Having problems with your Vacuums ?

Hoover dimension 1000 dead after hot - Vacuums


Answers :

Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=557355
\015\012Generic problem for all Vacuums
\015\012Hoover Dimension 1000 dead after
\015\012Posted by ecmga on Apr 29, 2008
\015\012Hoover dimension 1000 dead after hot
\015\012
\015\012Hello,
\015\012I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
\015\012If I remember correctly there is a heat sensor in the control panel that might need replacing or the hose could be clogged or the bag too full or the filter could be dirty, this was one of the first computer board models @the time they introduced the model to the market and the heat sensor could be attached to the main computer board, so I would check your owners manual to see if that could be the problem or check the factory’s website to see if you can down load the owner’s manual or a schematic on the vacuum itself, or to call the factory to have them send one out or check with your local vac dealer. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
\015\012http://www.hoover.com Telephone
\015\012Contact our Customer Service Department at 1.330.499.9499
\015\012Monday through Friday
8 a.m. - 7 p.m. EST

\015\012Don – The Vac Man
\015\012Go Ahead. Use Us.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hoover dimension 1000 dead after hot - Vacuums


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=557355\015\012Generic problem for all Vacuums\015\012Hoover Dimension 1000 dead after\015\012Posted ... Vacuums

Hoover U5344-950 My Hoover vacuum is a nightmare! I have had nothing but problems with it since day 1. The powerhead stops working if you try to lower the handle to vacuum. I took it in to be serviced and was told it sat on the shelf for too long in the store and it warped the belt...so it was replaced. Got it home, it worked the first time I tried it, then went right back to no powerhead working and as a bonus it is giving off a nasty smell like it is going to blow up! It now gets really hot to


... Hoover U5344-900 WidePath Vacuum

I have bought a HOOvER freespace 2000W cyclonic vacuum cleaner but it runs VERY HOT and I am wondering if this is the usual running temperature. I have cleaned the air intake filter and removeed the e


... Vacuums

Same problem my vacuum cleaner is Hoover Dimension 1000


Witch model due you have ? ... Vacuums

It gets hot then shuts off. - Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum


Most problems with over heating is coased by blockages in the pipes, the main one is behind the brushbar take the sole plate off and there's a suction pipe that is normoly the one that's blocked ,hope this helps you...... ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Hoover Dimension Vacuum - No suction - Any suggestions?


Your fan broke. This is a direct air motor, which means what you pick up goes directly through the fan and they break if you pick up something too big. It's an older design and fortunately one that is made to be repaired. The Fan Part # is 38755030. ... Hoover U5227-930 Elite Upright Vacuum

My Hoover Pet Cyclonic upright stopped working while I was using it. The bottom felt really hot so I emptied the canister & laid the vacuum down with the bottom in the air to cool off & went back in an hour or so, I even tried a different plug in but it still won't turn back on. I don't know what else to try.


This just happened to me. Any solutions or insights? I need to know asap. ... Dirt Devil Hoover Uh70085 Pet Cyclonic? Upright Vacuum

Hoover fan oven too hot - Vacuums


... Vacuums

Belt gets hot and pops off - Hoover C 1429 Bagless Upright Vacuum


Your belt has stretched you need to replace it. ... Hoover C 1429 Bagless Upright Vacuum

Hoover Dimension 1000 quadraflex - Vacuums


... Vacuums

Change vacuum belt on hoover dimension U5209


... Vacuums

Belt Replacement How do you change/replace the belt on a Hoover Dimension Supreme vacuum?


Take the bottom plate off, the brush roll and belt are there. the belt goes around the brush roll and hooks to the motor shaft. If you can't get to the motor shaft, then you will nee to remove the top cover also. ... Vacuums

HOOVER Dimension Vacuum Model U5209-930 Manual


... Vacuums

HENRY HOOVER HOT WHEN USEING - Numatic Henry Bagged Canister Vacuum


... Numatic Henry Bagged Canister Vacuum

I need to replace the belt on the power nozzle of my Hoover Dimension 1000 Model S3491. Unfortunately, I have no written instructions on how to do so. I purchased the vacuum cleaner in the mid-80s. Are the instructions still available? Thanks in advance.


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=566792\015\012Generic problem for all Vacuums\015\012I need to replace the\015\012posted by Deb in Iowa ... Vacuums

My hoover elite rewind stopped running in the middle of vacuuming. Is it dead forever?


Cord may have gone bad, if so you will have to replace the cord rewind. Could be a problem with the switch, maybe the motor. Just have to have it checked out. ... Hoover Vacuums

I was vacuuming and my hoover vacuum died


They have a thermal shut off on the motor so if it gets too hot it shuts downcan take up o 30 min to reset check all filters make sure nothing is blocking ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

My Hoover Windtunnel Ultra U6425-900 began shutting off after a few minutes of vacuuming. The time interval became shorter and shorter. If I leave it sit a while, it will start again. This does not happen when I used the attachments - only with the floor brushes. The switch has recently been replaced and the whole vacuum serviced by a Hoover dealer about a year ago. I have been told by a local repair shop(not a Hoover dealer) that it is the motor, there is nothing to do other than replace t


... Hoover Vacuums

I have bought new Hoover bags on two occasions. The first spares I bought were the Xxxl variety and I didn't think they fitted that well. The next spares I bought were the type g megafilt. I still feel like they do not fit that well and the suction power on the vacuum is not as good. I'm I buying the correct replacements? I followed the guidelines on the Hoover bags the vacuum came with. These were printed as the right bags to buy. I only have the vacuum around a year and thought it was brillian


... Bosch BSG71310UC Bagged Canister Vacuum

Hoover dimension 1000


There are a few screws on the bottom of your hoover, remove them using a suitable unarmed and then pulling firmly upward. ... Hoover S1361 Bagged Canister Vacuum

Change belt hoover upright vacuum - Hoover Vacuums


Take out the screws on bottom where the brush is pull out brush assembly and look for a broken belt ... Hoover Vacuums

Vacuum dead I have oreck XLx2 bagged upright - the belt ,plug and cord have been replaced - has been working great - now went to plug it in and it does not work - the light goes on in the on/off switch so power is working but vacuum is dead - any suggestions


If the cord coming from the bottom up to the handle is loose, and is a plug, push it in. If that doesn't help. then could be a problem with the motor. One other thing to check is inside the handle, maybe a wire came loose. ... Oreck XL2200 Bagged Upright Vacuum

Change belt on hoover vacuum u4270-930 - Hoover U4270-930 Vacuum


... Hoover U4270-930 Vacuum

Bag change indicater staying on and vacuum smells hot when using


I suspect there is a blockage somewhere along the pipes leading to the dust bag.\015\012The bag full or bag change indicator measures how strong a vacuum is present at or near to the point where the bag is connected to the pipes. Under normal ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

I need the manual for Hoover steam vacuum - Hoover F7431-900 SteamVac Vacuum


Go to your local vac. shop,they can get you one. ... Hoover F7431-900 SteamVac Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0772 seconds