Having problems with your Vacuums ?

Eureka sanitaire SC412 thermal reset

\015 I need to reset the thermal reset button. I have never opened by back pack vacuum before. Does it have a particular color and does it have to be reset to a particular point or do I just press a button?\015

Answers :

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=658043\015\012Generic problem for all Vacuums
\015\012Eureka sanitaire SC412 thermal reset
\015\012Posted by 5star on Jun 09, 200
\015\012I need to reset the thermal reset button. I have never opened by back pack vacuum before. Does it have a particular color and does it have to be reset to a particular point or do I just press a button?
\015\012 \015\012Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Eureka / Sanitaire SC412 Thermal Reset. I would contact the manufacturer to see if your particular model # has one, just give them the model # and the serial #. So I suggest that you get an owner’s manual from the manufacturer on you particular model so that if happens again, you will be prepared. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

\015\012http://www.eureka.com Customer Service 1-800-282-2886
\015\012Customer Service Dept for U.S.
\015\012Electrolux Home Care Products
\015\012P.O. Box 3900
\015\012Peoria. IL 61612
\015\012Electrolux Home Care Products
\015\0125855 Terry Fox Way
\015\012Mississauga, Ontario L5V 3E4
\015\012Hours of Operation
\015\012Monday thru Friday 8:00am to 7:30pm CST
\015\012Saturday and Sunday 10:00am to 6:30pm CST
\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Eureka sanitaire SC412 thermal reset

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=658043\015\012Generic problem for all Vacuums\015\012Eureka sanitaire SC412 thermal reset\015\012 ... Vacuums

The thermal motor protector on sears model 116.35912 Kenmore vacuum won't reset. The manual says to wait 30 minutes and the thermal protector will reset on it's own. It appears I would have to take the vacuum apart to get to the thermal protector. Is it worth the effort or should I trash the vacuum?

... Kenmore Vacuums

I have a Eureka Boss Model 411... I need to know where the reset button is for the suction motor. The canister was clogged on the backside, I didn't see it and the suction motor shut off. I have cleared the obstruction, but don't know where the reset is for that motor. I know how to reset the brush head motor.

If your vacuum motor overheats, it will stop working. it will start working again once it cools. ... Eureka 411A Upright Vacuum

Possible reset on Thermal Cut-Off

This is not really expert advise but I have a vaccuum with hepa filters and if the filters get dirty My vaccuum acts like your what you are describing. ... Eureka Vacuums

Bissell Healthy Home Vacuum No Power - Reset Thermal Protector?

Try to re-install the handle. On occasion if the handle is not installed properly and secured tightly the unit may experience intermittent power. ... Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum

Thermal switch on eureka vacuum 4870 - Eureka Smartvac 4870 Bagged Upright Vacuum

... Eureka Smartvac 4870 Bagged Upright Vacuum

My Steril Aire upright would not turn on after the bag was full and I replaced it. Turns out there is a thermal reset button right by the sticker that you have to press to reset it.

... Vacuums

Eureka model 4716 type avz reset button - Eureka Vacuums

... Eureka Vacuums

How do you reset a eureka boss as1001a - Eureka As1001a Vacuum

... Eureka As1001a Vacuum

Dyson DC07 Vacume cleaner trips on thermal after 10 min motor not excesive hot resets after 15 min has been doing this for the last 3 mths. Could it be faulty thermal or motor overheat how can I check without changing motor

First, check both filters on that unit. the premotor filter on the side, and the hepa filter underneath the canister. if those filters are clean move through the suction channel and look for a clog or obstruction. also make sure the canister is clean ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Reset button on thermal cut-off

... Vacuums

Eureka Capture won't turn on after thermal cutoff

Return it for an exchange, under warranty ... Vacuums

Reset button for Eureka 431 bagless upright???Where is it?!

If the red light is one the says "check brushroll" then you have to take it apart to find out what the problem is. It might be that the roll has too much stuff rapped around it so you have to take it out and clean. It could also be the rubber belt is ... Eureka 431A Optima Bagless Upright Vacuum

Where is the reset button on my eureka canister vac

With out knowing the model # i can't say for sure. however most of the eureka canister vacuum's ive worked on do not have a reset button. If its not working is probably the cord or switch that has gone bad. hope this helps ... Eureka Vacuums

It just doesnt power on - Eureka Sanitaire S3686 Bagged Canister Vacuum

It just doesn't power on ... Eureka Sanitaire S3686 Bagged Canister Vacuum

I have a Simplicity model 6970 upright vacuum. It picks up great and there is no smell but it will over heat in about ten minutes and shut down. There are no clogs. Once cool, I hit the thermal reset on the back at it works great again until it overheats again.

It could be electrical on the inside of the vaccum or your belt is the wrong size therefore making it over heat. Hope this helps?!Please rate and comment - Thank You ... Vacuums

Eureka model 7605 type A - 'the boss' lite. would not power on yesterday. working perfectly before. i replaced full bag with clean bag this morning. still won't power on. is there a reset button, or anything else i can try? Thank You!

... Eureka Vacuums

Can you reset the thermal overload - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

No. It resets itself when it has cooled sufficiently. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Does have miele 4310 vacuum cleaner thermal fuse? If yes, how to reset it?

... Miele S318 Bagged Canister Vacuum

We have the Eureka Capture and it seems the vacumm got hot and stopped, now it won't run. Is there a reset button?

If you go to this URL:\015\012\015\012http://www.ereplacementparts.com/eureka-8853avz-upright-vacuum-parts-c-108750_108773_109342.html\015\012\015\012you will see that item #25 is listed as a circuit protector. You can locate it on the e ... Eureka Capture Upright Vacuum Vacuum

I have a Eureka Whirlwind lite ''The Boss'' and it stopped in mid-vacuum. Does it have a reset button?

... Vacuums

Hello, I have a Eureka Sanitaire upright vacuum. It is not picking up as well it usual and I notice it no longer has that deep motor sound. What do you suggest?

Does there seem to be good air-flow and suction? If not, look for a blockage somewhere. Otherwise (and more likely because of what you say about the sound), look to the brush roller. Does it rotate when the machine's switched on? If so, maybe the bri ... Eureka Sanitaire Commercial SC785 Bagged Upright Vacuum

Eureka 5893avz 4d vacuum brush motor will not run. Push reset botton doesn't start. where can I get a motor. [email protected] Thank you

... Eureka 5893AVZ Bagless Upright Cyclonic Vacuum

Hoover Model U6425-920, Series Q 12.0. runs 3-5 minutes, shuts down on thermal reset. motor shaft and brush both turn freely. cannot detect any roughniss at all in shaft turning.

... Hoover Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0411 seconds