Having problems with your Vacuums ?

Just need the names of the service centers in my area


Answers :

Good evening,

Which brand/model do you need serviced? I'd be happy to find you one.

In general, most manufacturers list authorized servicing dealers on their website, or provide a 800 number you can contact to talk to Customer Service, which can also provide the information.

Please clarify and I will follow up. Let me know!

Thanks,
~PCF
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Just need the names of the service centers in my area


Good evening,Which brand/model do you need serviced? I'd be happy to find you one.In general, most manufacturers list authorized servicing dealers on their website, or provide a 800 number you can contact to talk to Customer ... Vacuums

Both drive and slave belts are intact and tight on the Bissell ProHeat 2x. The brushes will not turn. When last turned on, there was a loud snap noise and something is broken in the power head drive train. Can we repair this or is there a service center near the Hastings, MI area? We need this fixed ASAP. Thank you.


Sounds likely you should take it in your drive gears might have a problem ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

My older Dyson DC14 (the purple one) early model with a clutch on the beater bar belt needs a clutch replacement. The bar has been cleaned and there are no worn or damaged parts so I conclude that the clutch at the motor end of the belt needs to be replaced. I can find the part online but no instructions on how to disassemble the vacuum to get to and replace it. Dysons only advice is to give me the address and phone of the nearest service center. Can you help me?


Have a look at www.dysonmedic.com which has some very useful info on dismantling and repairing Dysons.\015\012\015\012Although this site doesnt actually cover the DC1 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Eureka Boss Smart Vac 4870 evidentally overheated. Allowed unit to cool and observed a spark/smoke at outlet when it was replugged into the power outlet. Unit will not power up now. Circuit breakers in the home are fine. Is there a fuse that can be replaced in the unit? Does the unit need to be serviced? Is there a Eureka Authorized Service Center in Orlando, Florida?


Seems Eureka is putting faulty, insufficient wiring in many models, most especially my model (if you do a search of this site, you will be how many people have experienced fried wires and switches). There should be a class-action lawsuit in my opini ... Vacuums

Broken fan need a repair man or service centre. If not a replacement fan for self repair. I live on the Gold Coast Ray is my name. Kirby Legend 1 model 2HE


Http://www.ultimatesanitarysupply.com/pdfs/VacuumMaintenance.pdf\015\012\015\012see the link ... Kirby Vacuums

I would like to know the name and address of Bissell Dealer in the Salisbury MD area? I need to buy cleaning products. Ben J. Ames


Generic problem for all Vacuums I would like to know I would like to know the name and address of Bissell Dealer in the Salisbury MD area? I need to buy cleaning products. Ben J. Ames You can buy Bissell products @ your local ... Vacuums

I have a WindTunnel Hoover vacuumn that is less than 1 year old. The on-off switch is worn out and the carpet height adjuster does not connect. Where is my closest service center? (So I can use my warranty) My zipcode is 58203. My phone number is: 1-201-791-3492. My email address is: [email protected] Of course, I need help as soon as possible. Thank you, Audrey Cooper


According to Hoover's web site the closest service center is \015\012\015\012\015\012\015\012MJB MAYTAG HOME APPL CENTER \015\012418 BELTRAMI AVE NWBEMIDJI MN 56601 218-751-2420\015\012which appears to be over 100 miles from you. I have ... Hoover Vacuums

My Tatung rice cooker TAC-11KSD needs a new part: the wire containing the thermal cutoff fuse. Where can I find one? I've emailed Tatung US Service Center, but never got response.


... Vacuums

Do you have a dyson service center in tampa bay area?


... Vacuums

I need to replace the brushbaron my DC17 Animal model Dyson. It's almost four years old. I can't find the correct part number on the Dyson Website and I can't seem to find a Dyson repair center in Albuquerque, NM. What are my alternatives? If I can't service this machine without returning it to Dyson, I won't ever buy another one.


Hi,\015\012\015\012The original Dyson part number for the brush bar (often called brush roll) is: 911961-01\015\012\015\012If you type the above part number into Google Products (click link below) you will get a list of suppli ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Is there service center in metro manila philippine? i need replacement filter of Hepa cyclonic 1800 vacuum cleaner


... Vacuums

POWER CORD DAMAGED AND NEEDS REPLACING. wHAT IS THE SECRET TO OPENING THE SWITCH MECHANISM ON MY DC03. I LIVE IN A REMOTE AREA AND CAN'T JUST DUCK IN TO A SERVICE AGENT. CHEERS, KINGSLEY DYSON


I am not an expert to this kind of machine but I can share with you this link below which I am sure would be a big help to you. Good luck. http://www.sparesaver.com/help-and-support/dyson-section/dyson-hints-and-tips-451/dyson-dc03-hints- ... Dyson Vacuums

Need name of store to have serviced - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Dear 1bamanana13,\015\012\015\012Dyson recommends you have your vac serviced locally.Look in the phone book yellow pages for a vac repair/store near you.Dyson has a poor support site that does sell a few parts like the User Gu ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Need to find a repair company to service our Nilfisk vacuum in the Lehigh Valley, PA area.


Where can i find a hoover service centre in leyton or stratford in london? ... Nilfisk Vacuums

I need the locations of dyson service centers


If you call dyson at 1-866-693-9766 they will give you a list of locations near you. And if there aren't any locations near you they will help you arrange to ship it directly to them(don't know about the cost of shipping it though). Good luck. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Something came loose inside my Animal and it makes a wild noise, im on Long Island NY and need a service center.


There is a close factory outlet in Buffalo. They do all the dyson warrnaty work. It sounds like you have a clutch problem. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson service center locations


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Bissell ProHeat Clearview Steam Cleaner - need steps to clean the clear input area. I have removed the four screws and need to know how to finish the removal of the clear plastic input area.


For the clear outer nozzle, there are 2 screws holding it in place. Remove those, then from the bottom lift it up. Sometimes the seal holds it really tight and you may have to carefully pry on the sides until it loosens up. Then when you put it ba ... Bissell Vacuums

Service problem MY NAME IS AJAY GAUR AND I BELONG TO DEHRADUN.LAST DECEMBER 07,WHEN MY SERVICE REQUIRED FOR WATER PURIFIER THEN YOUR COMPANY TOLD ME THAT IF U CAN CONTRACT FOR TWO YEARS. WE WILL PROVIDE FREE SERVICE,THE FIRST SERVICE IS ON 15-06-08 MR.SANTOSH JOSHI MOB.NO.9760356529.THAT MAN COME AND CHANGE THE CANDLE AND CARBON.AFTER THAT MY WATER PURIFIER IS NOT WORKING. FROM26-06-08 NO WATER CAME THROUGH PURIFIER I HAD DO SO MANY COMPLAINT BUT NO RESULT CAME. PLEASE TELL ME WHAT CAN I DO.BECA


Remove the inlet pipe of u v chamber and pass the water for 10 mins. again reconnect and switch the machine on.......should work now :) ... Eureka 431A Optima Bagless Upright Vacuum

I have an Elextrolux Discovery Advantage(upright) . I need to replace the lower hose. Unfortunately the hose comes out of the roller/feeder area fine but I believe it is held in with a screw in the canaster area. My question is this: How can i open the Canaster area - ther is no isable screws


It's simply screwed into the tank. Simply unscrew in a clock-wise direction to remove. To install the new hose, screw in in a counter-clockwise direction. This is opposite the direction normally used for regular screws. \015\012You don't ne ... Electrolux Vacuums

Nearest service center in dubai


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I have the original Fantom, no extra name with it, and need a fan belt...which kind of Fantom do I buy from. Also need a manual for that model # F11062 00 style # GF7-1


... Fantom Vacums Cyclone XT Upright Vacuum

Need repairs need a dealer in the area for repairs.. minnesota 55447


This is the list of the dealers i could find.Please do rate my solution if accepted.\015\012\015\012\015\012\015\012CREATIVE SEWING CENTERS\015\012\011\011\011\011\011\011\011\011\011\011\011\011\011\011\011\011\011\011\015\012\011 ... Royal 4000 Classic Bagged Upright Vacuum

HI my DC25 animal : the rollers and beater bar area needs cleaning how do i access the area? thanks in advance


... Dyson DC25 Vacuum

How do I replace the Powercord on a Fantom XT64K Vacuum. The powercord shorted where is comes out of teh housing. I need to open up the unit & replace but need a service manual of instructions. Thanks Father Lenny


I have done this several times, it's some what simple just take the unit apart and use the old diogram to replace the new one. Or take a digital photo of it opened so you have your own scematic. You should be able to purchess the cord at your local h ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0480 seconds