Having problems with your Vacuums ?

I have an old model 16C2-1 sn 53 Vornado fan. It needs a new mmotor and repainting. Who can I contact to have it restored?


Answers :

Hi
\015\012
\015\012You can contact check the below links for restoration services available in your area---
\015\012
\015\012Vornado fan 16C2-1 Restoration Service Link 1
\015\012
\015\012Vornado fan 16C2-1 Restoration Service Link 2
\015\012
\015\012New Motor is not available online, you can check out the local store for new motor. You can also get the motor repaired if its not easily available. Hope this helps... Please post back if you need more information.
\015\012Daniel
Click on the link below to view the available contacts for restoration of your Vornado 16C2-1 sn 53 fan.\015\012
http://www.fancollectors.org/info/restore.htm\015\012\015\012\015\012
\015\012\015\012\015\012\015\012\015\012Antique Electrical Supply
(480) 820-5411
Brass and nickle plating kits which work well for small parts, screws, etc.
\015\012Buff Polish & Grind Industrial Supply
Buffs and polishing compounds. Joe Merrit is a great guy and will give lots of advice to his customers.
(940) 455-2269
http://www.buffpolishgrind.com/
\015\012Cherry Tree Woodcraft
(800) 848-4363
Felt for fan bases and Sheets or dots.
\015\012Duro Felt
contact: A. Sahita
[email protected]
Genuine wool felt for fan bases and felt wickingmaterial. www.durofelt.com
\015\012G.J. Nikolas Co
2800 Washington, Bellwood, Il 60104
(800) 346-4741
High quality clear lacquer suitable for coating brass and other polished metals. Sold through distributors around the world, call for one near you. Available from McMaster-Carr Supply Co (see below) Part Number 76885T62, the price is $9/can.
\015\012Plasti-Kote Company, Inc
Availible at Target and Walmart in small 3oz.spray cans. Brass colored paint for Emerson fan blades.Odds 'n' Ends BRASS #139S is a very close match to the original color Emerson used to paint their fan blades in the 1920's.\015\012PPG Products
(Look in your local Yellow Pages under auto body supplies)
Paint, Primer, Filler, Rust Removers, etc. If you want professional results, use professional products. They have some excellent application notes describing their finishing products/process.\015\012Eastwood Company
580 Lancaster Ave., Box 296
Malvern, PA 19355-0296
(800) 345-1178 www.eastwoodco.com
Many high-quality automotive refinishing products including body fillers, primers, paints, pin stripping supplies, small parts plating kits, etc.
Motor Repair and Maintenance\015\012\015\012\015\012\015\012Antique Electrical Supply
(602) 820-5411
Nichrome and magnet wire for switch and winding repairs. Some cloth wrapped wire\015\012EIS Holden Supply
(800)-328-4662
Miscellaneous motor parts: brushes, brush caps, fiber washers, bearings, etc. They sell packs of 100 fiber washers in any size, they also have almost any size carbon brush, min. order is $75
\015\012
\015\012
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have an old model 16C2-1 sn 53 Vornado fan. It needs a new mmotor and repainting. Who can I contact to have it restored?


Hi\015\012\015\012You can contact check the below links for restoration services available in your area---\015\012\015\012Vornado fan 16C2 ... Vacuums

Need a replacement on/off switch for Dirt Devil Deluxe Model 8201 (more than 12 years old). We have the old one out. We just need a new one to replace it. Where can we get one?


... Dirt Devil Vacuums

I have the new power on/off switch to replace the old one(Rainbow vacuum). However the new switch has 4 contacts & the old one has 6. Need wiring diagram.


Simply pair 1 each of the power head leads and motor leads on to one terminal and wire the cord as on previous switch. ... Rainbow E series Canister Wet/Dry Vacuum

The solution stick inside the handle needs replaced and I would like a new face plate. I have the model numbers (38458-031 & 37275-011), but can not locate the replacement parts. This machine is more than 10 years old and works like brand new. I can not see throwing it out and want to fix it. Please help me locate these parts. Thank you!


... Hoover Steamvac F5860-900 Vacuum

IjI need a new foot control for my old Elna model. It is an Elnasuper 62c/H401048. The foot control has the ID# of 447300-1, a new power chord would be great to. I have had this machine for40 years.


... Vacuums

I have a ten year old M+S central vac. it shuts off after about 5 min of use. They came out and took the unit to their shop. I dont have the model #.repair shop says I need a new motor but it runs. what can I tell them?


... M&S Systems FX-3000 Bagged Central System Vacuum

I have a Breville Vac Master model no. BHV9. I can't get it to recharge although the light is on. It is 6 years old. Could this be because it needs a new batterry?


... Vacuums

Old shop vac model 90S250B need new filter - Vacuums


... Vacuums

I need a new hose for an old Eureka canister vacuum. None of the sites I have searched even recognize the model number, which is: 3336A. Can you help?


... Eureka Vacuums

I have a TA Adler-Royal 1123 PD nova printing calculator. (It is very old.) The numbers printed on the tape are very faint. Do I need a new ribbon or something else? Is there such a thing as an ink roller for this model? I am not sure I picked the correct category of expert. You do not have one for office machines or calculators.


Hi, You need a new ribbon.Older or much older desk top calculators used a small sized ribbon such as the old typewriters used except that the reels were about 1 inch across. Often they were divided into a red and black side.It the ... Vacuums

Just purchased a reconditioned model. Makes a ton of noise and the bottom brush doesn't seem to turn like in my old Oreck. Does that indicate it needs a new belt?


Your Dyson does have a belt but its one that cant be replaced it is called a clutch assy. if your roller brush isnt spinning then it could be that you dont have the purple knob on the left hand side if your facing the vacuum to the carpet setting. if ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I need to purchase new blades for our 52" Jericho IV ceiling fan, Model 166315. I went to home depot in Harrisville, UT and they said that we would have to contact you and they didn't have ANY replacement fan blades in stock. HOW COULD THAT BE WHEN THEY HAVE HAMPTON BAY FANS ALL OVER THEIR LIGHTING SECTION? What kind of a business are you running when one can't get replacement parts? Our fan is making noise and I want to replace the blades. How hard can that be? By-the- way; I hope you no


... Vacuums

I need to purchase a new one. Old one lost in move. Phillips Deep Fryer Model H6157/55 magnet power cord.


Need to go through phillips, manufacturer specific. ... Vacuums

Kenmore Model 116 28014700 intuition vacuum cleaner. Latch for hose connection to cannister broke. I have the new part. How do I remove the hose from the broken part and replace it on the new part? I have already purchaed the new part p/n KC92PDDUZV06 for this, bt can't figure out how to get the old part off. It looks like you must destroy old part in order to get it off.


... Vacuums

I need to rebuild an old GE AC motor model # 5KH35GN106CX (attached to a Gast vacuum pump model 0522) and I need the specs.


... GE Vacuums

Brush Roller Wondering if I need a new brush as well as a belt. The Roller seems to have trouble spinning when it makes contact with the carpet no matter how the height is set. Everything else seems to work fine. Do I need a new roller to fix this problem?


The bearings can go bad in the brushroll. It may need replaced, even if the brushes aren't worn. Helpful link....\015\012\015\012 ... Kirby G6 Bagged Upright Vacuum

Need to replace motor on a Simplicity upright vacuum and need help with the wiring the new motor. New motor is different from old one.


You might not have the right motor. Take the old one with you because it should go right back in as easy it was to remove. ... Vacuums

I need a new knife for my Singer Ultralock 14U34A. It's very old but work great, just need a new cutting blade.


... Singer Vacuums

I just got a new machine (new to me anyway) new home hf106 model. i need to thread the bobbin on the new thead i am using and am not sure where to put the empty bobbin and how to thread it. help!


Janome New Home? Unfortunately, Janome doesn't put the manuals for older machines on their website. Your best bet is to contact your local Janome sewing machine dealer and ask for a "copy" of the manual from them. A photo copy should b ... Vacuums

Need a motor for 35 yr old electrolux model CB cannister shop vac


... Electrolux Vacuums

Need new 5 wire motor for filter queen model #31


... Filter Queen Cheetah II Ash - MU305 Bagless Canister Vacuum

I bought a new motor for my Riccar 8850. The new motor has 3 wires and the old one has 2. Which color wire is the ground? (or, which color wire don't I need?)


The third wire is a hot wire that goes to the headlight. ... Riccar 8850 Vacuum

Need a new mounting bracket for a charmglow electric turkey fryer model # SETFAA Can I purchase a new mounting bracket or will I have to buy a new outer shield


Hello,You don't have to buy a new outer shield. Go ahead and purchase a new mounting bracket. This should do.Take care. ... Vacuums

Polti vaporettino old model 2001 - new out of box - how does it w


... Datavac VaporJet 2400 Handheld Vacuum

Need new 14.4 V battery pack for Euro-Pro x Model SV746


... Belkin Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0818 seconds