Having problems with your Vacuums ?

The tension of the bobbin on my baby lock xscape sewing machine seems to be off, how do I adjust it?

Answers :

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The tension of the bobbin on my baby lock xscape sewing machine seems to be off, how do I adjust it?

... Vacuums

I have a Singer Model #4562 sewing machine. I am having trouble adjusting the tension. Everytime I try and turn the knob to adjust the bobbin just gets looser. Right now it just snags and gets caught underneath the material and bunches up into a big ball. There is a lot of thread inside the bobbin case that came out of the bobbin and has to be cut out to free the material. How do I fix this mess. I am a novice at this. I have not sewn in several years and would like to sew a few quilts

... Vacuums

I bought an old Juki Baby Lock 418 at a garage sale. It will sew for 3 or 4 inches and then seems to be off timing and locks up. I have no instruction manual. Is there a manual available for this old machine? I would prefer a downloadable manual because I already have money invested in the machine which doesn't seem to work. It was suppose to have been gone over at a repair shop before I purchased it and was told that it worked. .

... Vacuums

FOR dlh2457: Just came across your post to another person's dilemma. I found this Baby Lock BL4 428 serger at a thrift store. It powers on but I know nothing about its use. I don't want to spend $14 plus for an owner's manual and find out this machine does not function properly or possibly damage it by improperly threading it or having it out of adjustment. I'm in need of an owner's manual for a Baby Lock BL4 428. If that offer is still good I'll take a "copy" of it and will compensate you for

I've found it , it costs 9.95$ , together with shipping it will cost 15.93$ at your doorstep.Bit more than 14$ but that is th cheapest one.Symply ... Vacuums

I have recently got my sewing machine out after several years of it lying unused after moving house. I cannot find the manual. Where can I get a copy of this manual.The second request is that i need to put different cotton onto the bobbin and can't work out how to remove it from the machine. there is a clear "plate" over the bobbin , but I can't seem to remove that.

You posted in the wrong category and there is no mention of make/ model in your question so sadly it is impossible to help you.If it is any consolation this is in part due to the very poor way that the fixya question posting process works. ... Vacuums

I just had this machine delivered yesterday (Janome Magnolia 7330). When I sew a straight seam (all I've tried so far) I get loops at the underside of the fabric. I adjusted the upper thread tension, but that did not help. In fact the loops got larger as I increased the tension. My thought is that I don't have the machine threaded correctly. Thanks!

Your problem is in the tension adjustment. also check the stitch lengths. \012\012Kdog ... Vacuums

The case for the bobbin is not locked in and the machine will now sew White Stylemaker 3100 (sewing machine)

... Vacuums

I have a 5260D Baby Lock Serger, which I had tuned up a year ago. I haven't used it very much since. When I took it in, and again now, it sews fine for awhile, then starts slowing down until it is barely sewing, even with the foot all the way down. The hand wheel seems very tight. - it doesn't turn freely, but takes a some push, like it is resisting a bit. Any idea what could cause this slow down and the tight hand wheel? I appreciate any ideas. Thank you. Maura

Hi,Since you say that you didn't use it for many years then does it make noise?If so it need oiling on its parts.oil orifice and point of contact.Please do rate the solution if the issue is resolved or post a comme ... Vacuums

I bought a used Nakajima 181L-2 sewing machine and I need a manual. I can't seem to get the tension right and it keeps breaking the thread when I try to sew heavier stuff like my horse blankets.

... Vacuums

We have a vogue stitch janome model 539 115v sewing machine. we were trying to sew but, the thread is not picking up from the bobbin. the thread keeps breaking and we are unsure what tension setting should be used for cotton cloting. please help. thanks! tom staron

... Vacuums

How is the V-belt tension adjusted (Hoover Model U6439-900)or how do I know if the tension is correct? There seems to be a lot of "play" in the belt and I'm wondering if that is the reason the brush roll only turns as the wheels turn, regardless of the carpet height setting. And yes, the brush roll is set for carpet, not hard floor. Or is the cause of the problem something other than the V-belt? A new flat belt was installed when the machine was professionally serviced so I assume (?) that was a

The V-Belt is not adjustable. There are two ways the belt has no tension: (1) when the handle is upright, a mechanical lever takes the drive tension off the belt, and (2) the brush roll lever setting you described. The upper handle would have to be ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Need a manual in English for a PFAFF tipmatic 11477 sewing machine. Help help to adjust tension.

Hi there,\012Well you may please follow the link below to get your manual -http://www.pfaff.com/global/12893_16350.htmlGood Luck!!Thanks for using FixYa!! ... Vacuums

How do you thread a bobbin on a Beaumark 2300 sewing machine to retain tension?

... Vacuums

Janome sewing machine Harmony 2139 The bobbin thread is not connecting with the needle to make a stitch. We have put in a new needle. Using needle 4 tension

A common problem is if needle is in backwards. The small groove side should be toward the operator. As the needle starts back up after going clear down, a small loop should form on the side of the needle away from teh operator. The shuttle has a p ... Vacuums

My baby lock model B17 keeps jamming in the bobbin area and the material gets stuck. I have trein using the fine adjustment + and - to no avail. Straight stich patern 2, stitch length 3 width set to the middle.

... Vacuums

Hello, My baby lock intrigue sewing machine threader is broken. It does not pull thread down. Thank you, Deborah

... Vacuums

Looking for free manual for Baby lock 8500 sewing machine

... Vacuums

Instruction manual for a baby lock BL4-728D sewing machine

Unfortunately this manual can't be found for free anywhere online, I have looked extensively for you. It can be purchased though, for $7.99 from the link I will give you at the end of my answer here...Please make sure you rate my answer ... Vacuums

Need manual Baby Lock Design Pro B21 sewing machine

... Vacuums

Singer 327 lower bobbin thread is wild and loopy after I sew...top stitch fine. Just changed to a large thread spool with the heavy remote base and crook to carry thread to machine and wonder if this changed tension (set at 4 and correctly threaded)? It had been working fine in zigzag but I also went back to reg foot and set stitch width at 0, center needle set. Thanks for your input and help. Deanna

... Singer Vacuums

I need the manual to a baby lock companion intel a stitch 7500 sewing machine

... Vacuums

Our beautiful Bernina 730 sewing machine has been stored in the garage in its original case, and that wrapped in plastic, for a few years now. Temperatures have been both hot and cold in the garage, but the environment was dust-free. We have brought the Bernina in, set it up, oiled it as specified in the manual, with the original sewing machine oil. We have correctly threaded the machine and the bobbin thread is up. When we press on the pedal to sew, the machine gets electricity and buzzes

Hello and thank you for using Fixya ....From what you describe there can be only 2 causes...Either the machine is still stuck ..and the motor buzzes cause it can not spin it ..and in this case it needs to be oiled more..and be spun by hand unt ... Vacuums

I have a Janome QC 6125 which has been sewing beautifully. I have just cleaned the lint from around the bobbin area and now it isn't sewing at all well. The bobbin side seems to be ok except there are loops of the top cotton protruding through the bottom side in irregular intervals. The seam does not seem to be strong either.

... Vacuums

I have a Continental Electric portable sewing machine and I can't get the bobbin to thread into the machine to start sewing. How do I place the bobbin and where does the thread need to go for the need to catch it?

... Continental Vacuums

I have a Kenmore 385.19110 model machine, and the straight and zig zag stitches work just fine, but when I follow the directions in the manual to do a satin stitch (which is use the lowest stitch length) it creates a line that isn't perfect, or uniform, and after an inch or two stops catching the bobbin underneath. Have already tried reinserting the bobbin, rethreading the machine, refilling the bobbin, changing the bobbin, cleaning the needle, changing the tension. Wondering if I just got a mac

... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 1.9833 seconds