Having problems with your Vacuums ?

I have a HTC HD mini - the online manual says it should be within tools but I cant seem to find it anywhere on my phone...

Answers :

Somehow your problem ended up under VACUUM's--

I am not sure many of us service guys in Vacuums can help much with this device-- which sounds like a cell phone?
Try listing it under electronics, maybe?

Sorry I can't help further-

Mack B
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a HTC HD mini - the online manual says it should be within tools but I cant seem to find it anywhere on my phone...

Somehow your problem ended up under VACUUM's--I am not sure many of us service guys in Vacuums can help much with this device-- which sounds like a cell phone? Try listing it under electronics, maybe?Sorry I can't help f ... Vacuums

I bough a vacum make Hoover model Freespace cant seem to find this model anywhere on the site also need to buy bags and dont have a bag number in leaflet

We can supply these bags approx £8.95 +p&p ... Hoover Vacuums

Users Guide Does anyone know where i can find a copy of the users guide for the hoover floor mate? I cant find mine anywhere...thanks

Go to: http://www.hoover.com/pdfs/manuals/H3030.pdf ... Hoover H3030 FloorMate SpinScrub 500 Upright Wet/Dry Vacuum

Motor sounds loud and high pitched. Suction seem ok, can't find any blockages. Cleaned filter at top of removable canister. Exhaust seems hot and low. Can there be a blockage within the motor housing?

Most likely your bearings are shot. it will need a new motor ... Kenmore Vacuums

I cant find a motor filter for Eureka The Boss UMC-18 anywhere!

... Vacuums

I have a Piranha Tornado carpet extractor and i cant seem to find any parts online to match this product.Please help! Im looking to replace all 4 rubber wheels and the intake value

... Vacuums

I need to replace the cord on an older Hoover upright, model S660, about 1986 vintage. The cord broke where it enters handle. Handle comes apart easily. Just not sure how to pop the switch out without breaking it. Was looking for a manual online to see parts diagram and/or instruction on disassembly and cant seem to find one for that old of vacuum.

Check ebay. those vacuums are worth fixing. I loved them. they would **** the carpet off of the floor! those cords aren't hard to replace.just remember the way you got the old one out. ... Vacuums

My brush has quite rolling. I have fixed it before, but it was a long time ago and I don't remember what I did. I can't seem to find the answer anywhere on line today. I have the Animal.

Sounds like the brush is stuck and/or the drive belt is broken or loose.\015\012You can find the manual to fix these problems here:\015\012\015\012http://www.dysonmedic.com/PDF%20docs/dyson_dc07_owners_manual.pdf ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do I clean out the suction side of a Hoover steam-vac Model#f6020-900. I took all the screws out and still cant get it apart.I vacuum before using it, but it still seems to find more hair.

These don't come apart. Hoover makes a thin long tool that will allow you to stick up into this suction side to clean it or use a long piece of galvanized metal strip to slide up into it and clear away the hair. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have an elektra pure exclusive edition model 400. I need replacment bags.I cant find them anywhere

Hiwhere in the world are you?Rob ... Vacuums

Have Fresh Aire 2.1 about 4 years was running great then went dead. I cant find where the fuse is and have unit apart. I plug in no fan dim display shows to errors. Unit was pretty dirty at the time. I need schematic and suggestions. Also need to knpw how to remove the honeycomb from the light unit to check for blown bulb. Seems brittle and I could break it with trying to pry with augur or sharp screwdiver object.

I'm sorry this may only be a partial help. But fuses are usually very close to the motor, OR where the switch is located. Pretty easy to find by testing but you have to be or so careful you dont electricute yourself. Now if your testing shows v ... Vacuums

I have a vec-101 vax bagless cylinder vacuum cleaner,only had it a week and the blockage light has stayed on.i have checked everything and cant find a blockage anywhere,what is the fault? thanks

... Vacuums

Cant seem to use the uphostery cleaner tools

Little orifice in the hand unit is prob. plugged. ... Bissell PowerSteamer Deep Cleaner Plum Upright Vacuum

We broke the hook thingy that you pull to empty canister but cant find the part anywhere

If you go to vacuumstore.com you can get a replacement. Your best bet is to call them. You will need to be a little more specific. But most dyson techs know what you are looking for. Ask for Patrick. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I was lucky enough to get a Janome 372 very cheaply at a second-hand store but it came without the manual. A friend managed to thread it so that it works but the threading is completely counter-intuitive and I'm not sure that I'll be able to remember how to do it without a threading diagram to turn to in a pinch. Unfortunately, I can't seem to find a threading diagram online anywhere! Can anyone direct me to a site that shows this?

I would look in a site called www.Pronto.com/manualsI hope this is helpful to you . ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have an old silver king cannister vaccum (R2-D2 star wars) Im looking for filters. When you take machine apart there is a donut looking filter under motor(top of vaccum) that protects motor. I cant find them anywhere. I found the other filter the model uses (disc filters) HELP!!!


I have a typhoon cyclonic 2400watts hoover and i cant find anywhere that sells parts i need the long stretch pipe could you help by telling me where i can get 1 from

... Typhoon Vacuums

I have Genie 10 gallon Wet/dry vac and cant seem to find parts. I need the cloth or paper bigs - used to filter dist. Parts list called these 23332R and 23761. [email protected]

... Genie Company GV150 Wet/Dry Vacuum

I have a broan central vac system need belt for cv315-b vac head cant seem to find one any idea where i can get 1 thanks

I believe that the Broan replacement part number for the belt for the CV-315 power head is a 9967-0585. available through a Broan/Nutone dealer. ... Vacuums

I have a everstar cordless hand stickvac I just boughte on december 3.Their is no customer service phone numbe provided in my owner;s manual.I can't seem to find the support web site ether. home depute dose not have it ether.

I have an Everstar stic vac and there is a Customer Service number "sticker" on the back of my Manual. The number is 866-876-4332 ... Vacuums

I also have a Hoover upright and I need to replace the electrical cord. I have dimantled the back, where the tools are stored, and the hose. I still cannot find the screws or whatever, to get to the area behind the cord, so I can replace it. I think I will have to take off the bottom too. Has anyone out there tried to do this? It seems crazy. This machine works great so I hope I can also put it back together. Thanks for the help.

Since I do not know your specific model I can only supply you with general instructions. Be aware that most of the time you only need to gain access to the on/off switch to replace the power cord. Also Make sure that you are replacing the existing co ... Vacuums

No suction my riccar 8850 has no suction. I cant find any clogs and there is some suction on the hose when using cleaning tools but when hooked up to the vaccum bag it wont clean

Replace your belt. Remove the baseplate, remove the brushroll, place a new belt around the motor pulley, then around the pulley on the brushroll, and pull the brushroll back into place in the nozzle. Spin it by hand to make sure it spins, (otherwise ... Riccar 8850 Vacuum

I have a vax mach 6. There is very little suction when using the tools and it will switch itself after a few minutes. I have had it to bits and cleaned it. I can not find any blockages. The belts also seem fine.

Http://www.vax.co.uk/downloads/pdf/u90-m5_u90-m6_series_user_guide.pdf ... VAX Appliances Vacuums

The pile adjustment wheel on my Sebo X4 has come off; I ordered a new wheel thinking that it would come with the PIN/AXLE but it doesnt. What do I need to order noe? I cant seem to find the pin as a spare part. Dp I need to order a servo motor? Many thanks Hannah

... Sebo X4 Bagged Upright Vacuum

I cant seem to find a manual or even a threading diagram I am disabled so $$ is very hard to come by I was given the pfaff 130 machine just no manual please help. Thank you Karen V

I searched the web but only found stuff for sale and the Pfaff web site di not show any link to manuals. You might try joining this group on Yahoo. I'm not a member so I can't say this group will have a manual but since they are devoted to th ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0592 seconds