Having problems with your Vacuums ?

How do I change the belt on my Kirby Ultimate G?


Answers :

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=698957
\015\012Generic problem for all Vacuums
\015\012How do I change the
\015\012Posted by aaazdaddy on Jun 23, 2008
\015\012How do I change the belt on my Kirby Ultimate G?
\015\012
\015\012Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You can always check your owner’s manual but the Kirby has a dial on the front of the machine and you needs to dial the belt off of the fan pulley counter clock wise and to check to see if the Kirby bell housing will release @ the top so that you can remove the bell housing. If not then remove the bottom plate and take out the brushroll on one side and then slide the belt off of the brushroll. Then you can slide the new belt onto the brushroll to the center and then re-insert the Kirby brushroll with the screw heads facing downward then you can replace the bottom plate – then use the Kirby spoon or hook to dial the belt onto the fan pulley clock wise. Once that is done then plug in the Kirby and try to vacuum to see if the Kirby is picking up properly, if not repeat the process. If you have a question, feel free to contact your local vacuum cleaner dealer in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

\015\012http://kirby.com/ Customer Service – United States & Canada 1-800-494-8586
\015\012Hours 8:00 am to 5:00 pm (EST) U.S. & Canada Fax # 1 (216) 529-6146
\015\012Mail To:
\015\012Consumer Relations
\015\012The Kirby Company
\015\0121920 West 114 Street
\015\012Cleveland, OH 44102
\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I change the belt on a kirby ultimate g vacuum?


... Vacuums

How to change belt on the kirby ultimate g series diamond edition?


Hi There,\015\012\015\012Here's a very helpful video that we've shot showing you exactly how to replace the belt on a Kirby Generation series, including your Ultimate G. The video also shows you how to perform basic maintenance on your ... Kirby Ultimate G Bagged Upright Vacuum

How do I change the belt on my Kirby Ultimate G?


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=698957\015\012Generic problem for all Vacuums\015\012How do I change the\015\012Posted by aaazdaddy on ... Vacuums

Kirby belt my belt on my kirby ultimate g came off and I can't figure out how to get it back on please help!


Check out my online guide. I also have instruction manuals!\015\012\015\012http://reviews.e ... Kirby Ultimate G Bagged Upright Vacuum

Kirby G4D belt change . haven't changed the belt in years ! not sure who it goes on, or around the the spool housing ??


Changing belt on Kirby is a bit complicated. Kirby Co. just did not make it easy for their customers. You have to be careful when installing the brush roll back. Brush roll end caps have to be put back a certain way. For detailed instructions with pi ... Kirby G4 Bagged Upright Vacuum

Hi. This is a Kirby Vacuum model G7D. The Ultimate G series. Have problem with Neutral/ Drive lever on back. Very difficult to operate, very stiff and sometimes impossible to change gears. Torx head s


Manual on how to do it - take a look HERE ENJOY ... Vacuums

How do I change the belt on my KIRBY CLASSIC OMEGA 1 CB ?


... Vacuums

Changing a belt on kirby G6


I have written an online guide to help with this issue. Click on the link to view the guide.\015\012\015\012 \015\012\015\012 ... Kirby G6 Bagged Upright Vacuum

How to change belt on kirby heritage vacuum - Kirby Heritage II Vacuum


... Kirby Heritage II Vacuum

How to belt change on kirby clasic III - Kirby Vacuums


... Kirby Vacuums

How to change a band on a kirby vacuum? - Kirby Ultimate G Bagged Upright Vacuum


I think you mean belt??\015\012Take the nozzle of, remove the brush roll, put the a new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on t ... Kirby Ultimate G Bagged Upright Vacuum

How do i change my belt on the kirby g6 - Kirby G6 Bagged Upright Vacuum


Hello,For detailed, step by step instructions (with pictures):http://www.goodvac.com/articles.asp?id=143Hope this helps! Ple ... Kirby G6 Bagged Upright Vacuum

How to change belt on kirby heritage 2? - Kirby Heritage II Vacuum


... Kirby Heritage II Vacuum

I need to replace the belt on my kirby. - Kirby Ultimate G Bagged Upright Vacuum


If this is like my Kirby, there are colored slots on each end that slides the brush in and out and they are different sizes but the belt is connected in the middle. First take the bottom cover off. It should be made out of rubber and metal, and it po ... Kirby Ultimate G Bagged Upright Vacuum

How can I change the belt on the kirby vacuum shampooer brush roller. There is no way to snap the roller out and it seems that trying to unscrew the end isn't doing anything either.Model 5584 renovation group is what is written on the shampooer attachment. The kirby is a heritage model 2HD - purchased in the late 1980's.


... Kirby G6 Bagged Upright Vacuum

Change the belt on a Kirby - Kirby G4 Bagged Upright Vacuum


CHANGING THE BELT ON KIRBY G3 G4 G5 GSIX ULTIMATE ... Kirby G4 Bagged Upright Vacuum

Install kirby belt 301291 - Kirby Ultimate G Bagged Upright Vacuum


I just figured it out myself.\015\012\015\012Thanks ... Kirby Ultimate G Bagged Upright Vacuum

Cannot get the belt on my kirby sentria - Kirby Ultimate G Bagged Upright Vacuum


If you go to this Utube site you will be able to view different videos on the vacuum and even one about putting the belts on.\015\012\015\012Be well.\015\012\015\012Paul ... Kirby Ultimate G Bagged Upright Vacuum

Burning smell There is a burning smell when I run my Kirby Ultimate G.  The smell seems to be coming from the belt.  I looked at the brushes and they are spinning so the belt is working.  the Post on the vacuum is getting very hot not sure if that is normal.  What is causing this?


Unlock the sweeper brushes and take them out. on each end is a cup bearing and should be free of debris.then check around and under the belt and likely there is debris wrapped around it.the post is getting hot as your pulling too much of ... Kirby Ultimate G Bagged Upright Vacuum

Belt I need instrucions on changing the belt on a Kirby Ultima?


Go herehttp://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039Rob ... Kirby Ultimate G Bagged Upright Vacuum

Kirby tradition belt change


This video will give you full instructions ... Vacuums

How to install the belt ajuster on Kirby Ultimate G


Watch this video ... Kirby Vacuums

How do I change the belt on the diamond series kirby vacuum


Http://www.kirby.com/Portals/0/videos.htmlThis web page has a video that will show how to change the belt. ... Kirby Vacuums

How do you change the off swith in the Kirby ultimate G


First Thing to check is, Is it the pedal or the actuall switch.. the main switch is on the motor up under the cover and on the side\015\012it is a pain to get to and even worse to change out.\015\012most of the time it is the pedal that i ... Kirby Ultimate G Bagged Upright Vacuum

How do we change the belt on our Kirby Vacuum Cleaner


Here is a link to a video explaining how to change the belt on a Kirby vacuum. It is at the bottom of the pagehttp://www.totalvac.com/videos/kirby-vacuum-cleaners-videos.htm ... Kirby Heritage II Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0507 seconds