Having problems with your Vacuums ?

Why does it keep stopping

\015 It runs for 30 seconds stops wait a short while and does the same again\015

Answers :

Service it
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The agitator on my kenmore progressive vacuum won't keep going. It keeps stopping while vacuuming.


This sounds like the belt that drives the beater bar on the vacuum. The beater bar bearings and brushes could be plugged with debris and/or the belt is simply worn out and needs to be replaced. Unplug the vacuum, turn it over and look for clogging. ... Vacuums

I have a vacuum cleaner model Z5245 and the flexible hose keeps sucking together and stopping suction. This is the bit with the stop start controls on it. How do I repair this or replace it?


If theres a clog, then youll have to remove the entire section of hose from the vacuum and use a non blunt stick - bamboo sticks are excellent for this purpose. Stretch the whole hose out and put the stick down the hose until you can wriggle the stic ... Vacuums

Have model 3576-6 Bissell Cleanview II and drive belt keeps slipping off peg that is sticking out from motor pulley causing vacuum to stop working properly and brush to stop moving properly


... Vacuums

Power Head keeps cutting in and out while vacuuming???Canister motor keeps running but the power head starts and stops like there is a short or some loss of connection somewhere. Any ideas?


My kenmore progressive vacuum had the same problem. The electrical terminal at the bottom of the wand was corroded. I used a flat head screw driver to scrape the female portion of the connector as best as I could. I then took off the plastic cover on ... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

Dc 31 animal: even when fully charged keeps cutting out. stop for a moment & it starts then stops. Filter cleaned & checked.


Hi there,Sorry to hear you're having difficulties with your DC31 Animal. It's probably best if you get in touch with us directly, so one of our experts can run through some troubleshooting over the phone with you to identify the cause of ... Dyson DC31 Animal Bagless Handheld Cyclonic Vacuum

Vacuum Problem My dirt devil vacuum is losing suction and keeps clogging. All the dirt keeps sticking to the screen by the filter and then it would stop working. Also the hose does not have a strong suction power either. So what can I do?


The Bissell can have several filters in it, depending on the model. Some have a round hepa filter that is covered with a foam sleeve. This filter is located at the bottom of the dirt cup. Others have a foam filter that is located under the dirt cup i ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Why does my bissel proheat 2x model 8960 keeps stopping? the red valve door keeps getting shut


... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Keeps stopping. My Roomba Discovery says it has a full charge, but it runs for a few minutes, then stops and beeps and the status light comes on. If you press the clean button, it will start again and go for a few minutes before the same thing happens again.


Your battery isn't holding a charge ,buy a new battery ... iRobot Roomba Discovery SE Bagless Robotic Vacuum

My dyson won't stay on. I push the red power button and it begins to start but as soon as I stop pushing it, it stops. It will only work if I keep pushing down the start button the whole time I'm using it. HELP!!! I love my vacuum!


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Panasonic MC E3001 Vacuum keeps stopping after a short use and then will re start afetr a while to only stop again


... Panasonic 471 Bagged Upright Vacuum

Roller problem Roller keeps stopping. I've emptied the dustbin. removed the roller to see if it is clogged, but appears to be nothing impeding it.  It stops on a short napped rug, and even on the wood floor.  Is the spool that the roller slips into driven by a belt? Can I get in there behind the spool?


I have 3 Prontos, one in each part of the house. Two of mine had the rollers stop. I figured out the problem and it fixed both. Take the roller out by turning the plastic screw and popping the plate off. Pull all debris off the wheel that turns. ... Electrolux EL1000A2 Pronto Bagless Stick Cyclonic Vacuum

My roomba 400 series keeps stopping on its own


Take off the grill on the back of the bin. The round vacuum impeller is behind it. Make sure that's clean and free of debris. Run the Roomba with that little grill still off the bin-- is the impeller turning? If yes, you may have fixed it. If not, yo ... Roomba Robotic Floor Bagless Vacuum

Digital slim keeps stopping


... Dyson DC35 Multi Floor Digital Slim Cordless Vacuum

The belt keeps on slipping off causing the brushes to stop


Over time the belt stretches and gets to big to stay put all of the time. Get a new Hoover belt and install it. That will solve your problem ... Hoover S3755 WindTunnel Bagless Canister Vacuum

Simplicity infinity.36 vacuum keeps stopping, why?


... Simplicity 7850 Premier Bagged Canister Vacuum

OUR VACUUM CLEANER KEEPS STOPPING


... Morphy Richards Vacuums

HOOVER U3524 KEEPS STOPPING


Its overheating check to see if its cloged any where look behind brush roller \015\012 ... Vacuums

Dyson handheld vacuum keeps stopping


... Dyson DC35 Handheld Vacuum

On off switch keep coming off and the vacumn cleaner stops


... Miele S7280 Bagged Upright Vacuum

Why does it keep stopping


Service it ... Vacuums

Power nuzzle keeps stopping


Get a new "Short Cord". These have a habit of going bad at the connector. Only a couple of bucks. ... Electrolux UltraLux 2000 Bagged Canister Vacuum

My iRobot Roomba 560 starts spinning sporadically during the cleaning, and after over 3 minutes it complete stops and beeps 9 times. It is necessary to turn it on until it decides to work properly, and keep waiting for the next time the same failure will occur. I tried to reset it, and I have all the dust removed including from the bumper and sensors.


It's the bumper. Blow it out with compressed air and clean the cliff sensors. If you still get the 9-beep error, call support. ... iRobot Roomba 560 Robotic Vacuum

My bissell lift off's brush has stopped working and its lost suction.. also it keeps overheating... what do do.. its the bagless type


Brushes aren't turning ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Just stops and starts while vacuuming - won't keep running


Probably a loose wire or other electrical connection .Possibly a broken wire in the cord,if it flexes excessively in one spot or feels too warm the cord could be the trouble. ... Kirby G6 Bagged Upright Vacuum

My rumba keeps going backwards before stopping and locking up


Mine was doing this too. I think the stair sensors might have been dirty. I used compressed air to blow out the entire front of it and it started acting normal again. ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0292 seconds