Having problems with your Vacuums ?

Extension handle wont go nack down in dyson - Vacuums


Answers :

Hi there,

I'm sorry to hear you're having difficulties replacing the handle on your Dyson. I'm unable to provide specific instructions for resolving this as you haven't mentioned which model of Dyson you own. However, if you visit www.dyson.com and click 'Support', you should be able to identify your machine from the list - our online support guides may be of use.

If you'd prefer to speak to someone in person, please get in touch with our Helpline by calling free on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Extension handle wont go nack down in dyson - Vacuums


Hi there,I'm sorry to hear you're having difficulties replacing the handle on your Dyson. I'm unable to provide specific instructions for resolving this as you haven't mentioned which model of Dyson you own. However, if you visit ... Vacuums

Have Dyson DC 14. When tilt to vacuum, the handle and coiled hose comes away from the unit. The problem started when the little purple ridged curved part on front of vacuum cleaner right below handle came loose and a spring fell out from somewhere--don't know where. I pushed on the purple ridge part and it snapped back on. Now, can't get it loose again, don't know where the spring goes, and handle still comes loose from vacuum.


I'm not positive whether or not this is the wand handle because there are several versions of the DC14. However the device the locks and unlocks the wand in place is pretty similar between all the versions.The first picture is the wand re ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson wont start - Dyson "Stowaway" Canister Vacuum Vacuum


... Dyson "Stowaway" Canister Vacuum Vacuum

My dyson dc17 vacuum handle won't recline. - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


The under carriage is misaligned itself or has broken. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Why doesnt my Dyson auto adjust on our carpet? We have a taller, soft carpet and it digs into it, making it very difficult to vacuum. We have had the vacuum for about a year at another house and it worked GREAT on the berber......our new has a tall carpet somewhat like shaved berber and now the vacuum wont work.


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I just received an older model Dyson DCo7 animal vacuum. When it is turned on and you are vacuuming, should there be suction at the top of the handle while vacuuming the floor?


No it should not ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson dc40 sucks from Hose(at the handle) while vacuuming floors


... Dyson Dc40 Multi Floor Lightweight Ball Upright Vacuum Cleaner

I have a hoover windtunnel upright vacuum, It will not shut off and I have to unplug it to do so. If I take apart the upper handle and manually flip the internal switch it works just fine, only when using the external switch on the handle, wont shut off.


This is a common problem with this machine. The switch has too much resistance to be turned on and off with the switch button and rod. If you put in a new switch, ( # 28161075 ), your problem should be fixed. ... Vacuums

Dyson DC28 handle stuck in upright position - Dyson Ball DC24 Bagless Upright Vacuum


You DO NOT have to take your machine to a "certified technician" to fix this problem. Stand behind your machine, lean over and look at the front: Right in the center of the opening between the machine and the beater bar head, you will see ... Dyson Ball DC24 Bagless Upright Vacuum

Cannot put handle on dyson - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi,Did you receive the handle with the wand already attached? It should be. Then, to get it into the hose pres the wand release button on the end of the hose and slide the wand into the hose. The wand should then be pushed into the slot o ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson dc14 wont turn on at all - Dyson DC14 All Floors Upright Vacuum Cleaner


Hi I would suggest you first check the Fuse in the plug. This is quite common. \012\012If after chnaging the fuse the machine still doesnt work then please come back to us. Let us know that you have checked the fuse andthe machine still w ... Dyson DC14 All Floors Upright Vacuum Cleaner

DYSON DC14 While vacuuming the living room, the rotating brush started making an awful loud grinding sound. We opened the intake port, cleaned the brush but to no avail sound still persists once you lower the vacuum handle in an attempt to clean. Was wondering if there was anything that can be done?


Take the bottom plate off and check the belt. Also, rotate the brush by hand - it should turn with only a moderate resistance from the belt, or very little if you take the belt off. If it is hard to turn, or if the belt is stripped-out right where it ... Vacuums

I need the part # for a Dyson DC07 handle - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi there the part number for the DC07 handle is 904247-49. \012if you are in Australia you can get these from vacuumspot.\012Happy Vacuuming! ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson d17 will only stay on if the handle is tilted back and it's not sucking at all....although it's running. When i stand the vacuum up with the handle upright, it cuts off.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson dc25 wand stuck wrong way in handle - Dyson DC25 Vacuum


... Dyson DC25 Vacuum

My Dyson vacuum cleaner wont close & Open to the upright position to allow vacuuming to take place


... Dyson DC07 Bagless Upright Cyclonic Vacuum

I have a Dyson 15 "the ball". The beater bar will only rotate if the vacuum is engaged and the handle at a high angle. The bar stops when I drop the handle to a lower position. The condition is repeatable. Can you provide part and repair instructions?


If air is leaking in somewhere, you will not have any suction.\015\012\015\012\015\012Also there are some possibilities that has to be checked to confirm the fault.The problem is minor but the possibilities are too much for this pa ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Dyson dc17 hose will not come out/ handle wont release from machine. i've pulled the metal rod up all the way and the handle still won't come away from the machine so i can't use the hose and attachments. anyone know what the problem might be?


Hi there, it is possible that you have a blockage in the wand/hose assembly which is making this difficult to remove. If you are able to remove it to check for this, please contact our Helpline on 1866MYDYSON so that one of our advisors c ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Motor loud I have a dyson dc17..recently when i turned it on and pulled the handle down to vacuum the motor was very loud..put the handle in the upright position it is quiet.any suggestions?


When you put the handle down it turns on the brush roll. you may need to clean the brush roll or replce it if the bearings are bad.also clutch and 2 belts are started when putting handle down for brush operation. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson animal dc 28 wont recline and therefore wont vacuum floors- how to fix?


You DO NOT have to take your machine to a "certified technician" to fix this problem. See the photo above????? Simply slide a thin, flat-head screwdriver down and magically the machine will release. NOW: once it\\'s released, simply examine the area ... Dyson DC28 Animal Bagless Upright Vacuum

My dyson exrenable tube wont lock in - Dyson Ball DC24 Bagless Upright Vacuum


Hi there, its Darran at Dyson.Sorry to hear of the problem that you are experiencing with your Dyson vacuum cleaner. If you are having trouble locating the wand handle back inside the hose, it could be that the hose itself is ... Dyson Ball DC24 Bagless Upright Vacuum

The brush wont turn on my dyson DC 14 - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Sounds\015\012 as if you need to replace the brush belt.JimLet me know if this helps. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Handle vacuum no suction - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi there, \012I have made a video of the two most likely causes for lack of suction in the handle of your dyson DC07. Watch t ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson wont turn on and its a bit smelly - Dyson DC07 Bagless Upright Cyclonic Vacuum


It sounds like the motor has overheated and has now been irrepairable damaged. The motor has a built in over-current trip to protect itself (and you if it seriously overheated and caught fire). This normally automatically resets itself, however ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson ball DC24 brushes wont go round - Dyson Ball DC24 Bagless Upright Vacuum


... Dyson Ball DC24 Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1290 seconds