Having problems with your Vacuums ?

When I turn it on it is blowing the fuse box - Vacuums

Answers :

This is either a problem with the vacuum or a problem with the house's electrical circuit.
\015\012Does that breaker in your panel trip or blow a fuse any time other than when you use the vacuum?
\015\012It is possible that the circuit is nearly overloaded and one more item being turned on is enought to trip the breaker / blow the circuit fuse.
\015\012Most likely though, there is probably a short circuit in the electrical wiring of the vacuum.
\015\012I strongly recommend you do not plug it in or try to use it until the problem is properly diagnosed and repaired.
\015\012If the unit is still under warranty then you can return it for a new one or have it repaired free of charge.
\015\012Please comment back here to this page with the exact model number of your vacuum, the answer to my first question about the fuse, and whether or not you are willing / capable of disassembling parts of the vacuum to conduct some basic troubleshooting procedures with my direction.
\015\012I will respond as soon as I see your return comments here.
\015\012Thank you very much.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When I turn it on it is blowing the fuse box - Vacuums

This is either a problem with the vacuum or a problem with the house's electrical circuit.\015\012\015\012Does that breaker in your panel trip or blow a fuse any time other than when you use the vacuum?\015\012It is possible that th ... Vacuums

Low suction I have a Hoover central vacuum system. I've reset the fuse box, checked the fuses, all of the lines are clear and there are no holes for escaped air to travel out. The filter has been cleaned as well. The vac works well with high suction when hooked directly to the unit, however when using any of the indoor connections there is extremely low suction. The machine still turns on so I do not believe it is an electronic issue. I have troubleshooted the issue as best I could and would

... Hoover L2310 GUV Central System Vacuum

My electrolux harmony vacuum suddenly won't turn on. Replaced the bag and filter. Still have no power. Did I blow a fuse?

... Electrolux Vacuums

My bissell carpet cleaner shorts out as soon as I turn it on. Blows the main fuse box. Please can you help

... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

I have a Eureka Boss Power Plus and the beater bar is rolling, the belt is turning, but after vacuuming up around the litter box (not a lot of litter), when I turn the vacuum off, the litter, or even household dirt, falls out. When I hold the vacuum back to turn it off so that it doesn't fall on the floor, it's sitting in the cubby where the wheels are. The bag is empty, the hose is not plugged, the hose is securely fitted on both ends of the unit. This vacuum was purchased in July and is being

Even though the brush is spinning, you probably need to replace the belt because it is s ... Eureka Vacuums

House fuse box blows when you plug machine in.

There is a short in your vacuum that is cause your circuit to trip. It is more then likely a ground wire that has come loose in the plug that attaches to the motor of the vacuum ... Vacuums

When we turn on the vacuum, the canister falls open. The clips holding the canister in place do not seem to hold the canister tightly which I'm sure that it did in the past. The clips do not look bent, but every time we turn on the vacuum the intense pressure blows the canister open only remaining attached the the rest of the vacuum by one clip

Check filter and make sure it is kept clean at regular intervals. Possibly worn out clip retainers on cannister side due to excessive pressure build up. Do not force closure unless pressure is back to normal. May crack cannister or damage unit beyond ... Hayden Industries SuperVac 6000 Central System Vacuum

My Vacuum just stop working. I was cleaning my car carpets when it just went off. I tough it got disconnected from the outlet (power supply). The vacuum was connected and it is like when a fuse go bad, just like that it won't turn on anymore. Is there a switch that needs to be reset or a fuse to be replace? How do you do it?? Thanks

There is not any of that. Buy a new one ... Hoover Empower Bagless Upright Vacuum

My vacuum died. It won't turn on. It is not the outlet. Is it a blown fuse? How do I replace the fuse? Where does it go? This vacuum is a little over 2 years old. My older Hoover WindTunnel STILL works and has never had this problem.

It's probably the power switch. My switch was dicey for a couple years, finally gave out. Easy to replace.\015\012\015\012Remove the two screws just above the WARNING on the rear of the upper handle assembly, then slide the whole assemb ... Hoover U6476-910 WindTunnel Upright Vacuum Cleaner Bagged Vacuum

My Eureka Altima Upright Vacuum Model 2996AVS Vacuum wont turn on. Any advice where to start? I would think it may be a fuse but do not know where it is on this vacuum.

Generally, on something with a cord and plug, the first thing I suspect is a bad spot in the cord where it connects to the plug. One way to check it is to turn the vacuum on, plug the plug into a good outlet that you have checked to make sure it wor ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

My Eureka Altima Upright Vacuum Model 2996AVS Vacuum wont turn on. Any advice where to start? I would think it may be a fuse but do not know where it is on this vacuum.

... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

I bought a shop vac and when I turned it on, it was BLOWING, not VACUUMING. I switched the attachment and it stil functioned as a BLOWER instead of a VACUUM

Put the hose on the other end. it will still blow, but it should work. ... Vacuums

The microwave will not turn on. No power. Checked fuse box and power outlet...not the problem. Unit just wont turn on? Is there a reset button or another option.?

Remove the cover and locate the internal fuse you will find near the power cord entry. Replace with the same. ... Vacuums

No power The vacuum worked. Then cut off. I changed the bag and let it sit a bit. Then it turned on. I used it for about 5 minutes and now it's off again and won't turn back on. Is there a fuse or something I can reset?

Miele Capricorn whole unit shuts off totally off when I am using the Miele and I turn the powerhead sharply to the left. It an on-going problem that I have had serviced serval times. The last time the place I purchaced it from replaced the whole bead ... Miele S514 Solaris Electro Plus Vacuum

Modeol116.30012000, changed hepa filter, bag. vacuum seems to be blowing air instead of sucking dirt up. The bag collapses when turned on instead of blowing up with air. any ideas as to what is wrong? Thank you

... Kenmore Vacuums

My fuller vacuum stopped working. At first I thought I blown a fuse. Went to the fuse box and all were set

... Fuller Brush FBHD1 Bagged Upright Vacuum

We just were vacuuming and it stopped as if we blew a fuse. I checked the breaker and it is on and plugged something else in the outlet with no problem but the vacuum won't turn on. Any suggestions?

You said you checked the main breaker but did you change the fuse in the plug ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Believe the fuse is blown in my fantom fm760 vacuum. put the wrong kind of headlight in and when i turned it on it blew the breaker as well. took apart and the fuse is part of the powercord.

Unfortunately Fantom has been out of business since about 2001, so parts are very difficult to obtain. Your best bet would be to try to find the parts online or possibly at a vacuum store, but I would be very doubtful that you will be able to find th ... Vacuums

My vax essentials hoover, model number vec-01 keeps blowing fuse as soon as it is plugged in and turned on. Cleaned the filters and have changed the fuse 5 times

... Vacuums

Vacuum won't turn on, smells bad, worse when I removed the air filter. Can I replace the fuse?

... Hoover U5507900 Elite Rewind Bagless Upright Vacuum

I took the trap(or whatever it's called)off the bottom right corner to check for an obstruction as my hose was collapsing when using the attachments. Put it back on(perhaps wrong)and now when the vacuum is turned on, dust blows out the front and there is NO suction! HELP!

Now you have a dyson leaf blower! not funny huh? Ok, just slow down and recheck your connections. Sounds like the motor is running backwards or you are hook up to the discharge. ck for baffles that block off the vacuum to the roller part when at ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

When I turn on the vacuum dust blows out of the front.


DC07 hose has plenty of suction. Main hosuing has no suction. Beater bar turns fine and works so well creates positive air pressure blowing outward instead of vacuum. Any ideas?

Main housing has no suction becouse of bloakage in it. UPLUG the unit from mains, and remove the bottom (main housing)cover. Clean all you can access and put everything back together. In all the vacuum cleaners all the problems is caused usuall ... Vacuums


Hi there it's SmartAlec from NelsonVacuums.com.au here. It is most likely that the cord where it goes into the machine has a short in it. It is also possible that the motor ... Oreck XL Ultra Bagged Upright Vacuum

When I turn on the vacuum it's blowing air out no suction

It's clogged. Clean the hose path and either clean or replace your filters. ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0909 seconds