Having problems with your Vacuums ?

Question-can I purchase a recovery tank front panel for Hoover Carpet Clean - F5853-900, series 17.9, serial number 069700345408? I can be reached at (304) 243-3788


Answers :

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=675962
\015\012Generic problem for all Vacuums
\015\012Question-can I purchase a recovery
\015\012Posted by dings on Jun 16, 2008
\015\012Question-can I purchase a recovery tank front panel for Hoover Carpet Clean - F5853-900, series 17.9, and serial number 069700345408?
I can be reached at (304) 243-3788

\015\012
\015\012Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You can contact the local factory authorized Hoover dealer in your area and they might have a good used part or they may have a new one in stock or they can order it for you if you give them the brand name and model #, serial # or choice #2 is that you can contact the Hoover Factory Parts Dept and they can ship you out one recovery tank front panel for the Hoover Carpet Clean F5853-900 Series 17.9 and serial number #069700345408.

\015\012So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
\015\012http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.

\015\012
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Oregon Scientific BAR888 has 5 windows, 1. temperature, 2. humidity, 3. mb/hPa or inHg (switch at the back), 4. bars showing pressure changes over 24 hours, and 5. time/date. Window 3 gives an option to set something between 0 and 2500. Oregon say they only have one set of instructions for the BAR888 but they do not match my instrument as there is nothing included for my window 3. Trouble is I don't know what the 0 to 2500 relates to and therefore don't know what to set it at.(My model does n


... Vacuums

Question-can I purchase a recovery tank front panel for Hoover Carpet Clean - F5853-900, series 17.9, serial number 069700345408? I can be reached at (304) 243-3788


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=675962\015\012Generic problem for all Vacuums\015\012Question-can I purchase a recovery\015\012Posted b ... Vacuums

The number 2 light is blinking and I can't get the machine to run. I know that when number 1 light blinks its because of the lid. What is the problem for the number 2 light on the island oasis machine?


... Vacuums

Replaced Oreck power switch. 2 black leads and 1 white lead for switch. Posts marked 1, 2, and 3. 2 black wires to switch powers on. Connect white wire and breaker trips. Where does the white wire go?


Both black go to the switch. Power in - black to switch / white to white from motor. From motor - black to switch / white to white from power cord The black wire from the power hooks to ... Vacuums

I have a kenmore canister model number 116.2645083 I need a replacement motor. I was given 2 different numbers: 1. 4147248 2. AC92FAUX200 I can find the 2nd motor, but it doesnt have the 4 wires like the original one. Can you tell me if this is the right motor? Thanks Becky


Greetings from GoVcauum.com,\015\012\015\012Ok, so good news, I have looked up your model number for your Kenmore vacuum and found that your Kenhmore canister takes the motor ... Kenmore 25512/ 25513 Progressive Canister Vacuum

My wife and I own 6 IRobots: 1 Scuba 1 Dirt Dog 4 House cleaning vacume models All of them are not working, so I decided to try and solve the problems with two of them: One is a dirt dog and the other a house cleaning vacume Rumba. Given: Battery is fully charged Reaction: I start both of them. They run for about 2 to 3 seconds They come to an abrupt stop as if there is a rock in the gears. Help


Both of them have identical issues? Can you please provide the actual part number of them? It should be on the bottom or inside the battery area somewhere.ThanksTim ... iRobot 1100 Dirt Dog Bagless Robotic Vacuum

Kirby Vacuum Where is the serial number located on a Generation 3?  I was thinking of buying a newer model used.  Is there a way to check the number to make sure it's not stolen or how old it really is?


G3 was made 1990 -1993. Kirby sales people make big fuzz about Kirby\015\012vacuums sold online saying that it must be stolen to be so cheap. They\015\012probably just want to find distributors who sell new Kirby vacuums online so\015\012they are try ... Kirby Generation 3 Bagged Upright Vacuum

I was told I paid for a 3 year warranty, but my receipt says 2 years. It is difficult to read. I would like to get the the extra 2 month warranty, but can't seem to find the right registration. My sale number is S1023EE1 95353 8-08-10 My email is [email protected] Please reply. Thanks.


Hi,Please elaborate the problem providing us with the brand and model number of the product.We, at FixYa, provide technical and repair assistance for products. We do not handle warranty / support issues and you will have to co ... Vacuums

We have a series e rainbow cleaner. my wife had been using it i turned off and turned the canister up sie down to get the serial number. it would not turn back on.we need a new hose and thats why i was looking for the serial num. it has a rocker switch and the motor will work on low but will not run on the suction side. i have checked the wiring harnesses out as best i could without taken it all apart. im wondering if it may be the switch. it started once and then stopped.


There is one way to verify if it is the switch.It's kind of dangerous though,but not too bad.You need an extra piece of wire,fairly thick.I would use 4 guage myself.Hold it with pliers,just in case it gets hot.Turn the switch on and hold the wire to ... Rainbow Vacuums

We have a zenith dehumidifier model ZD300 & the bucket full light keeps flashing. the percentage number wont go higher than 1%. we have turned it off/on & unplugged it. When we do this it will reset to 40% for about 2 seconds & then goes back to 1% & the bucket full light starts flashing again. The bucket is empty & we have cleaned the filter. We have only had this dehumidifier about 7 months. Please help us.


I've had the same issue with mine. I am a 12 year refrigeration tech. I checked the float switch which would normally cause that indication light. However manually pushing the switch and then checking it with an electric meter that was not the case. ... Vacuums

I have 3 Woods RE1112R remote control outlets (on/off). The power went out so I have to reprogram them. The default setting is #1. How do I program the other two units for buttons #2 and 3? It's been so long I forget how to do it


... Vacuums

What is wrong with my polaris 9300 sport pool cleaner when i press the number 1 and the number 2 cycle on the connecting board the cleaner does not work and the light flash back and fourth on the board


... Polaris Pool Vacuums: 9300 Sport

My Bissell 9200 is not sucking the water into the dirty water resevoir. 1. The gasket on the clear-view seems fine. 2. The suction power just doesn't seem powerful enough (feeling with my hand). 3. The brushes turn fine and belt is fine (not sure if that even matters for this issue). Any help appreciated. Thanks, - Matt


Disassemble all lines and check to see if all O rings are installed. If cracked missing or stretched out of shape no suction will be provided ... Bissell 9200 Upright Vacuum

The handle was getting hot and we opened the handle and the wires were melted around the switch. I need a part number for it. All I have seen are 2 wire and this is a 3 wire. Thank you.


Had exactly the same problem with my upright Eureka Model 5893\015\012bagless. Eventually, the handle would get hot, and finally it just\015\012quit. When handle was disassembled, the wires were melted and it was\015\012toast. Ordered a switch aft ... Eureka 5893AVZ Bagless Upright Cyclonic Vacuum

I have an euro-pro steam cleaner model # sc505 that is about 2 years old. It has only been used a limited number of times, about 3 or 4 times. It now has a tightly sealed safety cap on it and it will not release allowing me to add water to the steamer to use it now. Any tips on fixing it? I'd love to have a products guide to items that are available for compatiability with our sharkie. We constantly see new items available and wonder will that product work with ours?? Thanks!


... Euro-Pro Shark SC-505 Handheld Steam Vacuum

I HAVE THE ELECTROLUX PRONTO 2-IN-1 SERIAL NUMBER 062408463 MODEL EL1000 I NEED A BATTERY


... Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne

I have an El Paso Chile Company 3 in 1 (Deep Fryer, Steamer & Slow Cooker) model number HSD-238C. The voltage is 120V / 60Hz. I am looking for the magnetic power cord.


... Vacuums

I have a Kenmore Elegance Vacuum with Dirt Sensor, Model # 116.30750400C, Serial number M41901532. When vacuuming the carpet the power head will work for 3-6 mins then automatically shut off, power is still there and lights work but the power head motor turns off and the suction stops. I will turn it off and on, check the outlet, flick the on off buttons...nothing. I will turn it off for a couple minutes and it turns back on and runs like normal. I've check the bags, filters, cleaned the hos


It is an electrical problem in the handle, if you can or know somebody that has any fix it ability it can be fixed in about ten minutes. Oh, and Sears SUCKS!! ... Kenmore 34612 Bagged Upright Vacuum

New Kirby I own the new Kirby Ultimate Diamond Edition..G Series and the brushes are running OK and everything but it seems to be blowing things out and not picking them up. Can you help me. My serial number if 7051201028


Is the bag emptor all of the way on? It will blow out if it isn't, But being new, you must have a number to call, it is under warranty so they should be able to help you out. ... Kirby G5 Bagged Upright Vacuum

My Bissell Proheat Turbo puts out too much water and cleaner and won't **** it back up like it should. Also when I use the attachments dirty water runs out the the hose when I am done. It's used a lot, I shampoo all the carpets about 2 times a month and I shampoo the funiture 1 time a month. I bought it about 3 months ago.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

I have a rival crock pot and want to know what the 3 settings on it are, 1 bar, 2 bars, and a picture of the crock pot


... Vacuums

I just got a coralife SPL-165R-JS replacement ballast for my saltwater aquarium but not sure how to hook up the output pins to the wires that go to the bulb. It says pin 1&2 - fila1 and pin 3&4 - fila2, what the heck does that mean? I can't find any wiring diagrams anywhere.


... Vacuums

1. Bissell Model #7350-C 08249C Carpet Cleaner 2. No soap & water is coming out of machine 3. Worked fine yesterday but isn't working today, we have disconnected it and cleaned all visable places.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I need a replacement reuseable cartridge filter for my genie shopvac sv300q (10 gallon) part number 23421r. I also need a 2 1/2 inch to 1 1/4 inch acessory adapter.


Look at the Big Box store for your parts ... ... Genie Company GV150 Wet/Dry Vacuum

I have a remote Hunter Ceiling Fan w/ remote 1-2-3 fan speed buttons and one on/off/dimmer light button. Model Number CP-9110R. It only has one pull string and it is for the light. I would like convert the light to work off of a simple wall on/off switch and the fan to be controlled by a 3-speed pull string. Can I by-pass all the sensors and make it work?


I see noone has answered so I will.Yes,it could be done,but if there is not a conversion kit for your fan,it would not be wise to do it.For starters,all of the things required would probably cost at least $15.Also,there is at least one tool you would ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0420 seconds