Having problems with your Vacuums ?

How to thread a janome sr2000 - Vacuums


Answers :

This sounds like a Sewing Machine problem?
It is being listed under Vacuums--
I wonder if there is a better option for where you should list this problem, so that a sewing machine mechanic could see your problem. We fix Vacuum cleaners here.
Mack B
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to thread a janome sr2000 - Vacuums


This sounds like a Sewing Machine problem? It is being listed under Vacuums-- I wonder if there is a better option for where you should list this problem, so that a sewing machine mechanic could see your problem. We fix Vacuum cleane ... Vacuums

How do I thread the Janome 372 bobbin - Vacuums


... Vacuums

The beater brush on my vacuum appears to roll when I turn on the vacuum however, you only hear the actual sound of it on occasion and the vacuum is not vacuuming thread off the floor.


Greetings from GoVacuum,\015\012\015\012Your belt has probably been stretched to a point, the brush no longer spins when it touches the carpet. You probably can turn the machine over, and see the brush spinning, but it's probably stretch ... Eureka Vacuums

I was lucky enough to get a Janome 372 very cheaply at a second-hand store but it came without the manual. A friend managed to thread it so that it works but the threading is completely counter-intuitive and I'm not sure that I'll be able to remember how to do it without a threading diagram to turn to in a pinch. Unfortunately, I can't seem to find a threading diagram online anywhere! Can anyone direct me to a site that shows this?


I would look in a site called www.Pronto.com/manualsI hope this is helpful to you . ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Janome my lock overlocker 134d.some tips on changing cotton colour .it is such a pain to re-thread when i need to change colour even when i pull through the new cotton thread on the existing cotton thread.


... Vacuums

I have the Janome 6600 P. Beginning a seam the thread knotted and the machine made noise and needle would not move either up or down. I manually moved the needle using the handwheel and cut away the knotted thread. I began sewing again but instead of starting at the edge began about a half inch down, forward stitched, reversed to lock threads and problem repeated and received the message to "Stop for safety purposes". Did that. Referred to the manual, tried manual recommendation. Did not work. I


... Vacuums

The needle keeps breaking on my Janome J3-18 sewing machiene and the thread tension seems too tight. However the tension is set at 5 and it is standard thread and I'm using standard fabric. What's going wrong?


... Vacuums

I have a janome js1008 limited edition that we perchased for our daughters 14th birt6hauy several years ago and i need instructions on how to thread it & thread the bobbin PLEASE!!


... Vacuums

Janome overlocker 534 DR Lost user manual just need to check on the threading ... How to thread overlocker? Thanks


... Vacuums

We have a vogue stitch janome model 539 115v sewing machine. we were trying to sew but, the thread is not picking up from the bobbin. the thread keeps breaking and we are unsure what tension setting should be used for cotton cloting. please help. thanks! tom staron


... Vacuums

I just had this machine delivered yesterday (Janome Magnolia 7330). When I sew a straight seam (all I've tried so far) I get loops at the underside of the fabric. I adjusted the upper thread tension, but that did not help. In fact the loops got larger as I increased the tension. My thought is that I don't have the machine threaded correctly. Thanks!


Your problem is in the tension adjustment. also check the stitch lengths. \012\012Kdog ... Vacuums

How to thread a singer 9540 sewing machine - Vacuums


... Vacuums

Janome harmony 2049 - where to oil it - Vacuums


... Vacuums

Replacement parts... I've got a 3594 Bissell and the belt has come completely off. In the process of breaking, it bent the metal guide inside the motor housing and melted the plastic that holds the guide and keeps the belt inline with the roller. I've got it running again by using a screw I filed all the threads off of, but it only works for 10 minutes at a time before breaking another belt. This process is getting expensive, as it usually takes 30 minutes to completely vacuum the house. Is ther


Most likely it is the top cover that needs to be replaced, part #2031238 and is around $30. It would have that guide on it. ... Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum

Users manual for janome mystyle 30 - Vacuums


Hello,I will advice you check manualnguide.com to search for the manual os your device as requested.Take care. ... Vacuums

I am replacing the fan on a sanitaire vacuum - I need to know if the threads are regular or reverse


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=562921\015\012Generic problem for all Vacuums\015\012I am replacing the fan\015\012posted by mchll_trvn o ... Vacuums

Janome XC33 Instruction Book - Vacuums


... Vacuums

Manual for Janome Sewing Machine model 106 - Vacuums


Try looking on the Janome site.\015\012They don't have one for the 106 but they do have manuals available for similar machines.\015\012http://www.janome.co ... Vacuums

Folks, My wife and I own a three-year-old Hoover U6434-900 self-propelled "Wind Tunnel" upright vacuum cleaner. The problem is that, even on the highest setting (front-end as high as possible), it gets bogged-down in even shallow pile carpet to the point that the brush stops. I've cleaned the machine thoroughly, pulling hair, thread, dental floss and such from the brush (and everywhere else), including unscrewing the brush end caps and pulling out the cat hair mats which formed in there.


Check to see if the V belt sits too deep in the brushroll groove, if it sits too deep you will need to replace the brushroll. the top of the belt should be about flush with the brushroll. also you have to take the screws out of the self propelled uni ... Vacuums

Janome 5812 - Vacuums


... Vacuums

How do you thread a Janome Memory Craft 6000 sewing machine. We have lost our manual and cannot remember. Look forward to your reply. Thank you. Betty


... Vacuums

Ho do I thread the Empisal EM 250 Bobbin? - Vacuums


... Vacuums

Janome MW3018LE manual - Vacuums


... Vacuums

I have a janome BCC-30 sewing machine and the upper thread has started to break and fly out of the needle while I am sewing. The problem continues even when I change the tension dial.


... Vacuums

Brushes won't turn. have gotten out all thread etc, wound around the brush. have put vacuum in proper position and turned on the brush button


The brushes are usually driven by a belt that connects to one of the ends. They break. Check to see if yours has. ... Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 1.9203 seconds