Having problems with your Vacuums ?

Eureka ez kleen brush roll not working? - Vacuums

Answers :

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Eureka ez kleen brush roll not working? - Vacuums

... Vacuums

Brush Roll belt stops turning durring vacuuming on WindTunnel self-propelled, v belt is a little loose with handle down. Tensioning roll is engaged OK, but fully at the end of its travel. Replaced belts flat and v, but still stops turning even on high carpet setting when vacuuming. Carpet setting and height adjustment appears to be working OK, roll is clean and turns easily when out. Also turns easily until it engages the carpet. Self propel function works just fine.

... Hoover U6485900 Bagged Upright Vacuum

Eureka boss 5893A brush roll does not work

You have to prss the pedal and lean it back the brush roll wil enguage ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

The power brush floor rug attachment on my Eureka 6997 A Oxygen Canister Vacuum goes on an off as I use it. I replaced the The power cord from the handle has 2 plug in connections: 1 at the handle / upper wand 1 at the lower wand top of the power brush attachment I replaced the entire wand assembly and it worked great for a year or so and now it's doing the same thing again. I was told to keep the power switch on the handle set to off when connecting the power brush attachment or it will bu

This is from the prongs not making a good connection causing an arch inside the plugg causing what looks like rust on the plugg. I would try snugging up the connection by squeezing the female section to get a better connection on the prongs when it i ... Vacuums

I have a canister style vacuum. The brush roll has stopped rolling on carpet. When turned over, it rolls fine. I have disassembled and cleaned out hair and that didn't work. Any help would be very much appreciated. Thank you. Martha

You need a new belt. They stretch after awhile and won't turn the brush roll under load. ... Vacuums

Eureka 2999 dvz brush roll - Eureka Uno 2998AZ Bagless Upright Vacuum

... Eureka Uno 2998AZ Bagless Upright Vacuum

Eureka steam extractor brushes not working - Eureka Atlantis 2595A Upright Wet/Dry Vacuum

... Eureka Atlantis 2595A Upright Wet/Dry Vacuum

Eureka multicyclonic brush roll not spinning - Eureka 3276AZ Pet Lover Bagless Upright Vacuum

... Eureka 3276AZ Pet Lover Bagless Upright Vacuum

Eureka 4870 vacuum brushroll control doesn't work

Use two hands to presscontroll button upward until it snaps in place. ... Eureka Smartvac 4870 Bagged Upright Vacuum

I have a Hoover Linx cordless vacuum stick and it is not picking up anything. The motor works, the brush rolls but it spits out dirt instead of sucking it up.

... Hoover Platinum LiNX Cordless Stick Vacuum

Brush wont roll - Eureka Smartvac 4870 Bagged Upright Vacuum

Check the belt it may have come off or broke this link is for the manualhttp://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000072931.p ... Eureka Smartvac 4870 Bagged Upright Vacuum

How can i make my roll brush move on my eureka vacumn AS1101 A the belt is not broke so why wouldnt it work

... Vacuums

The belt on my used Eureka Boss 5857 upright slips off the end of the motor shaft every time the vacuum is used. When I turn the brush roll slowly by hand, the belt walks toward the end of the shaft. It looks like there was a plastic projection from the base that snapped off, and maybe that plastic piece used to block the belt from falling off. Do I need to try to reconstruct that plastic piece, or is something else wrong?

... Eureka 5856BVZ Boss Bagless Upright Cyclonic Vacuum

Hoover tempo It will still **** through the hose but not from the brush-bottom. Can't find a reset button. Vacuum was GREAT and is only about three weeks old. I know it still works because it has plenty of strength through hose, but won't pick up when rolled across floor. thanks! Marian

Sounds like a blockage or belt off in the foot of the vacuum. there is no reset button on this model. ... Hoover Tempo Widepath Upright Vacuum - Blue

I had to empty the canister and when I put it back on and turned on the vacuum, the suction does not turn on. The brushes are rolling and the attachment suction works fine. Any suggestions?

... Eureka 431A Optima Bagless Upright Vacuum

Brush roll turning very slow - Eureka 5893AVZ Bagless Upright Cyclonic Vacuum

You might need to clean out the roller brush. Here is the manual that has instructions:Owner's Guide (1.5 MB download)If you need a ... Eureka 5893AVZ Bagless Upright Cyclonic Vacuum

I have a Eureka The Boss Mini (Model # 442) vacuum cleaner. It is not working properly sometimes Today I did a cleaned the roller brush thoroughly and powered it on to see if it spins at all. It spins only in Carpet model, but stops sometimes. Please can you tell me what could be the problem?

... Electrolux Vacuums

The brush roll on my Eureka Bagless The Boss 4 dimension cleaning vaccum itsn't working. How do I fix it?

Take either the plate over the brush roll off, if it doesn't come off, then the top cover comes off, should be 2 or 3 screws on the top to remove. Then you can get to the belt and brush roll. Check the brush roll, make sure the ends turn freely, if ... Eureka Vacuums

My vacum roller brush dosenot work - Eureka 2961AVZ Bagless Upright Vacuum

The most common failure there is the drive belt from the motor to the brushes has failed. Consult your local vacuum store for a replacement. Normally they are fairly easy to change. Check and see if the brush is free wheeling or needs a push to get ... Eureka 2961AVZ Bagless Upright Vacuum

The rotating brush stopped working after it grabbed a matress skirt. The skirt did not roll up into the vacuum. Is there a rest button?

Did it smell like burning rubber? If it did the belt is probably stuck and needs to be replaced. You can look at the little black belt on the bottom of the vacuum and see for yourself.You may have a extra belt that came with the vacuum. I fnot you ca ... Dirt Devil Vacuums

My eureka optima vacuum shuts off after 5 minutes of use, the brush still spins, but no suction. If I wait 30 minutes, it will work again, for 5 minutes.

... Eureka 431A Optima Bagless Upright Vacuum

We have the Eureka EZ Kleen upright. We have suction through the hoses but not the main vacuum. The brush turns fine but the vacume does not **** anything up.


Brush roll broken - Eureka Surfacemax 200 Bagless Upright Vacuum

... Eureka Surfacemax 200 Bagless Upright Vacuum

Replace brush roll belt - Eureka Whirlwind LiteSpeed 5843 Upright Vacuum

... Eureka Whirlwind LiteSpeed 5843 Upright Vacuum

Now that I just fixed my Lux Legacy canister vacuum, I need help on my other Electrolux Regency Series upright! The vacuum works fine but the rotating brush does not work and the brush motor does not turn on. Tried cleaning the brush and hitting hte reset button to no avail. This upright has a triple setting switch and I checked the each of the wires seem to be attached. Tried rotating the brush by hand and it would not budge. Was going to "encourage" the brush to turn with a set of articula

There are a couple rectangular holes on the bottom of the power nozzle, beside the wheels. These have tabs in them that need released with a standard screwdriver. \015\012 ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 1.3058 seconds