Canister Wet/Dry Vacuum

I have a hoover F5915-900. Today when I got it our to use it I noticed that it was leaking. I did some troubleshooting, but not sure where to go from here. The solution tank leaks out if the recovery tank is connected also. If I remove the recovery tank and leave the solution tank on it does not leak. Any suggestions would be appreciated.


It dont shamppoo my carpet dont come out or **** it up the hose for funture workes good no sham pooer for rugs ... Hoover F5915910 Upright Steam Cleaner
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0189 seconds